Jump to content

OPI3 without LAN and WIFI


madade

Recommended Posts

HI to all,

 

excuse me but this is my first msg.

 

I have a OPI3 board and I try different OS (Arabian, Ubuntu, Debian) all in different release but I do not have wifi and lan.

 

for wifi I have already try with copy firmware file but is is the same 

for lan I have in dmesg eth0. UP and DOWN.

 

In my experience I have found only Ubuntu Xenial 4.9.118 on the Orange.org web site with wifi OK.

 

can you help me?

 

Thanks

Link to comment
Share on other sites

HI,

 

excuse me for my bad spell "Arabian", I am sorry.

 

I have found :

for lan I see it is all ok if I use a lan switch.

wifi is broken.

i have try with all Arabian version, All Ubuntu version and all Debian version. 

I have wifi ok only with Ubuntu Xenial 4.9.118 on the raspberry web site. It use a BRCMHD module.

I hope this is important to you.

 

Thanks

Link to comment
Share on other sites

If it is indeed Arabian and not Armbian I think this is not the right place for you.

I also did not know that Raspberrypi deals with OrangePi devices. In this case also not the right place for your ;)

 

If it is Armbian however then I need to mention that broken ethernet is a known issue at the moment and might be fixed in the next release on February. Support state of internal WiFi is unknown.

Link to comment
Share on other sites

I to all,

 

There is any news about Wifi and Orange Pi 3? 

I hava try with all image on Orange web site with different Armbian but it is the same.

I have verified with Armbian 22.08.2 jammy 5.15.48 for lte and it is more spidy but no wifi.

I have see in so tread request for enable hot spot with Orange?

Please can you help me with any news?

Thanks to all

Link to comment
Share on other sites

On 11/8/2022 at 6:32 AM, madade said:

There is any news about Wifi and Orange Pi 3?


Should run better following this merge. Will be pushed to stable repository once tested - you can try by switching to nightly beta repository (armbian-config -> system).

Link to comment
Share on other sites

10 hours ago, Paulo12333 said:

Hello I installed Armbian 22.11 Jammy XFCE and try to connect to Wi-FI without success. Also changed to nightly without success.

 

(without providing complete logs we anyway don't know what you are talking about and there is not possible to provide any help. This below is a guess what you are doing wrong.)

 

After you download images, de-freeze firmware upgrade. In command shell:
 

sudo armbian-config -> system -> De-freeze (enable Armbian kernel upgrades)

 

exit

 

sudo apt update
sudo apt upgrade

 

Reboot and wifi must works. It works perfectly fine for me:
https://paste.armbian.com/nolizanone
 

With such hardware - pay attention to the wifi chip / version:
IMG_20230125_090039.jpg

 

If you are not having LTS board containing this chip, you need a different image:


Click: https://www.armbian.com/orangepi3-lts/

Read: "Images for non LTS version can be downloaded here"

Link to comment
Share on other sites

7 hours ago, madade said:

 

I have try to create a memory card with Armbian 22 with xfce and Armbian 23 with XFCE and CLI but i have only busibox.


You need to provide more information:
- which image (link)
- which hardware revision (perhaps a photo)
- where booting ends
- is this the only SD card you have

...

Link to comment
Share on other sites

Hi Igor,

 

thanks for your support, at this moment i have only 1 memory card but it is good i use it for more project.

 

I have try with Armbian_22.11.1_Orangepi3_jammy_current_5.15.80_xfce_desktop.img.xz

Armbian_23.02.2_Orangepi3_jammy_current_5.15.93_xfce_desktop.img.xz

Armbian_23.02.2_Orangepi3_jammy_current_5.15.93_gnome_desktop.img.xz

Armbian_23.02.2_Orangepi3_jammy_current_5.15.93.img.xz

and also Armbian_23.02.2_Orangepi3-lts_jammy_current_5.15.93.img.xz

 

Do you have any idea how to fix the problem?

 

thanks

 

Link to comment
Share on other sites

@madade  Why do you ask for help again when you haven't provided the information that Igor asked of you.

He asked you for four things:

On 3/9/2023 at 11:50 AM, Igor said:

You need to provide more information:
- which image (link)
- which hardware revision (perhaps a photo)
- where booting ends
- is this the only SD card you have

You only provided an answer to one request.

 

Which hardware revision (picture please)?

Where does booting end? (capture of the console output of the boot)

Try another sd card.  (Just because a card works in some circumstances, doesn't mean it will work for this purpose, sbc's are finicky when it comes to sd cards at times)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines