Unexpected shutdown and doesn't reboot + exFat USB mounting issue


Recommended Posts

Armbianmonitor:

Hi all,

I'm a bit lost to find the root cause so I share all what I noticed 

Installed
- I'm using Armbian_21.02.4_Odroidn2_buster_current_5.10.27.img image on a eMMC 64Gb on an Odroid N2+ board
- I installed docker and have two containers activated from portainer/portainer-ce and linuxserver/plex images
- I installed exFat-fuse and exFat-utils to be able to mount an external exFat drive connected via USB
Issues
- Right after booting, the USB drive is mounted but is not seen by Plex. Restarting the plex container make the trick but I have to do it each time
- After some time, the mounting point is not anymore accessible and give me the ' Transport endpoint is not connected' error message'
Whatever I tried, I'm not able to get it properly mounted again without rebooting the board (plug out, plug in)
- After some time, the board is like 'shutdown'. Not able to reach it by ssh and not even have ip anymore
- At anytime, if I try a 'soft' reboot, I have the same issue (red led on, blue one blinking) and I need to plug out/in to get it working

I have searched a lot, the only thing I found was to plug the usb disk on the usb port near the hdmi port but I still have this issues

**Edit** seems I don't have the shutdown issue for hours but again the 'Transport endpoint is not connected' and soft reboot issue.
Thanks in advance for any help
Please note that I previously use the same setup on RPi4 without any issue so I don't think the USB drive is the cause
Tom

Link to post
Share on other sites
Armbian is a community driven open source project. Do you like to contribute your code?

After a few days running with my USB Drive plugged near HDMI port, I can say that I don't have anymore :

- 'shutdown' state of the board

- problem to have a soft reboot

But I'm still issuing :

' Transport endpoint is not connected' error message after a few hours

- Not all the time (because it happens to work one time only), PLEX not seeing the mounted drive after booting and need a Plex container restart

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...