Jump to content

Should I be worried about this “ata1: softreset failed (1st FIS failed)”?


tmb

Recommended Posts

I’ve googled it but can’t decide, the drive works just fine (it’s the 1st of the three disks I have in the box), no performance issues when copying from/to the box.

I’m currently on “Armbian 20.11”, barely get the time to play with the setup due to work assignments, plan to update soon.

 

Thanks!

(PS. Newbie here)

 

[   13.298079] ata1: softreset failed (1st FIS failed)
[   18.449169] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   18.467303] ata1.00: ATA-10: ST6000VN0033-2EE110, SC60, max UDMA/133
[   18.467315] ata1.00: 11721045168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[   18.470029] ata1.00: configured for UDMA/133
[   18.470721] scsi 0:0:0:0: Direct-Access     ATA      ST6000VN0033-2EE SC60 PQ                                                                                                                                                             : 0 ANSI: 5
[   18.472237] sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00 TB/5                                                                                                                                                             .46 TiB)
[   18.472247] sd 0:0:0:0: [sda] 4096-byte physical blocks
[   18.472299] sd 0:0:0:0: [sda] Write Protect is off
[   18.472309] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   18.472393] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does                                                                                                                                                             n't support DPO or FUA
[   18.580573]  sda: sda1
[   18.583350] sd 0:0:0:0: [sda] Attached SCSI disk
[   18.949151] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   18.959809] ata2.00: ATA-10: ST6000VN0033-2EE110, SC60, max UDMA/133
[   18.959822] ata2.00: 11721045168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[   18.962526] ata2.00: configured for UDMA/133
[   18.963133] scsi 1:0:0:0: Direct-Access     ATA      ST6000VN0033-2EE SC60 PQ                                                                                                                                                             : 0 ANSI: 5
[   18.964436] sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5                                                                                                                                                             .46 TiB)
[   18.964451] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[   18.964520] sd 1:0:0:0: [sdb] Write Protect is off
[   18.964534] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   18.964651] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, does                                                                                                                                                             n't support DPO or FUA
[   19.017200]  sdb: sdb1
[   19.019847] sd 1:0:0:0: [sdb] Attached SCSI disk
[   19.441176] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   19.450989] ata3.00: ATA-10: ST6000VN0033-2EE110, SC60, max UDMA/133
[   19.451001] ata3.00: 11721045168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[   19.453715] ata3.00: configured for UDMA/133
[   19.454064] scsi 2:0:0:0: Direct-Access     ATA      ST6000VN0033-2EE SC60 PQ                                                                                                                                                             : 0 ANSI: 5
[   19.455164] sd 2:0:0:0: [sdc] 11721045168 512-byte logical blocks: (6.00 TB/5                                                                                                                                                             .46 TiB)
[   19.455178] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[   19.455248] sd 2:0:0:0: [sdc] Write Protect is off
[   19.455262] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[   19.455378] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, does                                                                                                                                                             n't support DPO or FUA
[   19.507285]  sdc: sdc1
[   19.509063] sd 2:0:0:0: [sdc] Attached SCSI disk
[   19.767590] ata4: SATA link down (SStatus 0 SControl 300)
[   20.079588] ata5: SATA link down (SStatus 0 SControl 300)
 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines