Jump to content

Help me TX6 detect 3GB RAM


Recommended Posts

According to https://linux-sunxi.org/Tanix_TX6 there are two versions of the box, 2 GiB and 4 GiB of RAM. RAM size detection code on H6 should be pretty solid these days, but if you really think you have 4 GiB version, open the box and provide clear images of both board sides. That way we could count RAM chips and check markings on them to manually calculate RAM size and if it's incorrect, to get at least some idea what could be wrong.

 

P.S: Boards really do have 4 GiB of RAM, it's just that H6 can use only 3 GiB.

Link to comment
Share on other sites

59 minutes ago, jernej said:

According to https://linux-sunxi.org/Tanix_TX6 there are two versions of the box, 2 GiB and 4 GiB of RAM. RAM size detection code on H6 should be pretty solid these days, but if you really think you have 4 GiB version, open the box and provide clear images of both board sides. That way we could count RAM chips and check markings on them to manually calculate RAM size and if it's incorrect, to get at least some idea what could be wrong.

 

P.S: Boards really do have 4 GiB of RAM, it's just that H6 can use only 3 GiB.

I followed the instructions in this video with IMG 20.05 and detect enough 3GiB of RAM. Version 21.08 detect only 2GiB RAM

https://www.youtube.com/watch?v=GHk22VIxoIU

p/s: Version 21.08 cannot burn with dtb files

Link to comment
Share on other sites

Edit or delete the parameter (mem=2048M) from /boot/extlinux/extlinux.conf. It is used to limit the size of RAM to ensure that the system starts on any H6 models (there are models that cannot automatically determine the memory size correctly and do not start).

Link to comment
Share on other sites

7 hours ago, balbes150 said:

Edit or delete the parameter (mem=2048M) from /boot/extlinux/extlinux.conf. It is used to limit the size of RAM to ensure that the system starts on any H6 models (there are models that cannot automatically determine the memory size correctly and do not start).

Thank you very much, my device detect 3GB RAM on Armbian last version. Hope for the future, Tx6 can detect its full 4GB of RAM. Thanks mod

Link to comment
Share on other sites

1 hour ago, ngocdungvn said:

Hope for the future, Tx6 can detect its full 4GB of RAM.

Check U-Boot output on serial. It should say something like 4 GiB of RAM detected, 3 GiB used. That won't change, since it's impossible to use that extra GiB due to HW limitations.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines