armbian and firewall rules


 Share

0

Recommended Posts

Hi,

sorry, prop. a stupid question - but I was so far not figuring out the answer.

I have a helios64 running - pretty standard installation, including openmediavault and docker, as described on the kobol help page.

I realized that there are some firewall/iptables rules are set, as example:
 

tester@helios64:/etc# sudo iptables -L
Chain INPUT (policy DROP)
target     prot opt source               destination
ACCEPT     all  --  anywhere             anywhere             ctstate RELATED,ESTABLISHED
ACCEPT     icmp --  anywhere             anywhere             state NEW,RELATED,ESTABLISHED
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:http
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:https
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:8384
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:3128
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:1443
ACCEPT     udp  --  anywhere             anywhere             udp dpt:domain
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:domain
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:microsoft-ds
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:netbios-ssn
ACCEPT     udp  --  anywhere             anywhere             udp dpt:netbios-dgm
ACCEPT     udp  --  anywhere             anywhere             udp dpt:netbios-ns
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:ftp
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:49152
ACCEPT     tcp  --  anywhere             anywhere             tcp dpt:22000
ACCEPT     udp  --  anywhere             anywhere             udp dpt:1900

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination
DOCKER-USER  all  --  anywhere             anywhere
DOCKER-ISOLATION-STAGE-1  all  --  anywhere             anywhere
ACCEPT     all  --  anywhere             anywhere             ctstate RELATED,ESTABLISHED
DOCKER     all  --  anywhere             anywhere
ACCEPT     all  --  anywhere             anywhere
ACCEPT     all  --  anywhere             anywhere

...

 

What I was not able to figure out is, where these rules come from!?
In openmediafault no firewall rules are set. I also was not able to find any iptables settings in /etc/network, etc. 

 

Anyone an idea where these rules are configured? And with which service they are setup?

 

Thanks!

 

Link to post
Share on other sites

Donate and support the project!

 Share

0