Artur_M Posted March 18, 2022 Share Posted March 18, 2022 After upgrade to Bullseye 5.15.26 I can't enable spi-dev on my board. Previously I used Buster 5.3.9 and everything worked well, after upgrade /dev/spidev0.0 dissappeared. Board is working fine (reinstalled 5.3.9 and SPI working). Is there any trick which need to be made to enable it ? armbianmonitor.txt 0 Quote Link to comment Share on other sites More sharing options...
Javier Vela Posted March 21, 2022 Share Posted March 21, 2022 Hello, I am also having a problem with spidev. I am using Banana-pi-m2-zero with ARMBIAN based Ubuntu Focal. I can't enable spi-dev. I have write in armbiancomfig.txt the following: overlays=cpu-clock-1.3GHz-1.3v i2c0 spi-spidev param_spidev_spi_bus=0 param_spidev_spi_cs=0 Checking the kernel logs with "dmesg | grep spidev" no show relevant info. Reading other posts: Do I have to change sun8i-h3-spi-spidev.dtbo? I have seen similar problem with this processor:https://archlinuxarm.org/forum/viewtopic.php?f=60&t=15395 0 Quote Link to comment Share on other sites More sharing options...
Javier Vela Posted March 22, 2022 Share Posted March 22, 2022 U-Boot 2021.10-armbian (Nov 05 2021 - 13:19:06 -0600) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Banana Pi BPI-M2-Zero DRAM: 512 MiB MMC: mmc@1c0f000: 0, mmc@1c10000: 2 Loading Environment from FAT... Unable to use mmc 0:1... In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Net: No ethernet found. Autoboot in 1 seconds, press <Space> to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3964 bytes read in 4 ms (967.8 KiB/s) ## Executing script at 43100000 U-boot loaded from SD Boot script loaded from mmc 352 bytes read in 4 ms (85.9 KiB/s) 10388878 bytes read in 440 ms (22.5 MiB/s) 8303240 bytes read in 351 ms (22.6 MiB/s) Found mainline kernel configuration 34107 bytes read in 11 ms (3 MiB/s) 478 bytes read in 9 ms (51.8 KiB/s) Applying kernel provided DT overlay sun8i-h3-cpu-clock-1.2GHz-1.3v.dtbo 374 bytes read in 10 ms (36.1 KiB/s) Applying kernel provided DT overlay sun8i-h3-i2c0.dtbo 788 bytes read in 10 ms (76.2 KiB/s) Applying kernel provided DT overlay sun8i-h3-spi-spidev.dtbo 502 bytes read in 10 ms (48.8 KiB/s) Applying kernel provided DT overlay sun8i-h3-uart1.dtbo 502 bytes read in 10 ms (48.8 KiB/s) Applying kernel provided DT overlay sun8i-h3-uart2.dtbo 502 bytes read in 10 ms (48.8 KiB/s) Applying kernel provided DT overlay sun8i-h3-uart3.dtbo 504 bytes read in 10 ms (48.8 KiB/s) Applying kernel provided DT overlay sun8i-h3-usbhost0.dtbo 504 bytes read in 10 ms (48.8 KiB/s) Applying kernel provided DT overlay sun8i-h3-usbhost1.dtbo 504 bytes read in 10 ms (48.8 KiB/s) Applying kernel provided DT overlay sun8i-h3-usbhost2.dtbo 504 bytes read in 10 ms (48.8 KiB/s) Applying kernel provided DT overlay sun8i-h3-usbhost3.dtbo 4185 bytes read in 11 ms (371.1 KiB/s) Applying kernel provided DT fixup script (sun8i-h3-fixup.scr) ## Executing script at 45000000 Kernel image @ 0x42000000 [ 0x000000 - 0x7eb288 ] ## Loading init Ramdisk from Legacy Image at 43400000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 10388814 Bytes = 9.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Ramdisk to 49617000, end 49fff54e ... OK Loading Device Tree to 495a6000, end 49616fff ... OK Starting kernel ... 0 Quote Link to comment Share on other sites More sharing options...
kaup Posted April 11, 2022 Share Posted April 11, 2022 I have the same problem with spidev on Orange Pi Zero. I tryed to use Armbian_22.02.1_Orangepizero_focal_current_5.15.25 and it didn't work. To make it work I had to use version of Armbian_21.08.1_Orangepizero_focal_current_5.10.60 without upgrade 0 Quote Link to comment Share on other sites More sharing options...
Werner Posted April 11, 2022 Share Posted April 11, 2022 Moved to P2P help. Quote 22.05.0-trunk.0004 Unofficial/user built image/packages 0 Quote Link to comment Share on other sites More sharing options...
nullzed Posted May 24, 2022 Share Posted May 24, 2022 On 4/11/2022 at 8:13 PM, kaup said: I have the same problem with spidev on Orange Pi Zero. I tryed to use Armbian_22.02.1_Orangepizero_focal_current_5.15.25 and it didn't work. To make it work I had to use version of Armbian_21.08.1_Orangepizero_focal_current_5.10.60 without upgrade I god the same problem,but I have no Armbian_21.08.1_Orangepizero_focal_current_5.10.60 image, and noway to download it, can you give me one? 0 Quote Link to comment Share on other sites More sharing options...
Igor Posted May 24, 2022 Share Posted May 24, 2022 2 hours ago, nullzed said: can you give me one? Wait for release or build from sources. 0 Quote Link to comment Share on other sites More sharing options...
3735943886 Posted May 25, 2022 Share Posted May 25, 2022 22 hours ago, nullzed said: I god the same problem,but I have no Armbian_21.08.1_Orangepizero_focal_current_5.10.60 image, and noway to download it, can you give me one? Try downgrade kernel version via armbian-config. My board(not orangepi tho) also had a kernel issue and it was gone after downgrade kernel version to 5.10 0 Quote Link to comment Share on other sites More sharing options...
Igor Posted May 25, 2022 Share Posted May 25, 2022 2 hours ago, 3735943886 said: My board(not orangepi tho) also had a kernel issue and it was gone after downgrade kernel version to 5.10 This problem was fixed but hasn't been released yet. Once it will be, there won't be any need for searching and switching to older kernels, where this function was still working. 0 Quote Link to comment Share on other sites More sharing options...
nullzed Posted May 29, 2022 Share Posted May 29, 2022 On 5/25/2022 at 4:43 PM, Igor said: This problem was fixed but hasn't been released yet. Once it will be, there won't be any need for searching and switching to older kernels, where this function was still working. That's great, but my opi zero just broken today😭 I want to buy a new one,but it's too expensive right this time. I have to wait sometime after it price reduction. maybe when I habe a new board,I can get the new armbian image with new kernal fixed this problem.😅 thanks for tall me this message!😃 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.