Jump to content

[Invalid] - Rockpi 4C - hardware issues on 5.10 and 4.4


jeyjey

Recommended Posts

Hello. I have a new Rockpi 4C. I am caming out crazy because I cannot understand some hardware issues. If I use the 5.10 kernel all hardware is working less the GPU. The images are bad and the lines swing everywhere. But the CPU is pretty cool and sometimes the heat-sink became hot, but not forever. The resolution is only the 1024 X 768!! The bluetooth, with the kernel 5.10, is perfectly working.

With the magic Armbian-Config utility I installed the legacy kernel 4.4. I switched on that kernel and the GPU is perfect now and I am reading what I am writing. BUT:

The bluetooth service is gone. Definitively! The USB ports are gone too!! There is only one usb port working now at the moment and in that port there is the keyboard that I am touching. The heatsink of the CPU is hot. With both kernel the M.2 disk is seen and runs fast. See the images below and try to look them.

I tried a Majaro version of the ARM linux. The problem is the same: same issues on same kernel.

WhatsApp Image 2021-04-22 at 22.53.33(5).jpeg

WhatsApp Image 2021-04-22 at 22.53.33(4).jpeg

WhatsApp Image 2021-04-22 at 22.53.33(1).jpeg

Link to comment
Share on other sites

Your issue report is not a valid bug report per the Armbian bug reporting instructions (https://www.armbian.com/bugs).  With limited resources the Armbian project is only able to spend time on issues where all the requested information has been provided and for only the boards/images/software that are supported.  Your report is invalid for one or more of the following reasons (non-exhaustive list):

 

  • it is for an unsupported board or image (CSC/EOS/WIP/edge)
  • it is for software that is not supported (such as userspace modules installed on top of the core operating system)
  • it has been logged in the wrong forum (for example requests for help that are not actual bug reports)
  • it lacks requested data (armbianmonitor output)
  • it could have been easily solved by a quick search and/or reading documentation

 

Please review what you have submitted and the bug logging instructions (https://www.armbian.com/bugs) and either add the required information or open a new topic in the correct forum (such as Common issues / peer to peer technical support or General chit chat)

Link to comment
Share on other sites

Hello. Sorry. It was not a bug reporting. It was only a 3399 talking. I don't know where I should transfert the topic. And I cannot do that. Please, could you move the topic where you consider the right place to? Thanks.

Link to comment
Share on other sites

This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines