Jump to content

Orange Pi one two usb host ports possible?


MacBreaker

Recommended Posts

1 hour ago, MacBreaker said:

Ok, wrong question..

Is it possible to use the usb otg port as host post?

 

As I read

http://www.orangepi.org/orangepibbsen/forum.php?mod=viewthread&tid=3399
it seems to be possible.
At the URL is a information how to change the .DTB for the OPi Zero to use the USB-OTG as USB-HOST

 

You have to find the right usb-port (usb@1c19000) in the .DTB/.DTS for the OPi One

 

DTB to DTS decompile

dtc -I dtb -O dts /boot/dtb/sun8i-h3-orangepi-one.dtb -o /boot/dtb/sun8i-h3-orangepi-one.dts

 

EDIT

change in the .DTS:

change the line:
                        dr_mode = "otg";
to                     dr_mode = "host";

in the section

usb@1c19000

 

from:

                usb@1c19000 {
                        compatible = "allwinner,sun8i-h3-musb";
                        reg = <0x1c19000 0x400>;
                        clocks = <0x03 0x20>;
                        resets = <0x03 0x11>;
                        interrupts = <0x00 0x47 0x04>;
                        interrupt-names = "mc";
                        phys = <0x10 0x00>;
                        phy-names = "usb";
                        extcon = <0x10 0x00>;
                        dr_mode = "otg";
                        status = "okay";
                        phandle = <0x48>;
                };

                          
to:
                          
                usb@1c19000 {
                        compatible = "allwinner,sun8i-h3-musb";
                        reg = <0x1c19000 0x400>;
                        clocks = <0x03 0x20>;
                        resets = <0x03 0x11>;
                        interrupts = <0x00 0x47 0x04>;
                        interrupt-names = "mc";
                        phys = <0x10 0x00>;
                        phy-names = "usb";
                        extcon = <0x10 0x00>;
                        dr_mode = "host";
                        status = "okay";
                        phandle = <0x48>;
                };
                          

 

 

DTS to DTB compile

dtc -I dts -O dtb /boot/dtb/sun8i-h3-orangepi-one.dts -o /boot/dtb/sun8i-h3-orangepi-one.dtb

 

then REBOOT

 

As attachment the new compiled version (when you have the same kernel as I 5.15.4 :)

 

@MacBreaker

PS: Liebe Gruesse nach Hessen - vor 6 Jahren habe ich in Babenhausen bei Frankfurt/Darmstadt gewohnt - nun in der Tuerkei....

sun8i-h3-orangepi-one.dtb

Link to comment
Share on other sites

This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines