Jump to content

build rpi-rtl8812au?


kangz543g

Recommended Posts

install https://github.com/emmercm/rpi-rtl8812au

 

error?

$ sudo make
make ARCH=arm CROSS_COMPILE= -C /lib/modules/5.10.60-sunxi/build M=/sr/src/rtl8812au-f1bd10b  modules
make[1]: Entering directory '/usr/lib/modules/5.10.60-sunxi/build'
make[1]: *** No rule to make target 'modules'.  Stop.
make[1]: Leaving directory '/usr/lib/modules/5.10.60-sunxi/build'
make: *** [Makefile:1086: modules] Error 2
 

Link to comment
Share on other sites

Moved to Common issues / peer to peer technical support

Duplicate topic has been deleted since it would have been an invalid issue report anyways and posting the same issue in multiple places is considered abusive behavior.

 

Link to comment
Share on other sites

2 hours ago, kangz543g said:

install https://github.com/emmercm/rpi-rtl8812au

 

error?

$ sudo make
make ARCH=arm CROSS_COMPILE= -C /lib/modules/5.10.60-sunxi/build M=/sr/src/rtl8812au-f1bd10b  modules
 

Hi,

The M=/sr/src/... looks wrong to me.  Shouldn't it be M=/usr/src/...  ?

 

Update: I think that this make has to be done on the system that built the kernel.  This was the case with the old Realtek drivers I built for RPi kernels.  The make needs a valid "build" softlink in the modules directory.  This softlink is only valid where the modules were created.

 

Cheers,

Steven

Edited by phelum
More details
Link to comment
Share on other sites

This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines