Jump to content
  • 0

Banana Pi M1 and BPI 7inch LCD


HugLee
 Share

Question

Armbianmonitor:

Hi all,

 

I've purchased a second hand banana pi M1 board with an BPI 7 inch LC connected on prarallel RGB.
The board and the LCD is working with last bananian distribution and https://github.com/BPI-SINOVOIP/BPI-M1-M1Plus-Configuration/blob/master/fex/BPI_M1_7lcd.fex.
I'm trying to make both working with Armbian but I'm lost.
I don't find the script.bin, /boot/script.bin or anywhere.

And no idea how to set /boot/armbianEnv.txt for the LCD.

 

The kernel have been rebuilded using this topic.

 

Any help will be apreciate.

Regards

Hugues

Link to comment
Share on other sites

1 answer to this question

Recommended Posts

  • 0

Hi all,

 

Now i'm running Armbian on my Banana Pi.
And the LCD is working fine.

I'm using an old Armbian distribution. (Armbian_5.59_Bananapi_Ubuntu_xenial_default_3.4.113_desktop.img)

The /boot/script.bin have been compiled with the fex from the github in the previous post.

I've made some changed to the /boot/armbianEnv.txt :

disp_mode=1024x600p60
monitor=lcd

 

and run : mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr

 

Still investigate to run the latest Armbian release.

Just need to get an new SD card ;-)

 

Regards

Hugues

Link to comment
Share on other sites

Help Armbian team helping you!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...