eth1 (2.5) vanished: Upgrade to 20.11.3 / 5.9.14-rockchip64
After upgrade to Armbian 20.11.3 Buster with Linux 5.9.14-rockchip64 eth1 has vanished.
❯ sudo ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 64:62:66:d0:06:18 brd ff:ff:ff:ff:ff:ff
Any ideas?
http://ix.i
usb 4-1.4: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
r8152 4-1.4:1.0 eth1: Tx status -2
r8152 4-1.4:1.0 eth1: Tx timeout
I am getting a lot of these in the logs. Sometimes 5 or 6 times in a row. Entire network activity pauses for a few seconds when I get one of these.
Could it be because of a bad cable or something? Helios64 is connected to a Zyxel XGS1010-12 switch on its 2.5gbps ports via a CAT5E 26AWG cable. Cable has metal jacket jacks and everything. I read so