Jump to content

Helios64 Support


gprovost

Recommended Posts

@aprayoga if you still need it here's a full boot log of the crash (the actual stacktrace of the crash is inconsistent for me)

 

Spoiler

DDR Version 1.24 20191016

In

A: 0x1804

SecureInit read PBA: 0x1c04

SecureInit ret = 0, SecureMode = 0

atags_set_bootdev: ret:(0)

GPT 0x3380ec0 signature is wrong

recovery gpt...

GPT 0x3380ec0 signature is wrong

recovery gpt fail!

LoadTrust Addr:0x4000

No find bl30.bin

No find bl32.bin

Load uboot, ReadLba = 2000

Load OK, addr=0x200000, size=0xdcfd8

RunBL31 0x40000

NOTICE:  BL31: v1.3(debug):42583b6

NOTICE:  BL31: Built : 07:55:13, Oct 15 2019

NOTICE:  BL31: Rockchip release version: v1.1

INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3

INFO:    Using opteed sec cpu_context!

INFO:    boot cpu mask: 0

INFO:    plat_rockchip_pmu_init(1190): pd status 3e

INFO:    BL31: Initializing runtime services

WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK

ERROR:   Error initializing runtime service opteed_fast

INFO:    BL31: Preparing for EL3 exit to normal world

INFO:    Entry point address = 0x200000

INFO:    SPSR = 0x3c9

 

 

U-Boot 2020.07-armbian (Oct 13 2020 - 16:49:59 +0200)

 

SoC: Rockchip rk3399

Reset cause: POR

DRAM:  3.9 GiB

PMIC:  RK808

SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB

MMC:   mmc@fe320000: 1, sdhci@fe330000: 0

Loading Environment from MMC... scanning bus for devices...

Hit any key to stop autoboot:  0

Card did not respond to voltage select!

switch to partitions #0, OK

mmc0(part 0) is current device

Scanning mmc 0:1...

Found U-Boot script /boot/boot.scr

27236864 bytes read in 2646 ms (9.8 MiB/s)

 

Starting kernel ...

 

[   16.291853] systemd[1]: Failed to start Import ZFS pools by cache file.

[   16.768236] systemd[1]: Failed to start Set console font and keymap.

ckchipdrm analogix_dp dw_hdmi dw_mipi_dsi drm_kms_helper cec rc_core drm adc_keys drm_panel_orientation_quirks

[   23.935692] CPU: 4 PID: 0 Comm: swapper/4 Tainted: G         C        5.8.16-rockchip64 #20.08.14

[   23.936474] Hardware name: Helios64 (DT)

[   23.936827] pstate: 80000085 (Nzcv daIf -PAN -UAO BTYPE=--)

[   23.937336] pc : __update_load_avg_se+0x64/0x308

[   23.937751] lr : update_load_avg+0x278/0x5e0

[   23.938131] sp : ffff800011abbd80

[   23.938428] x29: ffff800011abbd80 x28: 0000000000000001

[   23.938901] x27: ffff0000f6ea5700 x26: ffff800011abc000

[   23.939373] x25: ffff8000114f1d20 x24: 0000000000000000

[   23.939846] x23: ffff0000f77a7b40 x22: 0000000000000005

[   23.940317] x21: 000000058fae126f x20: ffff0000f61c80c0

[   23.940789] x19: ffff0000f61c80c0 x18: 0000000000000000

[   23.941261] x17: 0000000000000000 x16: 0000000000000000

[   23.941733] x15: 0000000000000000 x14: 0000000000000000

[   23.942205] x13: 0000000000000332 x12: 0000000000000339

[   23.942676] x11: 0000000000000001 x10: 0000000000000a20

[   23.943148] x9 : ffff800011c53e70 x8 : 0000000000000000

[   23.943620] x7 : 0000000000000000 x6 : 0000000019d0a216

[   23.944092] x5 : 0000000000000000 x4 : 000000000000005e

[   23.944563] x3 : 0000000000000000 x2 : 000000058fae1000

[   23.945034] x1 : ffff0000f77a7bc0 x0 : 000000000000005e

[   23.945508] Call trace:

[   23.945734]  __update_load_avg_se+0x64/0x308

[   23.946118]  update_load_avg+0x278/0x5e0

[   23.946472]  enqueue_entity+0x68/0x228

[   23.946809]  enqueue_task_fair+0x78/0x4d8

[   23.947171]  ttwu_do_activate+0x84/0xe8

[   23.947516]  sched_ttwu_pending+0xc0/0x168

[   23.947884]  flush_smp_call_function_queue+0xec/0x258

[   23.948334]  generic_smp_call_function_single_interrupt+0x14/0x20

[   23.948879]  handle_IPI+0x258/0x3e8

[   23.949195]  gic_handle_irq+0x154/0x158

[   23.949539]  el1_irq+0xb8/0x180

[   23.949824]  arch_cpu_idle+0x28/0x218

[   23.950158]  default_idle_call+0x1c/0x44

[   23.950510]  do_idle+0x210/0x288

[   23.950801]  cpu_startup_entry+0x24/0x68

[   23.951155]  secondary_start_kernel+0x140/0x178

[   23.951564] Code: 2a0403e0 8b030042 f9402023 f9006262 (b9401cc1)

[   23.952116] ---[ end trace fd422e59e1cb21cd ]---

[   23.952527] Kernel panic - not syncing: Fatal exception in interrupt

[   23.953092] SMP: stopping secondary CPUs

[   23.953448] Kernel Offset: disabled

[   23.953763] CPU features: 0x240022,2000600c

[   23.954135] Memory Limit: none

[   23.954422] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

 

Spoiler

channel 0

CS = 0

MR0=0x18

MR4=0x1

MR5=0x1

MR8=0x10

MR12=0x72

MR14=0x72

MR18=0x0

MR19=0x0

MR24=0x8

MR25=0x0

channel 1

CS = 0

MR0=0x18

MR4=0x1

MR5=0x1

MR8=0x10

MR12=0x72

MR14=0x72

MR18=0x0

MR19=0x0

MR24=0x8

MR25=0x0

channel 0 training pass!

channel 1 training pass!

change freq to 416MHz 0,1

Channel 0: LPDDR4,416MHz

Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB

Channel 1: LPDDR4,416MHz

Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB

256B stride

channel 0

CS = 0

MR0=0x18

MR4=0x1

MR5=0x1

MR8=0x10

MR12=0x72

MR14=0x72

MR18=0x0

MR19=0x0

MR24=0x8

MR25=0x0

channel 1

CS = 0

MR0=0x18

MR4=0x1

MR5=0x1

MR8=0x10

MR12=0x72

MR14=0x72

MR18=0x0

MR19=0x0

MR24=0x8

MR25=0x0

channel 0 training pass!

channel 1 training pass!

channel 0, cs 0, advanced training done

channel 1, cs 0, advanced training done

change freq to 856MHz 1,0

ch 0 ddrconfig = 0x101, ddrsize = 0x40

ch 1 ddrconfig = 0x101, ddrsize = 0x40

pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD

ddr_set_rate to 328MHZ

ddr_set_rate to 666MHZ

ddr_set_rate to 928MHZ

channel 0, cs 0, advanced training done

ll return SMC_UNK

ERROR:   Error initializing runtime service opteed_fast

INFO:    BL31: Preparing for EL3 exit to normal world

INFO:    Entry point address = 0x200000

INFO:    SPSR = 0x3c9

 

 

U-Boot 2020.07-armbian (Oct 13 2020 - 16:49:59 +0200)

 

SoC: Rockchip rk3399

Reset cause: POR

DRAM:  3.9 GiB

PMIC:  RK808

eth0: ethernet@fe300000

scanning bus for devices...

Hit any key to stop autoboot:  0

Card did not respond to voltage select!

Scanning mmc 0:1...

Found U-Boot script /boot/boot.scr

3185 bytes read in 18 ms (171.9 KiB/s)

## Executing script at 00500000

Boot script loaded from mmc 0

166 bytes read in 12 ms (12.7 KiB/s)

16311106 bytes read in 1601 ms (9.7 MiB/s)

27236864 bytes read in 2645 ms (9.8 MiB/s)

OK

## Flattened Device Tree blob at 01f00000

   Booting using the fdt blob at 0x1f00000

   Loading Ramdisk to f4f58000, end f5ee6302 ... OK

   Loading Device Tree to 00000000f4edc000, end 00000000f4f57fff ... OK

[   15.396135] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port

[   16.304499] systemd[1]: Failed to start Import ZFS pools by cache file.

[   16.784363] systemd[1]: Failed to start Set console font and keymap.

[   21.126776] kernel BUG at arch/arm64/kernel/traps.c:470!

[   21.127260] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP

[   21.127750] Modules linked in: rfkill governor_performance zstd zram r8152 snd_soc_hdmi_codec leds_pwm gpio_charger pwm_fan snd_soc_rockchip_i2s snd_soc_core snd_pcm_dmaengine panfrost snd_pcm snd_timer snd soundcore gpu_sched sg rockchip_rga hantro_vpu(C) rockchip_vdec(C) videobuf2_dma_sg v4l2_h264 videobuf2_dma_contig videobuf2_vmalloc v4l2_mem2mem videobuf2_memopsx5 : 00000000d5300000 x4 : ffff800011806118

[   21.142542] x3 : 00000000d6500000 x2 : 0000000000000002

[   21.143014] x1 : ffff0000f6ea6580 x0 : 0000000040000085

[   21.143488] Call trace:

[   21.143717]  do_undefinstr+0x2ec/0x310

[   21.144061]  el1_sync_handler+0x88/0x110

[   21.144414]  el1_sync+0x7c/0x100

[   21.144713]  check_preemption_disabled+0x48/0x108

[   21.145143]  irq_exit+0x70/0xe0

[   21.145434]  handle_IPI+0x25c/0x3e8

[   21.145758]  gic_handle_irq+0x154/0x158

[   21.146103]  el1_irq+0xb8/0x180

[   21.146386]  arch_cpu_idle+0x28/0x218

[   21.146721]  default_idle_call+0x1c/0x44

[   21.147082]  do_idle+0x210/0x288

[   21.147373]  cpu_startup_entry+0x28/0x68

[   21.147725]  secondary_start_kernel+0x140/0x178

[   21.148137] Code: f9401bf7 17ffff7d a9025bf5 f9001bf7 (d4210000)

[   21.148691] ---[ end trace 9f0e999f37a83ba9 ]---

[   21.149105] Kernel panic - not syncing: Attempted to kill the idle task!

[   21.149704] SMP: stopping secondary CPUs

[   21.150064] Kernel Offset: disabled

[   21.150378] CPU features: 0x240022,2000600c

[   21.150750] Memory Limit: none

[   21.151036] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---

 

Link to comment
Share on other sites

Sadly buster.13 is still unstable. Got this after a few hours without much load. 

 

[ 8251.657645] ------------[ cut here ]------------
[ 8251.658075] kernel BUG at arch/arm64/kernel/traps.c:470!
[ 8251.658551] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 8251.659038] Modules linked in: iptable_nat iptable_filter bpfilter wireguard libchacha20poly1305 poly1305_neon ip6_udp_tunnel udp_tunnel libblake2s libcurve25519_generic libblake2s_generic veth xt_nat xt_tcpudp xt_conntrack xt_MASQUERADE nf_conntrack_netlink xfrm_user xfrm_algo nft_counter xt_addrtype nft_compat nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink br_netfilter bridge governor_performance zstd zram r8152 snd_soc_hdmi_codec snd_soc_rockchip_i2s leds_pwm snd_soc_core panfrost pwm_fan gpio_charger hantro_vpu(C) gpu_sched snd_pcm_dmaengine snd_pcm rockchip_vdec(C) rockchip_rga v4l2_h264 snd_timer videobuf2_dma_sg videobuf2_dma_contig snd rockchipdrm v4l2_mem2mem dw_mipi_dsi videobuf2_vmalloc videobuf2_memops dw_hdmi videobuf2_v4l2 soundcore analogix_dp videobuf2_common drm_kms_helper cec rc_core videodev fusb30x(C) gpio_beeper mc drm drm_panel_orientation_quirks sg cpufreq_dt lm75 ip_tables x_tables autofs4 raid456 async_raid6_recov async_memcpy
[ 8251.659153]  async_pq async_xor async_tx raid1 multipath linear raid10 raid0 md_mod realtek dwmac_rk stmmac_platform stmmac mdio_xpcs adc_keys
[ 8251.667928] CPU: 4 PID: 0 Comm: swapper/4 Tainted: G         C        5.8.16-rockchip64 #20.08.13
[ 8251.668710] Hardware name: Helios64 (DT)
[ 8251.669062] pstate: 00000085 (nzcv daIf -PAN -UAO BTYPE=--)
[ 8251.669564] pc : do_undefinstr+0x2ec/0x310
[ 8251.669931] lr : do_undefinstr+0x1e0/0x310
[ 8251.670296] sp : ffff800011abbd50
[ 8251.670593] x29: ffff800011abbd50 x28: ffff0000f6ea5700 
[ 8251.671067] x27: ffff0000f6ea5700 x26: ffff800011abc000 
[ 8251.671540] x25: ffff8000114f1d20 x24: 0000000000000000 
[ 8251.672012] x23: 0000000040000085 x22: ffff800010df6d90 
[ 8251.672484] x21: ffff800011abbf00 x20: ffff0000f6ea5700 
[ 8251.672956] x19: ffff800011abbdc0 x18: 0000000000000000 
[ 8251.673428] x17: 0000000000000000 x16: 0000000000000000 
[ 8251.673900] x15: 0000000000000006 x14: 00000d554264da40 
[ 8251.674372] x13: 0000000000000322 x12: 000000000000036f 
[ 8251.674844] x11: 0000000000000001 x10: 0000000000000004 
[ 8251.675316] x9 : ffff0000f77a8590 x8 : ffff0000f77a7bc0 
[ 8251.675788] x7 : ffff0000f6211dc0 x6 : ffff800011abbda8 
[ 8251.676260] x5 : 00000000d5300000 x4 : ffff800011806118 
[ 8251.676731] x3 : 0000000034000000 x2 : 0000000000000002 
[ 8251.677203] x1 : ffff0000f6ea5700 x0 : 0000000040000085 
[ 8251.677676] Call trace:
[ 8251.677900]  do_undefinstr+0x2ec/0x310
[ 8251.678240]  el1_sync_handler+0x88/0x110
[ 8251.678591]  el1_sync+0x7c/0x100
[ 8251.678886]  check_preemption_disabled+0x30/0x108
[ 8251.679305]  __this_cpu_preempt_check+0x1c/0x34
[ 8251.679710]  irq_exit+0x70/0xe0
[ 8251.679996]  handle_IPI+0x25c/0x3e8
[ 8251.680312]  gic_handle_irq+0x154/0x158
[ 8251.680655]  el1_irq+0xb8/0x180
[ 8251.680938]  arch_cpu_idle+0x28/0x218
[ 8251.681269]  default_idle_call+0x1c/0x44
[ 8251.681622]  do_idle+0x210/0x288
[ 8251.681912]  cpu_startup_entry+0x28/0x68
[ 8251.682265]  secondary_start_kernel+0x140/0x178
[ 8251.682673] Code: f9401bf7 17ffff7d a9025bf5 f9001bf7 (d4210000) 
[ 8251.683223] ---[ end trace 47af1c5026823974 ]---
[ 8251.683636] Kernel panic - not syncing: Attempted to kill the idle task!
[ 8251.684232] SMP: stopping secondary CPUs
[ 8251.684588] Kernel Offset: disabled
[ 8251.684903] CPU features: 0x240022,2000600c
[ 8251.685275] Memory Limit: none
[ 8251.685562] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---

Link to comment
Share on other sites

6 hours ago, jbergler said:

If you, like myself, installed on eMMC and are experiencing the crashes on 20.08.14 - I booted up via a 20.08.10 sdcard and fixed the environment on emmc

 

 

@aprayoga It's probably unrelated, but while working through the above I noticed that I ran out of space on /boot.

I installed to eMMC the first version that was working, if that helps. I chose f2fs when I installed on eMMAC and this is the resulting partition layout


mmcblk1      179:32   0 14.6G  0 disk 
├─mmcblk1p1  179:33   0   96M  0 part
└─mmcblk1p2  179:34   0 14.3G  0 part
mmcblk1boot0 179:64   0    4M  1 disk 
mmcblk1boot1 179:96   0    4M  1 disk

Sadly I didn't grab enough info from what was in the boot partition before I nuked it and reinstalled the appropriate packages.

 

 

I choose ext4 resulting in this :

mmcblk1      179:32   0  14.6G  0 disk  
└─mmcblk1p1  179:33   0  14.4G  0 part  
mmcblk1boot0 179:64   0     4M  1 disk  
mmcblk1boot1 179:96   0     4M  1 disk  

 

Link to comment
Share on other sites

i got this kernel exception while running iperf3 speed tests. helios64 did not crash though (i did a clean reboot)

cpu load is at 100% while sending or receiving (this is expected because of no tx offloading)

 

i have seen some connection drops with very long living connections (mutliple hours) maybe thats related.

 

one additional want to have: as i am not at home over weekends i'd love to see a feature that helios64 would auto restart on crash. i see the red led blinking.

that way my wireguard/pihole would continue working

 

[12403.586397] Hardware name: Helios64 (DT)
[12403.586763] pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--)
[12403.587273] pc : dev_watchdog+0x39c/0x3a8
[12403.587646] lr : dev_watchdog+0x39c/0x3a8
[12403.588014] sp : ffff800011abbd30
[12403.588321] x29: ffff800011abbd30 x28: ffff0000e7543e80 
[12403.588808] x27: 0000000000000004 x26: 0000000000000140 
[12403.589296] x25: 00000000ffffffff x24: 0000000000000002 
[12403.589783] x23: ffff0000e6d703dc x22: ffff0000e6d70000 
[12403.590270] x21: ffff0000e6d70480 x20: ffff800011807000 
[12403.590757] x19: 0000000000000000 x18: 0000000000000000 
[12403.591244] x17: 0000000000000000 x16: 0000000000000000 
[12403.591730] x15: ffff80001182e000 x14: ffff800011a10242 
[12403.592217] x13: 0000000000000000 x12: ffff800011a0f000 
[12403.592705] x11: ffff80001182e000 x10: ffff800011a0f888 
[12403.593192] x9 : 0000000000000000 x8 : 0000000000000006 
[12403.593679] x7 : 0000000000000364 x6 : 0000000000000003 
[12403.594166] x5 : 0000000000000000 x4 : 0000000000000000 
[12403.594652] x3 : 0000000000000100 x2 : 0000000000000103 
[12403.595138] x1 : b97470e46a7cb200 x0 : 0000000000000000 
[12403.595626] Call trace:
[12403.595861]  dev_watchdog+0x39c/0x3a8
[12403.596206]  call_timer_fn+0x30/0x1e0
[12403.596548]  run_timer_softirq+0x1e0/0x5b0
[12403.596930]  efi_header_end+0x16c/0x400
[12403.597287]  irq_exit+0xc8/0xe0
[12403.597583]  __handle_domain_irq+0x98/0x108
[12403.597971]  gic_handle_irq+0x60/0x158
[12403.598319]  el1_irq+0xb8/0x180
[12403.598615]  arch_cpu_idle+0x28/0x218
[12403.598961]  default_idle_call+0x1c/0x44
[12403.599326]  do_idle+0x210/0x288
[12403.599629]  cpu_startup_entry+0x24/0x68
[12403.599995]  secondary_start_kernel+0x140/0x178
[12403.600410] ---[ end trace ad1687ba894eaefe ]---
[12403.600896] r8152 2-1.4:1.0 eth1: Tx timeout
[12403.604757] xhci-hcd xhci-hcd.0.auto: bad transfer trb length 16754908 in event trb
[12403.605617] r8152 2-1.4:1.0 eth1: Tx status -2
[12403.606197] xhci-hcd xhci-hcd.0.auto: bad transfer trb length 16754908 in event trb
[12403.606964] r8152 2-1.4:1.0 eth1: Tx status -2
[12403.607640] r8152 2-1.4:1.0 eth1: Tx status -2
[12403.608300] r8152 2-1.4:1.0 eth1: Tx status -2

 

Link to comment
Share on other sites

@flower On which kernel are you running ? Did you revert to LK 5.8.14 ?

 

12 hours ago, flower said:

one additional want to have: as i am not at home over weekends i'd love to see a feature that helios64 would auto restart on crash. i see the red led blinking.

that way my wireguard/pihole would continue working

 

You can use watchdog service for that.

Link to comment
Share on other sites

Sadly, 20.03.13 / 5.8.16 completely broke my system. This is the error I see over serial:

### ERROR ### Please RESET the board ###

Here's the full output:

Spoiler

DDR Version 1.24 20191016
In
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
256B stride
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x40
ch 1 ddrconfig = 0x101, ddrsize = 0x40
pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD
ddr_set_rate to 328MHZ
ddr_set_rate to 666MHZ
ddr_set_rate to 928MHZ
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
ddr_set_rate to 416MHZ, ctl_index 0
ddr_set_rate to 856MHZ, ctl_index 1
support 416 856 328 666 928 MHz, current 856MHz
OUT
Boot1: 2019-03-14, version: 1.19
CPUId = 0x0
ChipType = 0x10, 253
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=30436MB
FwPartOffset=2000 , 0
StorageInit ok = 79105
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT 0x3380ec0 signature is wrong
recovery gpt...
GPT 0x3380ec0 signature is wrong
recovery gpt fail!
LoadTrust Addr:0x4000
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xded90
RunBL31 0x40000
NOTICE:  BL31: v1.3(debug):42583b6
NOTICE:  BL31: Built : 07:55:13, Oct 15 2019
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1190): pd status 3e
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2020.07-armbian (Oct 05 2020 - 15:57:22 +0200)

SoC: Rockchip rk3399
Reset cause: POR
DRAM:  3.9 GiB
PMIC:  RK808
SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
MMC:   mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from MMC... mmc fail to send stop cmd
*** Warning - !read failed, using default environment

In:    serial
Out:   serial
Err:   serial
Model: Helios64
Revision: 1.2 - 4GB non ECC
Net:   eth0: ethernet@fe300000
scanning bus for devices...
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
3185 bytes read in 6 ms (517.6 KiB/s)
## Executing script at 00500000
Boot script loaded from mmc 1
166 bytes read in 5 ms (32.2 KiB/s)
16005149 bytes read in 682 ms (22.4 MiB/s)
27236864 bytes read in 1155 ms (22.5 MiB/s)
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
## Loading init Ramdisk from Legacy Image at 06000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    16005085 Bytes = 15.3 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
ERROR: Did not find a cmdline Flattened Device Tree
   Loading Ramdisk to f4fa1000, end f5ee47dd ... OK
FDT and ATAGS support not compiled in - hanging
### ERROR ### Please RESET the board ###

 

 

Link to comment
Share on other sites

2 hours ago, barnumbirr said:

Sadly, 20.03.13 / 5.8.16 completely broke my system.

 

You could try to boot from SD: although the boot order officially is SPI, EMMC, SD - Helios64 seems to boot from an inserted SD card although there is a bootable system installed on emmc.

 

btw: I have downgraded to kernel 5.8.14.

Link to comment
Share on other sites

1 minute ago, ebin-dev said:

 

You could try to boot from SD: although the boot order officially is SPI, EMMC, SD - Helios64 boots from an inserted SD card although there is a bootable system installed on emmc (at least mine).

btw: I have downgraded to kernel 5.8.14.

I've been booting from the SD ever since I setup my Helios64. From the logs, it seems I'm missing the .dtb file so I'll try and get my hand on it.

Link to comment
Share on other sites

44 minutes ago, barnumbirr said:

I've been booting from the SD ever since I setup my Helios64. From the logs, it seems I'm missing the .dtb file so I'll try and get my hand on it.

If you can mount the SD with some ext4 capable system...

Add the following stanza to boot/armbianEnv.txt in the mounted volume and you should be good to go.

fdtfile=rockchip/rk3399-kobol-helios64.dtb

There was a device tree file rename in the meantime and your u-boot does not know that :(

Link to comment
Share on other sites

1 hour ago, piter75 said:

If you can mount the SD with some ext4 capable system...

Add the following stanza to boot/armbianEnv.txt in the mounted volume and you should be good to go.



fdtfile=rockchip/rk3399-kobol-helios64.dtb

There was a device tree file rename in the meantime and your u-boot does not know that :(

Managed to boot again. Adding

fdtfile=rockchip/rk3399-kobol-helios64.dtb

 

to boot/armbianEnv.txt wasn't enough as for some reason the dtb-5.8.16-rockchip64 directory in /boot had vanished from my system. I've still got some issues as fancontrol fails with the following error:

 

Spoiler


Oct 22 15:16:29 helios64 fancontrol[1184]: Error: file /dev/fan-p6/pwm1 doesn't exist
Oct 22 15:16:29 helios64 fancontrol[1184]: Error: file /dev/fan-p7/pwm1 doesn't exist

 

The system gets quite hot as a result, for now I've temporarely hard coded some values in /sys/class/hwmon/hwmon*/pwm1.
I also get the following logs in the serial console:

 

Spoiler


Starting kernel ...

[   65.817320] Internal error: Oops: 86000004 [#1] PREEMPT SMP
[   65.817825] Modules linked in: snd_soc_hdmi_codec hantro_vpu(C) rockchip_vdec(C) rockchipdrm rockchip_rga snd_soc_rockchip_i2s v4l2_h264 videobuf2_dma_contig dw_mipi_dsi snd_soc_core dw_hdmi v4l2_mem2mem videobuf2_vmalloc videobuf2_dma_sg snd_pcm_dmaengine r8152 analogix_dp snd_pcm videobuf2_memops videobuf2_v4l2 drm_kms_helper panfrost snd_timer videobuf2_common cec videodev snd rc_core gpu_sched sg drm mc gpio_charger soundcore leds_pwm fusb30x(C) pwm_fan drm_panel_orientation_quirks gpio_beeper cpufreq_dt nfsd auth_rpcgss nfs_acl dm_mod lockd grace sunrpc lm75 ip_tables x_tables autofs4 raid10 raid1 raid0 multipath linear raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx realtek md_mod dwmac_rk stmmac_platform stmmac mdio_xpcs adc_keys
[   65.823764] CPU: 4 PID: 534 Comm: kworker/4:3 Tainted: G         C        5.8.16-rockchip64 #20.08.14
[   65.824577] Hardware name: Helios64 (DT)
[   65.824943] Workqueue: events dbs_work_handler
[   65.825343] pstate: 80000085 (Nzcv daIf -PAN -UAO BTYPE=--)
[   65.825839] pc : 0x800010010320
[   65.826128] lr : return_address+0x58/0x90
[   65.826485] sp : ffff800012663500
[   65.826782] x29: ffff800012663530 x28: 00000000000000fa
[   65.827255] x27: ffff0000f5a66cf8 x26: ffff0000e4f85700
[   65.827728] x25: ffff8000119cf3a8 x24: 0000000001000001
[   65.828200] x23: ffff0000f5a66cf0 x22: ffff800012663728
[   65.828672] x21: ffff0000f5a66cf8 x20: ffff800010dff2d0
[   65.829144] x19: ffff0000e4f85700 x18: 0000000000000000
[   65.829616] x17: 0000000000000000 x16: 0000000000000000
[   65.830087] x15: 0000000000000000 x14: 0000000000000000
[   65.830559] x13: 00000000000002c4 x12: 00000000000002cd
[   65.831030] x11: 0000000000000001 x10: 0000000000000a20
[   65.831502] x9 : ffff800012663460 x8 : ffff0000e4f86180
[   65.831974] x7 : 0000000000000001 x6 : 0000000000000001
[   65.832446] x5 : 0000000000000002 x4 : fff6800010014610
[   65.832917] x3 : ffff800012663520 x2 : fff68000100145d8
[   65.833395] x1 : ffff800010dff640 x0 : ffff0000e4f85700
[   65.833873] Call trace:
[   65.834097]  0x800010010320
[   65.834350]  return_address+0x0/0x90
[   65.834676] Code: bad PC value
[   65.834953] ---[ end trace de998757a1cc1983 ]---
[   65.835366] note: kworker/4:3[534] exited with preempt_count 1
[  712.382286] Unable to handle kernel paging request at virtual address 0001000000000027
[  712.383017] Mem abort info:
[  712.383278]   ESR = 0x96000004
[  712.383563]   EC = 0x25: DABT (current EL), IL = 32 bits
[  712.384045]   SET = 0, FnV = 0
[  712.384328]   EA = 0, S1PTW = 0
[  712.384617] Data abort info:
[  712.384884]   ISV = 0, ISS = 0x00000004
[  712.385235]   CM = 0, WnR = 0
[  712.385511] [0001000000000027] address between user and kernel address ranges
[  712.386158] Internal error: Oops: 96000004 [#2] PREEMPT SMP
[  712.386664] Modules linked in: snd_soc_hdmi_codec hantro_vpu(C) rockchip_vdec(C) rockchipdrm rockchip_rga snd_soc_rockchip_i2s v4l2_h264 videobuf2_dma_contig dw_mipi_dsi snd_soc_core dw_hdmi v4l2_mem2mem videobuf2_vmalloc videobuf2_dma_sg snd_pcm_dmaengine r8152 analogix_dp snd_pcm videobuf2_memops videobuf2_v4l2 drm_kms_helper panfrost snd_timer videobuf2_common cec videodev snd rc_core gpu_sched sg drm mc gpio_charger soundcore leds_pwm fusb30x(C) pwm_fan drm_panel_orientation_quirks gpio_beeper cpufreq_dt nfsd auth_rpcgss nfs_acl dm_mod lockd grace sunrpc lm75 ip_tables x_tables autofs4 raid10 raid1 raid0 multipath linear raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx realtek md_mod dwmac_rk stmmac_platform stmmac mdio_xpcs adc_keys
[  712.392782] CPU: 1 PID: 1051 Comm: kworker/1:3 Tainted: G      D  C        5.8.16-rockchip64 #20.08.14
[  712.393618] Hardware name: Helios64 (DT)
[  712.393998] Workqueue: events_power_efficient sync_hw_clock
[  712.394511] pstate: 20000085 (nzCv daIf -PAN -UAO BTYPE=--)
[  712.395023] pc : rt_mutex_enqueue_pi+0x58/0xc8
[  712.395433] lr : task_blocks_on_rt_mutex+0x1d4/0x258
[  712.395884] sp : ffff800012a238d0
[  712.396190] x29: ffff800012a238d0 x28: 0000000000000001
[  712.396677] x27: 0000000000000001 x26: ffff0000e4f85e34
[  712.397163] x25: ffff0000e4f85700 x24: 0000000000000000
[  712.397649] x23: ffff0000f6106580 x22: ffff800012a239a8
[  712.398135] x21: ffff800012a239c0 x20: ffff800012a239a8
[  712.398622] x19: ffff0000f5a668a8 x18: 0000000000000000
[  712.399107] x17: 0000000000000000 x16: 0000000000000000
[  712.399593] x15: 0000000000000000 x14: 0000000000000000
[  712.400079] x13: 0000000000000078 x12: 0000000000000124
[  712.400564] x11: 0000000000000064 x10: 0000000000000014
[  712.401051] x9 : ffff800010f6cf48 x8 : ffff0000e4f85700
[  712.401537] x7 : ffff800012a239a8 x6 : 0000000000000000
[  712.402022] x5 : 0000000000000078 x4 : 0001000000000007
[  712.402508] x3 : 0000ffffffffffff x2 : 0000ffffffffffff
[  712.402994] x1 : ffff0000e4f85e40 x0 : ffff800012a239c0
[  712.403480] Call trace:
[  712.403713]  rt_mutex_enqueue_pi+0x58/0xc8
[  712.404092]  task_blocks_on_rt_mutex+0x1d4/0x258
[  712.404521]  rt_mutex_slowlock+0x94/0x198
[  712.404893]  rt_mutex_lock+0x5c/0x68
[  712.405231]  i2c_adapter_lock_bus+0x14/0x20
[  712.405616]  i2c_transfer+0x50/0x128
[  712.405948]  i2c_transfer_buffer_flags+0x5c/0x88
[  712.406374]  regmap_i2c_write+0x20/0x58
[  712.406731]  _regmap_raw_write_impl+0x6f8/0x8c0
[  712.407149]  _regmap_bus_raw_write+0x68/0x88
[  712.407543]  _regmap_write+0x6c/0x160
[  712.407884]  _regmap_update_bits+0xf8/0x110
[  712.408271]  regmap_update_bits_base+0x64/0x98
[  712.408682]  rk808_rtc_set_time+0xc4/0x1a8
[  712.409061]  rtc_set_time+0x88/0x200
[  712.409396]  rtc_set_ntp_time+0x110/0x130
[  712.409769]  sync_hw_clock+0x90/0x150
[  712.410112]  process_one_work+0x1c4/0x470
[  712.410485]  worker_thread+0x4c/0x420
[  712.410826]  kthread+0x118/0x150
[  712.411130]  ret_from_fork+0x10/0x34
[  712.411468] Code: 52800006 b4000123 aa0303e2 91002044 (b9402843)
[  712.412023] ---[ end trace de998757a1cc1984 ]---
[  712.412448] note: kworker/1:3[1051] exited with preempt_count 2

 

Does anyone have an idea how to fix this?

EDIT: I've also attached the console log files from boot:

 

Spoiler

DDR Version 1.24 20191016
In
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
256B stride
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x40
ch 1 ddrconfig = 0x101, ddrsize = 0x40
pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD
ddr_set_rate to 328MHZ
ddr_set_rate to 666MHZ
ddr_set_rate to 928MHZ
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
ddr_set_rate to 416MHZ, ctl_index 0
ddr_set_rate to 856MHZ, ctl_index 1
support 416 856 328 666 928 MHz, current 856MHz
OUT
Boot1: 2019-03-14, version: 1.19
CPUId = 0x0
ChipType = 0x10, 254
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=30436MB
FwPartOffset=2000 , 0
StorageInit ok = 79625
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT 0x3380ec0 signature is wrong
recovery gpt...
GPT 0x3380ec0 signature is wrong
recovery gpt fail!
LoadTrust Addr:0x4000
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xded90
RunBL31 0x40000
NOTICE:  BL31: v1.3(debug):42583b6
NOTICE:  BL31: Built : 07:55:13, Oct 15 2019
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1190): pd status 3e
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2020.07-armbian (Oct 05 2020 - 15:57:22 +0200)

SoC: Rockchip rk3399
Reset cause: POR
DRAM:  3.9 GiB
PMIC:  RK808
SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
MMC:   mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from MMC... mmc fail to send stop cmd
*** Warning - !read failed, using default environment

In:    serial
Out:   serial
Err:   serial
Model: Helios64
Revision: 1.2 - 4GB non ECC
Net:   eth0: ethernet@fe300000
scanning bus for devices...
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
3185 bytes read in 6 ms (517.6 KiB/s)
## Executing script at 00500000
Boot script loaded from mmc 1
208 bytes read in 5 ms (40 KiB/s)
16005149 bytes read in 682 ms (22.4 MiB/s)
27236864 bytes read in 1155 ms (22.5 MiB/s)
79946 bytes read in 13 ms (5.9 MiB/s)
2698 bytes read in 12 ms (218.8 KiB/s)
Applying kernel provided DT fixup script (rockchip-fixup.scr)
## Executing script at 09000000
## Loading init Ramdisk from Legacy Image at 06000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    16005085 Bytes = 15.3 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Ramdisk to f4fa1000, end f5ee47dd ... OK
   Loading Device Tree to 00000000f4f25000, end 00000000f4fa0fff ... OK

Starting kernel ...

 

 

Edited by barnumbirr
Added more info for context
Link to comment
Share on other sites

17 minutes ago, barnumbirr said:

fdtfile=rockchip/rk3399-kobol-helios64.dtb

Managed to boot again. Adding

 

to boot/armbianEnv.txt wasn't enough as for some reason the dtb-5.8.16-rockchip64 directory in /boot had vanished from my system. I've still got some issues as fancontrol fails with the following error:

 

  Hide contents


Oct 22 15:16:29 helios64 fancontrol[1184]: Error: file /dev/fan-p6/pwm1 doesn't exist
Oct 22 15:16:29 helios64 fancontrol[1184]: Error: file /dev/fan-p7/pwm1 doesn't exist

 

The system gets quite hot as a result, for now I've temporarely hard coded some values in /sys/class/hwmon/hwmon*/pwm1.
I also get the following logs in the serial console:

 

  Reveal hidden contents


Starting kernel ...

[   65.817320] Internal error: Oops: 86000004 [#1] PREEMPT SMP
[   65.817825] Modules linked in: snd_soc_hdmi_codec hantro_vpu(C) rockchip_vdec(C) rockchipdrm rockchip_rga snd_soc_rockchip_i2s v4l2_h264 videobuf2_dma_contig dw_mipi_dsi snd_soc_core dw_hdmi v4l2_mem2mem videobuf2_vmalloc videobuf2_dma_sg snd_pcm_dmaengine r8152 analogix_dp snd_pcm videobuf2_memops videobuf2_v4l2 drm_kms_helper panfrost snd_timer videobuf2_common cec videodev snd rc_core gpu_sched sg drm mc gpio_charger soundcore leds_pwm fusb30x(C) pwm_fan drm_panel_orientation_quirks gpio_beeper cpufreq_dt nfsd auth_rpcgss nfs_acl dm_mod lockd grace sunrpc lm75 ip_tables x_tables autofs4 raid10 raid1 raid0 multipath linear raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx realtek md_mod dwmac_rk stmmac_platform stmmac mdio_xpcs adc_keys
[   65.823764] CPU: 4 PID: 534 Comm: kworker/4:3 Tainted: G         C        5.8.16-rockchip64 #20.08.14
[   65.824577] Hardware name: Helios64 (DT)
[   65.824943] Workqueue: events dbs_work_handler
[   65.825343] pstate: 80000085 (Nzcv daIf -PAN -UAO BTYPE=--)
[   65.825839] pc : 0x800010010320
[   65.826128] lr : return_address+0x58/0x90
[   65.826485] sp : ffff800012663500
[   65.826782] x29: ffff800012663530 x28: 00000000000000fa
[   65.827255] x27: ffff0000f5a66cf8 x26: ffff0000e4f85700
[   65.827728] x25: ffff8000119cf3a8 x24: 0000000001000001
[   65.828200] x23: ffff0000f5a66cf0 x22: ffff800012663728
[   65.828672] x21: ffff0000f5a66cf8 x20: ffff800010dff2d0
[   65.829144] x19: ffff0000e4f85700 x18: 0000000000000000
[   65.829616] x17: 0000000000000000 x16: 0000000000000000
[   65.830087] x15: 0000000000000000 x14: 0000000000000000
[   65.830559] x13: 00000000000002c4 x12: 00000000000002cd
[   65.831030] x11: 0000000000000001 x10: 0000000000000a20
[   65.831502] x9 : ffff800012663460 x8 : ffff0000e4f86180
[   65.831974] x7 : 0000000000000001 x6 : 0000000000000001
[   65.832446] x5 : 0000000000000002 x4 : fff6800010014610
[   65.832917] x3 : ffff800012663520 x2 : fff68000100145d8
[   65.833395] x1 : ffff800010dff640 x0 : ffff0000e4f85700
[   65.833873] Call trace:
[   65.834097]  0x800010010320
[   65.834350]  return_address+0x0/0x90
[   65.834676] Code: bad PC value
[   65.834953] ---[ end trace de998757a1cc1983 ]---
[   65.835366] note: kworker/4:3[534] exited with preempt_count 1
[  712.382286] Unable to handle kernel paging request at virtual address 0001000000000027
[  712.383017] Mem abort info:
[  712.383278]   ESR = 0x96000004
[  712.383563]   EC = 0x25: DABT (current EL), IL = 32 bits
[  712.384045]   SET = 0, FnV = 0
[  712.384328]   EA = 0, S1PTW = 0
[  712.384617] Data abort info:
[  712.384884]   ISV = 0, ISS = 0x00000004
[  712.385235]   CM = 0, WnR = 0
[  712.385511] [0001000000000027] address between user and kernel address ranges
[  712.386158] Internal error: Oops: 96000004 [#2] PREEMPT SMP
[  712.386664] Modules linked in: snd_soc_hdmi_codec hantro_vpu(C) rockchip_vdec(C) rockchipdrm rockchip_rga snd_soc_rockchip_i2s v4l2_h264 videobuf2_dma_contig dw_mipi_dsi snd_soc_core dw_hdmi v4l2_mem2mem videobuf2_vmalloc videobuf2_dma_sg snd_pcm_dmaengine r8152 analogix_dp snd_pcm videobuf2_memops videobuf2_v4l2 drm_kms_helper panfrost snd_timer videobuf2_common cec videodev snd rc_core gpu_sched sg drm mc gpio_charger soundcore leds_pwm fusb30x(C) pwm_fan drm_panel_orientation_quirks gpio_beeper cpufreq_dt nfsd auth_rpcgss nfs_acl dm_mod lockd grace sunrpc lm75 ip_tables x_tables autofs4 raid10 raid1 raid0 multipath linear raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx realtek md_mod dwmac_rk stmmac_platform stmmac mdio_xpcs adc_keys
[  712.392782] CPU: 1 PID: 1051 Comm: kworker/1:3 Tainted: G      D  C        5.8.16-rockchip64 #20.08.14
[  712.393618] Hardware name: Helios64 (DT)
[  712.393998] Workqueue: events_power_efficient sync_hw_clock
[  712.394511] pstate: 20000085 (nzCv daIf -PAN -UAO BTYPE=--)
[  712.395023] pc : rt_mutex_enqueue_pi+0x58/0xc8
[  712.395433] lr : task_blocks_on_rt_mutex+0x1d4/0x258
[  712.395884] sp : ffff800012a238d0
[  712.396190] x29: ffff800012a238d0 x28: 0000000000000001
[  712.396677] x27: 0000000000000001 x26: ffff0000e4f85e34
[  712.397163] x25: ffff0000e4f85700 x24: 0000000000000000
[  712.397649] x23: ffff0000f6106580 x22: ffff800012a239a8
[  712.398135] x21: ffff800012a239c0 x20: ffff800012a239a8
[  712.398622] x19: ffff0000f5a668a8 x18: 0000000000000000
[  712.399107] x17: 0000000000000000 x16: 0000000000000000
[  712.399593] x15: 0000000000000000 x14: 0000000000000000
[  712.400079] x13: 0000000000000078 x12: 0000000000000124
[  712.400564] x11: 0000000000000064 x10: 0000000000000014
[  712.401051] x9 : ffff800010f6cf48 x8 : ffff0000e4f85700
[  712.401537] x7 : ffff800012a239a8 x6 : 0000000000000000
[  712.402022] x5 : 0000000000000078 x4 : 0001000000000007
[  712.402508] x3 : 0000ffffffffffff x2 : 0000ffffffffffff
[  712.402994] x1 : ffff0000e4f85e40 x0 : ffff800012a239c0
[  712.403480] Call trace:
[  712.403713]  rt_mutex_enqueue_pi+0x58/0xc8
[  712.404092]  task_blocks_on_rt_mutex+0x1d4/0x258
[  712.404521]  rt_mutex_slowlock+0x94/0x198
[  712.404893]  rt_mutex_lock+0x5c/0x68
[  712.405231]  i2c_adapter_lock_bus+0x14/0x20
[  712.405616]  i2c_transfer+0x50/0x128
[  712.405948]  i2c_transfer_buffer_flags+0x5c/0x88
[  712.406374]  regmap_i2c_write+0x20/0x58
[  712.406731]  _regmap_raw_write_impl+0x6f8/0x8c0
[  712.407149]  _regmap_bus_raw_write+0x68/0x88
[  712.407543]  _regmap_write+0x6c/0x160
[  712.407884]  _regmap_update_bits+0xf8/0x110
[  712.408271]  regmap_update_bits_base+0x64/0x98
[  712.408682]  rk808_rtc_set_time+0xc4/0x1a8
[  712.409061]  rtc_set_time+0x88/0x200
[  712.409396]  rtc_set_ntp_time+0x110/0x130
[  712.409769]  sync_hw_clock+0x90/0x150
[  712.410112]  process_one_work+0x1c4/0x470
[  712.410485]  worker_thread+0x4c/0x420
[  712.410826]  kthread+0x118/0x150
[  712.411130]  ret_from_fork+0x10/0x34
[  712.411468] Code: 52800006 b4000123 aa0303e2 91002044 (b9402843)
[  712.412023] ---[ end trace de998757a1cc1984 ]---
[  712.412448] note: kworker/1:3[1051] exited with preempt_count 2

 

Does anyone have an idea how to fix this?

 

The /dev/fan* entries should be created by the included udev rules.  In particular:

 

cat 90-helios64-hwmon.rules


# Helios64 persistent hwmon

ACTION=="remove", GOTO="helios64_hwmon_end"

#
KERNELS=="p6-fan", SUBSYSTEMS=="platform", ENV{_HELIOS64_FAN_}="p6", ENV{_IS_HELIOS64_FAN_}="1", ENV{IS_HELIOS64_HWMON}="1"
KERNELS=="p7-fan", SUBSYSTEMS=="platform", ENV{_HELIOS64_FAN_}="p7", ENV{_IS_HELIOS64_FAN_}="1", ENV{IS_HELIOS64_HWMON}="1"
KERNELS=="2-004c", SUBSYSTEMS=="i2c", DRIVERS=="lm75", ENV{IS_HELIOS64_HWMON}="1"

SUBSYSTEM!="hwmon", GOTO="helios64_hwmon_end"

ENV{HWMON_PATH}="/sys%p"
#
ATTR{name}=="cpu", ENV{IS_HELIOS64_HWMON}="1", ENV{HELIOS64_SYMLINK}="/dev/thermal-cpu"
#
ENV{IS_HELIOS64_HWMON}=="1", ATTR{name}=="lm75", ENV{HELIOS64_SYMLINK}="/dev/thermal-board"
ENV{_IS_HELIOS64_FAN_}=="1", ENV{HELIOS64_SYMLINK}="/dev/fan-$env{_HELIOS64_FAN_}"

#
ENV{IS_HELIOS64_HWMON}=="1", RUN+="/bin/ln -sf $env{HWMON_PATH} $env{HELIOS64_SYMLINK}"

LABEL="helios64_hwmon_end"
 

Link to comment
Share on other sites

22 minutes ago, tekrantz said:

 

The /dev/fan* entries should be created by the included udev rules.  In particular:

 



cat 90-helios64-hwmon.rules


# Helios64 persistent hwmon

ACTION=="remove", GOTO="helios64_hwmon_end"

#
KERNELS=="p6-fan", SUBSYSTEMS=="platform", ENV{_HELIOS64_FAN_}="p6", ENV{_IS_HELIOS64_FAN_}="1", ENV{IS_HELIOS64_HWMON}="1"
KERNELS=="p7-fan", SUBSYSTEMS=="platform", ENV{_HELIOS64_FAN_}="p7", ENV{_IS_HELIOS64_FAN_}="1", ENV{IS_HELIOS64_HWMON}="1"
KERNELS=="2-004c", SUBSYSTEMS=="i2c", DRIVERS=="lm75", ENV{IS_HELIOS64_HWMON}="1"

SUBSYSTEM!="hwmon", GOTO="helios64_hwmon_end"

ENV{HWMON_PATH}="/sys%p"
#
ATTR{name}=="cpu", ENV{IS_HELIOS64_HWMON}="1", ENV{HELIOS64_SYMLINK}="/dev/thermal-cpu"
#
ENV{IS_HELIOS64_HWMON}=="1", ATTR{name}=="lm75", ENV{HELIOS64_SYMLINK}="/dev/thermal-board"
ENV{_IS_HELIOS64_FAN_}=="1", ENV{HELIOS64_SYMLINK}="/dev/fan-$env{_HELIOS64_FAN_}"

#
ENV{IS_HELIOS64_HWMON}=="1", RUN+="/bin/ln -sf $env{HWMON_PATH} $env{HELIOS64_SYMLINK}"

LABEL="helios64_hwmon_end"

 

 Ouch, this is what I currently have:

root@helios64:~# ls -la /etc/udev/rules.d/
total 32
drwxr-xr-x 2 root root 4096 Oct 21 15:43 .
drwxr-xr-x 4 root root 4096 Aug 30 20:58 ..
-rw-r--r-- 1 root root 8821 Sep 14 18:07 99-openmediavault-dev-disk-by-id.rules
-rw-r--r-- 1 root root 1348 Jan  7  2020 99-openmediavault-md-raid.rules
-rw-r--r-- 1 root root 1647 Jan  7  2020 99-openmediavault-nonrot.rules
-rw-r--r-- 1 root root 1378 Jan  7  2020 99-openmediavault-scheduler.rules


I can't downgrade using armbian-config because it exists as soon as I confirm I'm okay with the "risk". Is there a way for me to downgrade using apt? ( don't know the list op packages that need to be specified).
If a downgrade isn't possible, can I reconfigure the ones currently installed? (again, don't know the package list)

EDIT: after about 30 minutes, my Helios now reboots on it's own because of Kernel panic with the following logs:

Spoiler

 1849.330507] Unable to handle kernel paging request at virtual address ffff8000141a4100
[ 1849.331220] Mem abort info:
[ 1849.331473]   ESR = 0x96000007
[ 1849.331803]   EC = 0x25: DABT (current EL), IL = 32 bits
[ 1849.332276]   SET = 0, FnV = 0
[ 1849.332551]   EA = 0, S1PTW = 0
[ 1849.332834] Data abort info:
[ 1849.333094]   ISV = 0, ISS = 0x00000007
[ 1849.333436]   CM = 0, WnR = 0
[ 1849.333705] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000035dc000
[ 1849.334298] [ffff8000141a4100] pgd=00000000f7fff003, p4d=00000000f7fff003, pud=00000000f7ffe003, pmd=000000003ba6c003, pte=0000000000000000
[ 1849.335409] Internal error: Oops: 96000007 [#4] PREEMPT SMP
[ 1849.335904] Modules linked in: snd_soc_hdmi_codec hantro_vpu(C) rockchip_vdec(C) snd_soc_rockchip_i2s rockchip_rga rockchipdrm v4l2_h264 snd_soc_core videobuf2_dma_contig dw_mipi_dsi videobuf2_vmalloc videobuf2_dma_sg v4l2_mem2mem snd_pcm_dmaengine dw_hdmi snd_pcm videobuf2_memops videobuf2_v4l2 r8152 analogix_dp snd_timer videobuf2_common drm_kms_helper snd videodev cec panfrost soundcore rc_core mc gpu_sched gpio_charger sg drm pwm_fan leds_pwm fusb30x(C) drm_panel_orientation_quirks gpio_beeper cpufreq_dt nfsd auth_rpcgss dm_mod nfs_acl lockd grace lm75 sunrpc ip_tables x_tables autofs4 raid10 raid1 raid0 multipath linear raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx realtek md_mod dwmac_rk stmmac_platform stmmac mdio_xpcs adc_keys
[ 1849.341840] CPU: 4 PID: 1 Comm: systemd Tainted: G      D WC        5.8.16-rockchip64 #20.08.14
[ 1849.342606] Hardware name: Helios64 (DT)
[ 1849.342959] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--)
[ 1849.343464] pc : kmem_cache_alloc_node+0x190/0x3a0
[ 1849.343893] lr : kmem_cache_alloc_node+0x17c/0x3a0
[ 1849.344318] sp : ffff800011acbbd0
[ 1849.344615] x29: ffff800011acbbd0 x28: ffff0000f6e48400
[ 1849.345088] x27: 0000000000008204 x26: ffff80001007c5f0
[ 1849.345560] x25: ffff0000f6e88000 x24: ffff8000119f9000
[ 1849.346032] x23: 00000000ffffffff x22: 0000000000000cc0
[ 1849.346504] x21: ffff80001007c5f0 x20: ffff0000f6e48400
[ 1849.346976] x19: ffff8000141a39c0 x18: 0000000000000000
[ 1849.347448] x17: 0000000000000000 x16: 0000000000000000
[ 1849.347919] x15: 0000000000000000 x14: 0000000000000000
[ 1849.348391] x13: 0000000000000000 x12: 0000000000000000
[ 1849.348863] x11: 0000000000000000 x10: 0000000000000000
[ 1849.349334] x9 : 0000000000000000 x8 : 0000000000000000
[ 1849.349806] x7 : ffff0000f6e88000 x6 : ffff0000f6e88000
[ 1849.350278] x5 : 0000000000000001 x4 : ffff0000f6e88000
[ 1849.350749] x3 : 0000000000008204 x2 : ffff8000114f9650
[ 1849.351221] x1 : 0000000000000740 x0 : 0000000000000001
[ 1849.351694] Call trace:
[ 1849.351918]  kmem_cache_alloc_node+0x190/0x3a0
[ 1849.352318]  copy_process+0x1d0/0x1540
[ 1849.352654]  _do_fork+0x80/0x448
[ 1849.352945]  __do_sys_clone+0x6c/0x98
[ 1849.353274]  __arm64_sys_clone+0x20/0x30
[ 1849.353626]  el0_svc_common.constprop.0+0x70/0x188
[ 1849.354052]  do_el0_svc+0x24/0x90
[ 1849.354353]  el0_sync_handler+0x90/0x198
[ 1849.354705]  el0_sync+0x158/0x180
[ 1849.355009] Code: 17ffffbd b9402281 b94010e0 11000400 (f8616a62)
[ 1849.355557] ---[ end trace d25e6a4621bdedc7 ]---
[ 1849.356003] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 1849.356695] SMP: stopping secondary CPUs
[ 1849.357051] Kernel Offset: disabled
[ 1849.357366] CPU features: 0x240022,2000600c
[ 1849.357738] Memory Limit: none
[ 1849.358026] Rebooting in 90 seconds..

 

Even though subsequent serial console logs say that the kernel is starting, I can't access the device over SSH or serial anymore and have hard reset the device using the physical button.

Link to comment
Share on other sites

4 hours ago, barnumbirr said:

 Ouch, this is what I currently have:


root@helios64:~# ls -la /etc/udev/rules.d/
total 32
drwxr-xr-x 2 root root 4096 Oct 21 15:43 .
drwxr-xr-x 4 root root 4096 Aug 30 20:58 ..
-rw-r--r-- 1 root root 8821 Sep 14 18:07 99-openmediavault-dev-disk-by-id.rules
-rw-r--r-- 1 root root 1348 Jan  7  2020 99-openmediavault-md-raid.rules
-rw-r--r-- 1 root root 1647 Jan  7  2020 99-openmediavault-nonrot.rules
-rw-r--r-- 1 root root 1378 Jan  7  2020 99-openmediavault-scheduler.rules


I can't downgrade using armbian-config because it exists as soon as I confirm I'm okay with the "risk". Is there a way for me to downgrade using apt? ( don't know the list op packages that need to be specified).
If a downgrade isn't possible, can I reconfigure the ones currently installed? (again, don't know the package list)

EDIT: after about 30 minutes, my Helios now reboots on it's own because of Kernel panic with the following logs:

  Reveal hidden contents


 1849.330507] Unable to handle kernel paging request at virtual address ffff8000141a4100
[ 1849.331220] Mem abort info:
[ 1849.331473]   ESR = 0x96000007
[ 1849.331803]   EC = 0x25: DABT (current EL), IL = 32 bits
[ 1849.332276]   SET = 0, FnV = 0
[ 1849.332551]   EA = 0, S1PTW = 0
[ 1849.332834] Data abort info:
[ 1849.333094]   ISV = 0, ISS = 0x00000007
[ 1849.333436]   CM = 0, WnR = 0
[ 1849.333705] swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000035dc000
[ 1849.334298] [ffff8000141a4100] pgd=00000000f7fff003, p4d=00000000f7fff003, pud=00000000f7ffe003, pmd=000000003ba6c003, pte=0000000000000000
[ 1849.335409] Internal error: Oops: 96000007 [#4] PREEMPT SMP
[ 1849.335904] Modules linked in: snd_soc_hdmi_codec hantro_vpu(C) rockchip_vdec(C) snd_soc_rockchip_i2s rockchip_rga rockchipdrm v4l2_h264 snd_soc_core videobuf2_dma_contig dw_mipi_dsi videobuf2_vmalloc videobuf2_dma_sg v4l2_mem2mem snd_pcm_dmaengine dw_hdmi snd_pcm videobuf2_memops videobuf2_v4l2 r8152 analogix_dp snd_timer videobuf2_common drm_kms_helper snd videodev cec panfrost soundcore rc_core mc gpu_sched gpio_charger sg drm pwm_fan leds_pwm fusb30x(C) drm_panel_orientation_quirks gpio_beeper cpufreq_dt nfsd auth_rpcgss dm_mod nfs_acl lockd grace lm75 sunrpc ip_tables x_tables autofs4 raid10 raid1 raid0 multipath linear raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx realtek md_mod dwmac_rk stmmac_platform stmmac mdio_xpcs adc_keys
[ 1849.341840] CPU: 4 PID: 1 Comm: systemd Tainted: G      D WC        5.8.16-rockchip64 #20.08.14
[ 1849.342606] Hardware name: Helios64 (DT)
[ 1849.342959] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--)
[ 1849.343464] pc : kmem_cache_alloc_node+0x190/0x3a0
[ 1849.343893] lr : kmem_cache_alloc_node+0x17c/0x3a0
[ 1849.344318] sp : ffff800011acbbd0
[ 1849.344615] x29: ffff800011acbbd0 x28: ffff0000f6e48400
[ 1849.345088] x27: 0000000000008204 x26: ffff80001007c5f0
[ 1849.345560] x25: ffff0000f6e88000 x24: ffff8000119f9000
[ 1849.346032] x23: 00000000ffffffff x22: 0000000000000cc0
[ 1849.346504] x21: ffff80001007c5f0 x20: ffff0000f6e48400
[ 1849.346976] x19: ffff8000141a39c0 x18: 0000000000000000
[ 1849.347448] x17: 0000000000000000 x16: 0000000000000000
[ 1849.347919] x15: 0000000000000000 x14: 0000000000000000
[ 1849.348391] x13: 0000000000000000 x12: 0000000000000000
[ 1849.348863] x11: 0000000000000000 x10: 0000000000000000
[ 1849.349334] x9 : 0000000000000000 x8 : 0000000000000000
[ 1849.349806] x7 : ffff0000f6e88000 x6 : ffff0000f6e88000
[ 1849.350278] x5 : 0000000000000001 x4 : ffff0000f6e88000
[ 1849.350749] x3 : 0000000000008204 x2 : ffff8000114f9650
[ 1849.351221] x1 : 0000000000000740 x0 : 0000000000000001
[ 1849.351694] Call trace:
[ 1849.351918]  kmem_cache_alloc_node+0x190/0x3a0
[ 1849.352318]  copy_process+0x1d0/0x1540
[ 1849.352654]  _do_fork+0x80/0x448
[ 1849.352945]  __do_sys_clone+0x6c/0x98
[ 1849.353274]  __arm64_sys_clone+0x20/0x30
[ 1849.353626]  el0_svc_common.constprop.0+0x70/0x188
[ 1849.354052]  do_el0_svc+0x24/0x90
[ 1849.354353]  el0_sync_handler+0x90/0x198
[ 1849.354705]  el0_sync+0x158/0x180
[ 1849.355009] Code: 17ffffbd b9402281 b94010e0 11000400 (f8616a62)
[ 1849.355557] ---[ end trace d25e6a4621bdedc7 ]---
[ 1849.356003] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[ 1849.356695] SMP: stopping secondary CPUs
[ 1849.357051] Kernel Offset: disabled
[ 1849.357366] CPU features: 0x240022,2000600c
[ 1849.357738] Memory Limit: none
[ 1849.358026] Rebooting in 90 seconds..

 

Even though subsequent serial console logs say that the kernel is starting, I can't access the device over SSH or serial anymore and have hard reset the device using the physical button.

You should be able to just create a file 90-helios64-hwmon.rules in the /etc/udev/rules.d/ directory with the above text and reboot and it will create the /dev/fan* entries for you.  That worked for me.

Link to comment
Share on other sites

2 hours ago, tekrantz said:

You should be able to just create a file 90-helios64-hwmon.rules in the /etc/udev/rules.d/ directory with the above text and reboot and it will create the /dev/fan* entries for you.  That worked for me.

Managed to run armbian-config to downgrade to kernel version 5.8.14. Thought that would be good enough to fix it but now the device just hangs at "Starting kernel ..." Can't access it via SSH either.
Here's the output of the serial console:
 

Spoiler


DDR Version 1.24 20191016
In
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
256B stride
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x40
ch 1 ddrconfig = 0x101, ddrsize = 0x40
pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD
ddr_set_rate to 328MHZ
ddr_set_rate to 666MHZ
ddr_set_rate to 928MHZ
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
ddr_set_rate to 416MHZ, ctl_index 0
ddr_set_rate to 856MHZ, ctl_index 1
support 416 856 328 666 928 MHz, current 856MHz
OUT
Boot1: 2019-03-14, version: 1.19
CPUId = 0x0
ChipType = 0x10, 256
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=30436MB
FwPartOffset=2000 , 0
StorageInit ok = 79326
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT 0x3380ec0 signature is wrong
recovery gpt...
GPT 0x3380ec0 signature is wrong
recovery gpt fail!
LoadTrust Addr:0x4000
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xdd6b0
RunBL31 0x40000
NOTICE:  BL31: v1.3(debug):42583b6
NOTICE:  BL31: Built : 07:55:13, Oct 15 2019
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1190): pd status 3e
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2020.07-armbian (Oct 19 2020 - 08:25:23 +0200)

SoC: Rockchip rk3399
Reset cause: POR
DRAM:  3.9 GiB
PMIC:  RK808
SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
MMC:   mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Model: Helios64
Revision: 1.2 - 4GB non ECC
Net:   eth0: ethernet@fe300000
scanning bus for devices...
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
3185 bytes read in 6 ms (517.6 KiB/s)
## Executing script at 00500000
Boot script loaded from mmc 1
208 bytes read in 6 ms (33.2 KiB/s)
16004897 bytes read in 682 ms (22.4 MiB/s)
27275776 bytes read in 1158 ms (22.5 MiB/s)
79946 bytes read in 14 ms (5.4 MiB/s)
2698 bytes read in 10 ms (262.7 KiB/s)
Applying kernel provided DT fixup script (rockchip-fixup.scr)
## Executing script at 09000000
## Loading init Ramdisk from Legacy Image at 06000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    16004833 Bytes = 15.3 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Ramdisk to f4fa3000, end f5ee66e1 ... OK
   Loading Device Tree to 00000000f4f27000, end 00000000f4fa2fff ... OK

Starting kernel ...

 

 

 

EDIT: tried to fix the system via chroot, downgraded to kernel 5.8.13 but that's even worse as it just kernel panics on boot:

Spoiler

DDR Version 1.24 20191016
In
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=2048MB
256B stride
channel 0
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x18
MR4=0x1
MR5=0x1
MR8=0x10
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x40
ch 1 ddrconfig = 0x101, ddrsize = 0x40
pmugrf_os_reg[2] = 0x32C1F2C1, stride = 0xD
ddr_set_rate to 328MHZ
ddr_set_rate to 666MHZ
ddr_set_rate to 928MHZ
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
ddr_set_rate to 416MHZ, ctl_index 0
ddr_set_rate to 856MHZ, ctl_index 1
support 416 856 328 666 928 MHz, current 856MHz
OUT
Boot1: 2019-03-14, version: 1.19
CPUId = 0x0
ChipType = 0x10, 253
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=30436MB
FwPartOffset=2000 , 0
StorageInit ok = 79300
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT 0x3380ec0 signature is wrong
recovery gpt...
GPT 0x3380ec0 signature is wrong
recovery gpt fail!
LoadTrust Addr:0x4000
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xdd6b0
RunBL31 0x40000
NOTICE:  BL31: v1.3(debug):42583b6
NOTICE:  BL31: Built : 07:55:13, Oct 15 2019
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1190): pd status 3e
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2020.07-armbian (Oct 19 2020 - 08:25:23 +0200)

SoC: Rockchip rk3399
Reset cause: POR
DRAM:  3.9 GiB
PMIC:  RK808
SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
MMC:   mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Model: Helios64
Revision: 1.2 - 4GB non ECC
Net:   eth0: ethernet@fe300000
scanning bus for devices...
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
3185 bytes read in 5 ms (622.1 KiB/s)
## Executing script at 00500000
Boot script loaded from mmc 1
208 bytes read in 5 ms (40 KiB/s)
16002766 bytes read in 681 ms (22.4 MiB/s)
27275776 bytes read in 1161 ms (22.4 MiB/s)
79946 bytes read in 13 ms (5.9 MiB/s)
2698 bytes read in 11 ms (239.3 KiB/s)
Applying kernel provided DT fixup script (rockchip-fixup.scr)
## Executing script at 09000000
## Loading init Ramdisk from Legacy Image at 06000000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    16002702 Bytes = 15.3 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Ramdisk to f4fa3000, end f5ee5e8e ... OK
   Loading Device Tree to 00000000f4f27000, end 00000000f4fa2fff ... OK

Starting kernel ...

[   35.795879] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[   35.796384] Modules linked in: snd_soc_hdmi_codec hantro_vpu(C) rockchip_vdec(C) rockchipdrm rockchip_rga snd_soc_rockchip_i2s v4l2_h264 dw_mipi_dsi videobuf2_dma_contig snd_soc_core dw_hdmi v4l2_mem2mem videobuf2_vmalloc videobuf2_dma_sg r8152 analogix_dp snd_pcm_dmaengine videobuf2_memops videobuf2_v4l2 snd_pcm drm_kms_helper panfrost cec videobuf2_common snd_timer videodev rc_core gpu_sched sg snd drm mc soundcore gpio_charger drm_panel_orientation_quirks fusb30x(C) leds_pwm pwm_fan gpio_beeper cpufreq_dt nfsd auth_rpcgss nfs_acl lockd grace dm_mod sunrpc lm75 ip_tables x_tables autofs4 raid10 raid1 raid0 multipath linear raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx realtek md_mod dwmac_rk stmmac_platform stmmac mdio_xpcs adc_keys
[   35.802325] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G         C        5.8.13-rockchip64 #20.08.8
[   35.803100] Hardware name: Helios64 (DT)
[   35.803455] pstate: 00000085 (nzcv daIf -PAN -UAO BTYPE=--)
[   35.803959] pc : __ww_mutex_lock.isra.0+0x148/0x808
[   35.804397] lr : rcu_note_context_switch+0xb8/0x550
[   35.804829] sp : ffff800011c63e20
[   35.805128] x29: ffff800011c63e20 x28: ffff0000f6ea6580
[   35.805601] x27: ffff800011a02000 x26: 0000000000000000
[   35.806075] x25: 000000000000ff8e x24: ffff800011809980
[   35.806548] x23: 0000000000000000 x22: ffff0000f6ea6590
[   35.807021] x21: ffff800011269a78 x20: ffff8000115087c0
[   35.807494] x19: ffff8000115087d0 x18: 0000000000000000
[   35.807966] x17: 0000000000000000 x16: 0000000000000000
[   35.808438] x15: 0000000000000000 x14: 0000063c0d107ae6
[   35.808910] x13: 0000000000000081 x12: 0000000000000089
[   35.809382] x11: 0000000000000001 x10: 0000000000000a20
[   35.809855] x9 : ffff800011c63e70 x8 : ffff0000f6ea7000
[   35.810327] x7 : 00000000ffffffff x6 : ffff800011265a52
[   35.810799] x5 : 00ffffffffffffff x4 : ffff0000f77c9898
[   35.811271] x3 : ffff8000114ee018 x2 : ffff0000f6ea6590
[   35.811743] x1 : 000000000000002a x0 : 0000000000000028
[   35.812216] Call trace:
[   35.812442]  __ww_mutex_lock.isra.0+0x148/0x808
[   35.812848]  rcu_note_context_switch+0x78/0x550
[   35.813253]  __schedule+0xac/0x808
[   35.813559]  schedule_idle+0x28/0x48
[   35.813882]  do_idle+0x184/0x288
[   35.814173]  cpu_startup_entry+0x24/0x68
[   35.814528]  secondary_start_kernel+0x140/0x178
[   35.814937] Code: 79402f79 aa1603e2 eb1602ff 540002c0 (f9400ee0)
[   35.815487] ---[ end trace 0f1e6a4a6bca601e ]---
[   35.815899] Kernel panic - not syncing: Attempted to kill the idle task!
[   35.816495] SMP: stopping secondary CPUs
[   35.816856] Kernel Offset: disabled
[   35.817171] CPU features: 0x240022,2000600c
[   35.817543] Memory Limit: none
[   35.817828] Rebooting in 90 seconds..

 


 

Link to comment
Share on other sites

On 10/18/2020 at 5:26 PM, gprovost said:

 

It might be that one side of front panel (the side with red LEDs) touch a bit the metal opening shorting the LED therefore lighting them up.

Could you trip to loosen a bit the 2x screws holding the front panel, then push a bit back the PCB, then tighten again the screw.

Otherwise putting a piece of tape on the PCB side that touch the metal opening, to isolate the LED, could help.

 

For next batch we will have to increase more the gap because mass production doesn't seem to meet exactly our tolerance requirement  :-/

 

Thanks, the trick of putting a piece of tape on the PCB side that touches the metal opening solved the issue for me too.
It should be added to the wiki...

Link to comment
Share on other sites

8 hours ago, gprovost said:

@barnumbirr Not really sure what happened to your setup and it's going to be hard to help will all those sequence of event you posted.

I would suggest you just do a fresh install. You can find previous build here https://archive.armbian.com/helios64/archive/

@gprovostI'll do just that: I have a full SD Card backup of 5.8.13 around so I'll give that a spin.
Quick question: as I'm not running the stock fans, is there a way for /etc/fancontrol not to be overwritten at every update?

Link to comment
Share on other sites

On 10/18/2020 at 8:56 PM, Bethlehem said:

My only concern now is the CPU temperature. It sometimes runs up to around 65-70 C. I got a spare 2-pin cpu fan that I bought for my Raspberry Pi 4 and I think it could be installed onto the Helios64's heatsink. I just have to figure out where should the two power pins be put onto.

That's easy : do NOT follow the instructions from Kobol. Turn the fans the other way so that they PUSH air in the enclosure. I'm around 43°C in idle AND compilation (that's still a lot for idle though, but way more acceptable).

Edited by Salamandar
Link to comment
Share on other sites

16 minutes ago, Salamandar said:

That's easy : do NOT follow the instructions from Kobol. Turn the fans the other way so that they PUSH air in the enclosure. I'm around 43°C in idle AND compilation (that's still a lot for idle though, but way more acceptable).

Wait, this can't be right. That's a 30°C delta over the standard fan configuration :O

Link to comment
Share on other sites

Hello,

 

After I had issues with DNS resolution on my Helios64, I flashed a brand new Armbian image and now I cannot seem to connect to any devices on the network.

I tried pinging my computer, router and 8.8.8.8 without success (which I can from my computers or router). I literally just I set root's password.

 

I literally have no idea why this is happening. Every other computer in the network are working fine and the Helios64 has no problem the first few days I used it.

 

Big thanks to anyone willing to help me!

 

---

 

Version: Armbian 20.08.13 Debian 10 Buster (Kernel 5.8.16)

 

DHCP config:

My router's DHCP is set to give 192.168.0.110 to my Helio64's MAC address.

Edited by axeleroy
Clarifying that I tried pinging from other devices
Link to comment
Share on other sites

Forgot to add ifconfig output, it might be useful

 

root@helios64:~# ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.0.110  netmask 255.255.255.0  broadcast 192.168.0.255
        inet6 fe80::5550:854d:6ad0:b6d7  prefixlen 64  scopeid 0x20<link>
        ether 64:62:66:d0:03:7c  txqueuelen 1000  (Ethernet)
        RX packets 390  bytes 60863 (59.4 KiB)
        RX errors 0  dropped 1  overruns 0  frame 0
        TX packets 384  bytes 35588 (34.7 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 27  

eth1: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 64:62:66:d0:03:7d  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 32  bytes 2640 (2.5 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 32  bytes 2640 (2.5 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 

I also did further testing:

  • When pinging from my router, I get a timeout (set to 2000ms)
  • When pinging my desktop and laptop computers from the Helios64, I get a response.
  • When pinging its IP (192.168.0.110) from the Helios64, I get a response.
  • When pinging the Helios from my desktop and laptop, I get a response.
Link to comment
Share on other sites

Forgot to add ifconfig output, it might be useful
 
root@helios64:~# ifconfigeth0: flags=4163  mtu 1500       inet 192.168.0.110  netmask 255.255.255.0  broadcast 192.168.0.255       inet6 fe80::5550:854d:6ad0:b6d7  prefixlen 64  scopeid 0x20       ether 64:62:66:d0:03:7c  txqueuelen 1000  (Ethernet)       RX packets 390  bytes 60863 (59.4 KiB)       RX errors 0  dropped 1  overruns 0  frame 0       TX packets 384  bytes 35588 (34.7 KiB)       TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0       device interrupt 27  eth1: flags=4099  mtu 1500       ether 64:62:66:d0:03:7d  txqueuelen 1000  (Ethernet)       RX packets 0  bytes 0 (0.0        RX errors 0  dropped 0  overruns 0  frame 0       TX packets 0  bytes 0 (0.0        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0lo: flags=73  mtu 65536       inet 127.0.0.1  netmask 255.0.0.0       inet6 ::1  prefixlen 128  scopeid 0x10       loop  txqueuelen 1000  (Local Loopback)       RX packets 32  bytes 2640 (2.5 KiB)       RX errors 0  dropped 0  overruns 0  frame 0       TX packets 32  bytes 2640 (2.5 KiB)       TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 
I also did further testing:

  • When pinging from my router, I get a timeout (set to 2000ms)
  • When pinging my desktop and laptop computers from the Helios64, I get a response.
  • When pinging its IP (192.168.0.110) from the Helios64, I get a response.
  • When pinging the Helios from my desktop and laptop, I get a response.
Maybe its an ip conflict?
apt-get install arp-scan
arp-scan --localnet -l

I didnt have any net problems with eth0 with any version.
Because of stability issues i am on kernel 5.8 armbian release .10 though

Gesendet von meinem CLT-L29 mit Tapatalk

Link to comment
Share on other sites

19 hours ago, flower said:

Maybe its an ip conflict?
apt-get install arp-scan
arp-scan --localnet -l

 

I switched to eth1 to install it, then switched back to eth0 and ran arp-scan.

There are lots of reference to my decommissioned Raspberry Pi on 192.168.0.110. Turns out I forgot to delete the ARP binding on my router to make sure my old Pi was given 192.168.0.110.
PEBKAC…

 

Thanks a lot anyway!

Edited by axeleroy
Link to comment
Share on other sites

Received my Helios64 and installed Armbian Focal. All seems well for me, except:

 

$ lscpu
Architecture:                    aarch64
CPU op-mode(s):                  32-bit, 64-bit
Byte Order:                      Little Endian
CPU(s):                          6
On-line CPU(s) list:             0-5
Thread(s) per core:              1
Core(s) per socket:              3
Socket(s):                       2
NUMA node(s):                    1
Vendor ID:                       ARM
Model:                           4
Model name:                      Cortex-A53
Stepping:                        r0p4
CPU max MHz:                     1800.0000
CPU min MHz:                     408.0000
BogoMIPS:                        48.00
NUMA node0 CPU(s):               0-5
Vulnerability Itlb multihit:     Not affected
Vulnerability L1tf:              Not affected
Vulnerability Mds:               Not affected
Vulnerability Meltdown:          Not affected
Vulnerability Spec store bypass: Vulnerable
Vulnerability Spectre v1:        Mitigation; __user pointer sanitization
Vulnerability Spectre v2:        Vulnerable
Vulnerability Srbds:             Not affected
Vulnerability Tsx async abort:   Not affected
Flags:                           fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid

 

Are there mitigations in the works for those speculative store bypass and SPECTRE v2 vulnerabilities?

 

Also, is there any way to monitor the UPS battery's charge status? I've found gpio-charger/status, which gives me "Not charging" when it's fully topped up and "Charging" when it's charging or (confusingly) discharging, but I can't find anything else of use in there.

Link to comment
Share on other sites

1 hour ago, Gareth Halfacree said:

Are there mitigations in the works for those speculative store bypass and SPECTRE v2 vulnerabilities?

 

not sure about arm but afaik they are already mitigated in linux. you may need to compile an own kernel.

 

i wouldnt though: as long as you dont plan to use your helios64 as a cloud hosting platform for customers or run untrusted code there is no need to do so. its not worth the performance impact.

Link to comment
Share on other sites

11 hours ago, flower said:

 

not sure about arm but afaik they are already mitigated in linux. you may need to compile an own kernel.

 

I'd reckon Armbian maintainers turn these on by default, you can grep for them (if you know the name of the mitigation symbols in the kernel) in /boot/config-*. E.g. the CONFIG_CPU_SPECTRE symbol on my Exynos-based Odroid XU4:

 

# grep -i spectre /boot/config-5.4.72-odroidxu4
CONFIG_CPU_SPECTRE=y

 

Apparently 5.10 comes with rewritten Spectre mitigation code for ARM64.

Edited by Borromini
Extra background information.
Link to comment
Share on other sites

Ok, folks its over

 

this unit was sold as a "high quality nas". i was expecting a little tweaking and some flaws but not those instabilites. they are just inaccable for a nas. a nas is about data integrity! and there is no filesystem which likes regular kernel locks. if kobol would sit in germany i would send it back.

 

i have migrated all disks and docker containers to an old i6900k i had lying around. i will have a look again in a few months.

 

btw: i even advertised and sold this unit to friends and would have continued to do so.

 

but: no official communication - and even your install page is broken since weeks - thats just too much.

 

sad

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines