Jump to content

Problems with the RTL8192cu driver


Elric
Go to solution Solved by Igor,

Recommended Posts

First of all: yes, I'd read phelums "Compiling RTL8189es driver" thread. If where was a solution for his thread, I didn't get it.
I'm using a BPi M1, installed downloaded image (Armbian_21.05.1_Bananapi_buster_current_5.10.34.img) switched 5.10.43, updated "Firmware" and boot loader.

 

uname -a
Linux bananapi 5.10.43-sunxi #21.05.6 SMP Mon Jun 21 15:07:45 UTC 2021 armv7l GNU/Linux

 

First I installed and configured openvpn, the next step would be wifi, so plugged in my wireless adapter:

 

root@bananapi:~# lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS]
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

noticed having a RTL8188CUS, so the I should be fine with RTL8192C driver.

 

Then I unplugged the device and followed the instructions given in https://docs.armbian.com/User-Guide_Advanced-Features/

 

build console output

Spoiler

root@bananapi:~/rtl8192cu-fixes# make ARCH=arm
make ARCH=arm CROSS_COMPILE= -C /lib/modules/5.10.43-sunxi/build M=/root/rtl8192cu-fixes  modules
make[1]: Verzeichnis „/usr/src/linux-headers-5.10.43-sunxi“ wird betreten
  CC [M]  /root/rtl8192cu-fixes/core/rtw_cmd.o
  CC [M]  /root/rtl8192cu-fixes/core/rtw_security.o
  CC [M]  /root/rtl8192cu-fixes/core/rtw_debug.o
  CC [M]  /root/rtl8192cu-fixes/core/rtw_io.o
  CC [M]  /root/rtl8192cu-fixes/core/rtw_ioctl_query.o
  CC [M]  /root/rtl8192cu-fixes/core/rtw_ioctl_set.o
  CC [M]  /root/rtl8192cu-fixes/core/rtw_ieee80211.o
  CC [M]  /root/rtl8192cu-fixes/core/rtw_mlme.o
  CC [M]  /root/rtl8192cu-fixes/core/rtw_mlme_ext.o
/root/rtl8192cu-fixes/core/rtw_mlme_ext.c: In function ‘mgt_dispatcher’:
/root/rtl8192cu-fixes/core/rtw_mlme_ext.c:734:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
    if(check_fwstate(pmlmepriv, WIFI_AP_STATE) == _TRUE)
      ^
/root/rtl8192cu-fixes/core/rtw_mlme_ext.c:739:3: note: here
   case WIFI_ASSOCREQ:
   ^~~~
  CC [M]  /root/rtl8192cu-fixes/core/rtw_wlan_util.o
  CC [M]  /root/rtl8192cu-fixes/core/rtw_pwrctrl.o
  CC [M]  /root/rtl8192cu-fixes/core/rtw_rf.o
  CC [M]  /root/rtl8192cu-fixes/core/rtw_recv.o
  CC [M]  /root/rtl8192cu-fixes/core/rtw_sta_mgt.o
  CC [M]  /root/rtl8192cu-fixes/core/rtw_ap.o
  CC [M]  /root/rtl8192cu-fixes/core/rtw_xmit.o
  CC [M]  /root/rtl8192cu-fixes/core/rtw_p2p.o
  CC [M]  /root/rtl8192cu-fixes/core/rtw_tdls.o
  CC [M]  /root/rtl8192cu-fixes/core/rtw_br_ext.o
  CC [M]  /root/rtl8192cu-fixes/core/rtw_iol.o
  CC [M]  /root/rtl8192cu-fixes/core/rtw_sreset.o
  CC [M]  /root/rtl8192cu-fixes/core/efuse/rtw_efuse.o
  CC [M]  /root/rtl8192cu-fixes/hal/hal_intf.o
  CC [M]  /root/rtl8192cu-fixes/hal/hal_com.o
  CC [M]  /root/rtl8192cu-fixes/hal/dm.o
  CC [M]  /root/rtl8192cu-fixes/hal/rtl8192c/rtl8192c_hal_init.o
  CC [M]  /root/rtl8192cu-fixes/hal/rtl8192c/rtl8192c_phycfg.o
/root/rtl8192cu-fixes/hal/rtl8192c/rtl8192c_phycfg.c: In function ‘phy_TxPwrIdxToDbm’:
/root/rtl8192cu-fixes/hal/rtl8192c/rtl8192c_phycfg.c:2365:10: warning: this statement may fall through [-Wimplicit-fallthrough=]
   Offset = -8;
   ~~~~~~~^~~~
/root/rtl8192cu-fixes/hal/rtl8192c/rtl8192c_phycfg.c:2366:2: note: here
  default:
  ^~~~~~~
  CC [M]  /root/rtl8192cu-fixes/hal/rtl8192c/rtl8192c_rf6052.o
  CC [M]  /root/rtl8192cu-fixes/hal/rtl8192c/rtl8192c_dm.o
  CC [M]  /root/rtl8192cu-fixes/hal/rtl8192c/rtl8192c_rxdesc.o
  CC [M]  /root/rtl8192cu-fixes/hal/rtl8192c/rtl8192c_cmd.o
  CC [M]  /root/rtl8192cu-fixes/hal/rtl8192c/usb/usb_halinit.o
/root/rtl8192cu-fixes/hal/rtl8192c/usb/usb_halinit.c: In function ‘GetHwReg8192CU’:
/root/rtl8192cu-fixes/hal/rtl8192c/usb/usb_halinit.c:5694:20: warning: this statement may fall through [-Wimplicit-fallthrough=]
    *((u16 *)(val)) = pHalData->BasicRateSet;
    ~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~
/root/rtl8192cu-fixes/hal/rtl8192c/usb/usb_halinit.c:5695:3: note: here
   case HW_VAR_TXPAUSE:
   ^~~~
  CC [M]  /root/rtl8192cu-fixes/hal/rtl8192c/usb/rtl8192cu_led.o
  CC [M]  /root/rtl8192cu-fixes/hal/rtl8192c/usb/rtl8192cu_xmit.o
  CC [M]  /root/rtl8192cu-fixes/hal/rtl8192c/usb/rtl8192cu_recv.o
  CC [M]  /root/rtl8192cu-fixes/hal/rtl8192c/usb/usb_ops_linux.o
  CC [M]  /root/rtl8192cu-fixes/hal/rtl8192c/rtl8192c_sreset.o
  CC [M]  /root/rtl8192cu-fixes/hal/rtl8192c/rtl8192c_xmit.o
  CC [M]  /root/rtl8192cu-fixes/hal/rtl8192c/usb/Hal8192CUHWImg.o
  CC [M]  /root/rtl8192cu-fixes/os_dep/osdep_service.o
  CC [M]  /root/rtl8192cu-fixes/os_dep/linux/os_intfs.o
  CC [M]  /root/rtl8192cu-fixes/os_dep/linux/usb_intf.o
  CC [M]  /root/rtl8192cu-fixes/os_dep/linux/usb_ops_linux.o
  CC [M]  /root/rtl8192cu-fixes/os_dep/linux/ioctl_linux.o
/root/rtl8192cu-fixes/os_dep/linux/ioctl_linux.c: In function ‘set_group_key’:
/root/rtl8192cu-fixes/os_dep/linux/ioctl_linux.c:7384:11: warning: this statement may fall through [-Wimplicit-fallthrough=]
    keylen = 16;
    ~~~~~~~^~~~
/root/rtl8192cu-fixes/os_dep/linux/ioctl_linux.c:7385:3: note: here
   default:
   ^~~~~~~
  CC [M]  /root/rtl8192cu-fixes/os_dep/linux/xmit_linux.o
  CC [M]  /root/rtl8192cu-fixes/os_dep/linux/mlme_linux.o
  CC [M]  /root/rtl8192cu-fixes/os_dep/linux/recv_linux.o
  CC [M]  /root/rtl8192cu-fixes/os_dep/linux/ioctl_cfg80211.o
  CC [M]  /root/rtl8192cu-fixes/os_dep/linux/rtw_android.o
  LD [M]  /root/rtl8192cu-fixes/8192cu.o
  MODPOST /root/rtl8192cu-fixes/Module.symvers
  CC [M]  /root/rtl8192cu-fixes/8192cu.mod.o
  LD [M]  /root/rtl8192cu-fixes/8192cu.ko
make[1]: Verzeichnis „/usr/src/linux-headers-5.10.43-sunxi“ wird verlassen
root@bananapi:~/rtl8192cu-fixes#

 

dmesg out:

Spoiler

[   12.071053] usbcore: registered new interface driver rtl8192cu
[   12.114133] systemd[1]: Starting Load/Save RF Kill Switch Status...
[   12.118443] rtl8192cu 3-1:1.0 wlx74da387ed9f9: renamed from wlan0
[   12.188176] input: Logitech K330 as /devices/platform/soc/1c14400.usb/usb4/4-1/4-1:1.2/0003:046D:C52B.0003/0003:046D:4016.0005/input/input22
[   12.194284] logitech-hidpp-device 0003:046D:4016.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K330] on usb-1c14400.usb-1/input2:2
[   12.203607] systemd[1]: Started Load/Save RF Kill Switch Status.

[   12.228655] input: Logitech M215 2nd Gen as /devices/platform/soc/1c14400.usb/usb4/4-1/4-1:1.2/0003:046D:C52B.0003/0003:046D:401B.0006/input/input23
[   12.232484] logitech-hidpp-device 0003:046D:401B.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech M215 2nd Gen] on usb-1c14400.usb-1/input2:3
[   14.138414] systemd[1]: Started Armbian ZRAM config.
[   14.319923] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard
[   14.319989] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff)
[   17.212735] systemd[1]: systemd-rfkill.service: Succeeded.
[   18.926637] systemd[1]: Started Armbian memory supported logging.
[   18.949826] systemd[1]: Starting Journal Service...
[   19.349752] systemd[1]: Started Journal Service.
[   19.480825] systemd-journald[539]: Received request to flush runtime journal from PID 1
[   20.554084] random: crng init done
[   20.554099] random: 7 urandom warning(s) missed due to ratelimiting
[   27.031269] sun7i-dwmac 1c50000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=POLL)
[   27.035080] sun7i-dwmac 1c50000.ethernet eth0: No Safety Features support found
[   27.035112] sun7i-dwmac 1c50000.ethernet eth0: RX IPC Checksum Offload disabled
[   27.035128] sun7i-dwmac 1c50000.ethernet eth0: No MAC Management Counters available
[   27.035140] sun7i-dwmac 1c50000.ethernet eth0: PTP not supported by HW
[   27.042235] sun7i-dwmac 1c50000.ethernet eth0: configuring for phy/rgmii-id link mode
[   27.350402] rtl8192cu: MAC auto ON okay!
[   27.389895] rtl8192cu: Tx queue select: 0x05
[   28.594389] rtl8192c_common: Polling FW ready fail! REG_MCUFWDL:0x00030006.
[   28.594406] rtl8192c_common: Firmware is not ready to run!
[   33.770751] vcc3v0: disabling
[   33.770778] vcc5v0: disabling
[   33.770907] usb0-vbus: disabling

 

root@bananapi:~/rtl8192cu-fixes# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

tun0      no wireless extensions.

wlx74da387ed9f9  IEEE 802.11  ESSID:off/any
          Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm
          Retry short limit:7   RTS thr=2347 B   Fragment thr:off
          Encryption key:off
          Power Management:off

 

At this point, as a newbie, I have to give up and ask the community what I've done wrong and how to fix the mess. I attach the original Linux driver source, found the driver cd, which came along with the adapter.

rtl8188C_8192C_usb_linux_v4.0.2_9000.20130911.tar.gz

Link to comment
Share on other sites

5 hours ago, Elric said:

Bus 003 Device 003: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS]
noticed having a RTL8188CUS, so the I should be fine with RTL8192C driver.

Then I unplugged the device and followed the instructions given in https://docs.armbian.com/User-Guide_Advanced-Features/

 

but WHY do you want to compile the WiFi-Driver when already a working one is included in armbian?

The EW-7811Un is one of my oldest WiFi-Dongles from the beginning of the Raspberry Pi 1 Area, because it was one of the first working Donges on a RPi1

 

When I do insert my Edimax - I get it listed in lsusb, get the firmware loaded in dmesg and do get a new wlan-device (wlan0/wlan1 depending on the SBC) which is normally useable:
 

lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


dmesg
[234675.296067] usb 1-1: new high-speed USB device number 2 using ehci-platform
[234675.458033] usb 1-1: New USB device found, idVendor=7392, idProduct=7811, bcdDevice= 2.00
[234675.458084] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[234675.458099] usb 1-1: Product: 802.11n WLAN Adapter
[234675.458112] usb 1-1: Manufacturer: Realtek
[234675.458124] usb 1-1: SerialNumber: 00e04c000001
[234675.612830] rtl8192cu: Chip version 0x10
[234675.719057] rtl8192cu: Board Type 0
[234675.719387] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[234675.719571] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[234675.719739] ieee80211 phy1: Selected rate control algorithm 'rtl_rc'
[234675.723064] usbcore: registered new interface driver rtl8192cu
[234675.755713] usbcore: registered new interface driver rtl8xxxu
[234675.816426] rtl8192cu: MAC auto ON okay!
[234675.855924] rtl8192cu: Tx queue select: 0x05

ifconfig
wlan1: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 74:da:38:0e:3c:1a  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

 

Link to comment
Share on other sites

@guidolThank you once again for reading and answering. Since the problem "receiver" booting problem, I have 3 different sdcards in use (all 5.10.43), 2 Buster trying setting something up like an "VPN Access Point" and 1 focal for testing desktop environments and XRDP. With your kindly provided output of your lsusb and dmesg I started today the "focal" sdcard. Nothing else is installed on focal, just plain OS, no openvpn and no further experiments. Here is the output of my "focal" with plugged-in Edimax.

 

root@deskpi:/# lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS]
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

 

root@deskpi:/# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

wlx74da387ed9f9  IEEE 802.11  ESSID:off/any
          Mode:Managed  Access Point: Not-Associated   Tx-Power=20 dBm
          Retry short limit:7   RTS thr=2347 B   Fragment thr:off
          Encryption key:off
          Power Management:off

 

Here is dmesg output:
 

Spoiler

[   13.141847] usb 3-1: new high-speed USB device number 2 using ehci-platform
[   13.303056] usb 3-1: New USB device found, idVendor=7392, idProduct=7811, bcdDevice= 2.00
[   13.303077] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   13.303086] usb 3-1: Product: 802.11n WLAN Adapter
[   13.303094] usb 3-1: Manufacturer: Realtek
[   13.303102] usb 3-1: SerialNumber: 00e04c000001

.

.

[   15.322158] rtl8192cu: Chip version 0x10
[   15.527019] rtl8192cu: Board Type 0
[   15.527231] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[   15.527336] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[   15.527599] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   15.534999] usbcore: registered new interface driver rtl8192cu

.

.

[   15.605618] rtl8192cu 3-1:1.0 wlx74da387ed9f9: renamed from wlan0

.

[   35.966781] rtl8192cu: MAC auto ON okay!
[   36.022861] rtl8192cu: Tx queue select: 0x05

.

.

[  195.894507] usb 3-1: USB disconnect, device number 2
[  195.911928] rtl_usb: reg 0x102, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x83040000
[  195.927650] rtl_usb: reg 0x422, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x0
[  195.942754] rtl_usb: reg 0x542, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x4d5
[  195.958170] rtl_usb: reg 0x102, usbctrl_vendorreq TimeOut! status:0xffffffed value=0x390282a
[  198.811368] usb 4-1: USB disconnect, device number 2
[  213.225127] usb 2-1: new high-speed USB device number 3 using ehci-platform
[  213.462247] usb 2-1: New USB device found, idVendor=7392, idProduct=7811, bcdDevice= 2.00
[  213.462261] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  213.462270] usb 2-1: Product: 802.11n WLAN Adapter
[  213.462277] usb 2-1: Manufacturer: Realtek
[  213.462285] usb 2-1: SerialNumber: 00e04c000001
[  213.463805] rtl8192cu: Chip version 0x10
[  213.562136] rtl8192cu: Board Type 0
[  213.562352] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[  213.562472] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[  213.562570] ieee80211 phy1: Selected rate control algorithm 'rtl_rc'
[  213.657825] rtl8192cu 2-1:1.0 wlx74da387ed9f9: renamed from wlan0
[  213.874987] rtl8192cu: MAC auto ON okay!
[  213.910881] rtl8192cu: Tx queue select: 0x05

 

 

On this point in "Buster" image, I decided to compile wlan driver:D, following the given advice in the HOW-TO. Even the example driver is the one I need....
I hope this answers your question, WHY I recompiled the driver. I'm a newbie, but not such a newbie, that "wlx74da387ed9f9" could be a valid network name.

Link to comment
Share on other sites

  • Solution
21 minutes ago, Elric said:

[  213.657825] rtl8192cu 2-1:1.0 wlx74da387ed9f9: renamed from wlan0

 

21 minutes ago, Elric said:

could be a valid network name.

 

In fact it is. Starting with v197 systemd:
https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/7/html/networking_guide/sec-understanding_the_predictable_network_interface_device_names

 

Link to comment
Share on other sites

21 minutes ago, Elric said:

Recompiling was useless.


Also for other reason. We keep well known and those a bit less known wireless drivers in best possible shape and bundled with kernels we provide. In theory - users should not need to compile exotic drivers that Linux doesn't support (well enough) on their own, but all dependencies are ready (kernel headers, compilers) - so you can. For things we don't cover, can't bundle (zfs) or for experimenting ...

 

23 minutes ago, Elric said:

So, how it looks like: I am newbie


We all are :rolleyes:

 

It is impossible to know everything, especially in this tech world full of complicated details.

Link to comment
Share on other sites

This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines