Rocket69 Posted November 30, 2021 Share Posted November 30, 2021 Armbianmonitor: http://ix.io/3GyJ Hello, I have an ARMBIAN image 08.21.6 kernel 5.10.16 it works very well on rockpi 4B + rev 1.6 I tested the last Kernel but without more success. when we fix the ip address and we up (several times) the eth0 network this one puts to work at a time. Do you have an idea ? Regards. 0 Quote Link to comment Share on other sites More sharing options...
arox Posted November 30, 2021 Share Posted November 30, 2021 Does-it start if you unplug/replug the RJ45 connector (as on RPI...) 0 Quote Link to comment Share on other sites More sharing options...
dvd741 Posted January 3, 2022 Share Posted January 3, 2022 I have some issues with the ethernet adapter on my Rock Pi 4B+ (v1.72) Connections seem to drop, sometimes Ping loses a packet. APT-GET UPDATE doesn't work.. Waiting For headers / Speed to low and constantly dropping -> Timeout On Wi-Fi everything seems to work, but for stability I'd ofcourse like the ethernet to work... IPERF3 Tests run successfull. (Server on LAN) PING drops 1 packet in the sequence then seems to run fine for a while (LAN) DMESG (Maybe this gives more information?): [ 7.997847] panfrost ff9a0000.gpu: mali-t860 id 0x860 major 0x2 minor 0x0 status 0x0 [ 7.997855] panfrost ff9a0000.gpu: features: 00000000,100e77bf, issues: 00000000,24040400 [ 7.997860] panfrost ff9a0000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7 [ 7.997864] panfrost ff9a0000.gpu: shader_present=0xf l2_present=0x1 [ 7.999104] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9 [ 8.000699] usbcore: registered new interface driver brcmfmac [ 8.009791] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43456-sdio.radxa,rockpi4b.txt failed with error -2 [ 8.012675] [drm] Initialized panfrost 1.1.0 20180908 for ff9a0000.gpu on minor 1 [ 8.013029] hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned. [ 8.020903] hantro-vpu ff650000.video-codec: Adding to iommu group 0 [ 8.021991] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-enc as /dev/video2 [ 8.022409] hantro-vpu ff650000.video-codec: registered rockchip,rk3399-vpu-dec as /dev/video3 [ 8.076933] Bluetooth: Core ver 2.22 [ 8.077056] NET: Registered protocol family 31 [ 8.077062] Bluetooth: HCI device and connection manager initialized [ 8.077082] Bluetooth: HCI socket layer initialized [ 8.077092] Bluetooth: L2CAP socket layer initialized [ 8.077117] Bluetooth: SCO socket layer initialized [ 8.133709] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9 [ 8.134711] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available [ 8.136106] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/9 wl0: Feb 11 2020 11:54:51 version 7.45.96.61 (be7af2d@shgit) (r745790) FWID 01-a41d86bd es7.c5.n4.a3 [ 8.410774] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=POLL) [ 8.410823] cma: cma_alloc: alloc failed, req-size: 2 pages, ret: -12 [ 8.411449] cma: cma_alloc: alloc failed, req-size: 2 pages, ret: -12 [ 8.413101] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found [ 8.413118] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW [ 8.413677] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode [ 9.446580] random: crng init done [ 9.446588] random: 7 urandom warning(s) missed due to ratelimiting [ 12.519689] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx I'm not sure where to look next, maybe someone can help? 0 Quote Link to comment Share on other sites More sharing options...
Igor Posted January 3, 2022 Share Posted January 3, 2022 36 minutes ago, dvd741 said: I'm not sure where to look next I understand your frustration but Armbian have exact same problem. Support generate expenses while there is no income from you or vendor. 52 minutes ago, dvd741 said: maybe someone can help? Raising your problem attention from 0% https://forum.armbian.com/subscriptions/ Instead of putting a pressure to people you owe perhaps trying to solve the problem honest way? Cover 1-2 working days of research and expenses to developers and wait up to 30 days for a available slot that attempt on resolving can be made. https://forum.armbian.com/clients/donations/ Hire someone - which will cost you a lot more and share with others. We don't need this to work - you do: https://docs.armbian.com/Process_Contribute/ Armbian only ... https://forum.radxa.com/t/rock-pi-4b-1-72-ethernet-speed/8284 0 Quote Link to comment Share on other sites More sharing options...
guidol Posted January 3, 2022 Share Posted January 3, 2022 1 hour ago, dvd741 said: [ 8.009791] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac43456-sdio.radxa,rockpi4b.txt failed with error -2 try (and reboot) cp /usr/lib/firmware/brcm/brcmfmac43456-sdio.txt /usr/lib/firmware/brcm/brcmfmac43456-sdio.radxa,rockpi4b.txt 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.