tmb Posted March 18, 2021 Share Posted March 18, 2021 I’ve googled it but can’t decide, the drive works just fine (it’s the 1st of the three disks I have in the box), no performance issues when copying from/to the box. I’m currently on “Armbian 20.11”, barely get the time to play with the setup due to work assignments, plan to update soon. Thanks! (PS. Newbie here) [ 13.298079] ata1: softreset failed (1st FIS failed) [ 18.449169] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 18.467303] ata1.00: ATA-10: ST6000VN0033-2EE110, SC60, max UDMA/133 [ 18.467315] ata1.00: 11721045168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 18.470029] ata1.00: configured for UDMA/133 [ 18.470721] scsi 0:0:0:0: Direct-Access ATA ST6000VN0033-2EE SC60 PQ : 0 ANSI: 5 [ 18.472237] sd 0:0:0:0: [sda] 11721045168 512-byte logical blocks: (6.00 TB/5 .46 TiB) [ 18.472247] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 18.472299] sd 0:0:0:0: [sda] Write Protect is off [ 18.472309] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 18.472393] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 18.580573] sda: sda1 [ 18.583350] sd 0:0:0:0: [sda] Attached SCSI disk [ 18.949151] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 18.959809] ata2.00: ATA-10: ST6000VN0033-2EE110, SC60, max UDMA/133 [ 18.959822] ata2.00: 11721045168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 18.962526] ata2.00: configured for UDMA/133 [ 18.963133] scsi 1:0:0:0: Direct-Access ATA ST6000VN0033-2EE SC60 PQ : 0 ANSI: 5 [ 18.964436] sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5 .46 TiB) [ 18.964451] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 18.964520] sd 1:0:0:0: [sdb] Write Protect is off [ 18.964534] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 18.964651] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 19.017200] sdb: sdb1 [ 19.019847] sd 1:0:0:0: [sdb] Attached SCSI disk [ 19.441176] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 19.450989] ata3.00: ATA-10: ST6000VN0033-2EE110, SC60, max UDMA/133 [ 19.451001] ata3.00: 11721045168 sectors, multi 0: LBA48 NCQ (depth 32), AA [ 19.453715] ata3.00: configured for UDMA/133 [ 19.454064] scsi 2:0:0:0: Direct-Access ATA ST6000VN0033-2EE SC60 PQ : 0 ANSI: 5 [ 19.455164] sd 2:0:0:0: [sdc] 11721045168 512-byte logical blocks: (6.00 TB/5 .46 TiB) [ 19.455178] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 19.455248] sd 2:0:0:0: [sdc] Write Protect is off [ 19.455262] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 19.455378] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 19.507285] sdc: sdc1 [ 19.509063] sd 2:0:0:0: [sdc] Attached SCSI disk [ 19.767590] ata4: SATA link down (SStatus 0 SControl 300) [ 20.079588] ata5: SATA link down (SStatus 0 SControl 300) 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.