noob1 Posted May 20, 2021 Share Posted May 20, 2021 i have orange pi mini 2 board that fails to go past uboot. i used buster and focal images from here. here is the uboot snippet: U-Boot SPL 2021.04-armbian (May 06 2021 - 18:16:10 +0000) DRAM: 1024 MiB Trying to boot from MMC1 U-Boot 2021.04-armbian (May 06 2021 - 18:16:10 +0000) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi 2 DRAM: 1 GiB MMC: mmc@1c0f000: 0, mmc@1c10000: 1 Loading Environment from FAT... Card did not respond to voltage select! : -110 In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Net: phy interface0 eth0: ethernet@1c30000 starting USB... Bus usb@1c1b000: nothing happens after this. i have tried with different sd cards with same results. so i have a few quesions: is the board damaged? or i have used the wrong image or is there some wrong configurations as the image and boards aren't exactly identical. Board: Orangepi Zero+ 2 H3 0 Quote Link to comment Share on other sites More sharing options...
noob1 Posted May 21, 2021 Author Share Posted May 21, 2021 nevermind found tritim h3 board iamge that works fine 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.