RayChang Posted March 29, 2022 Share Posted March 29, 2022 Just tried the latest image for Orangepi Zero2, the Armbian Focal Image(Armbian_22.02.2_Orangepizero2_focal_edge_5.16.11.img Built March 7 2022) The board has startup issue, the serial output seems to load some files in wrong format: U-Boot SPL 2021.10-armbian (Feb 26 2022 - 17:45:38 +0000) DRAM: 1024 MiB Trying to boot from MMC1 NOTICE: BL31: v2.6(debug):510155aa-dirty NOTICE: BL31: Built : 17:45:34, Feb 26 2022 NOTICE: BL31: Detected Allwinner H616 SoC (1823) NOTICE: BL31: Found U-Boot DTB at 0x4a082570, model: OrangePi Zero2 INFO: ARM GICv2 driver initialized INFO: Configuring SPC Controller INFO: PMIC: Probing AXP305 on RSB INFO: PMIC: aldo1 voltage: 3.300V INFO: PMIC: aldo2 voltage: 3.300V INFO: PMIC: aldo3 voltage: 3.300V INFO: PMIC: bldo1 voltage: 1.800V INFO: PMIC: dcdcd voltage: 1.500V INFO: PMIC: dcdce voltage: 3.300V INFO: Changed devicetree to reserve BL31 memory. INFO: BL31: Platform setup done INFO: BL31: Initializing runtime services INFO: BL31: cortex_a53: CPU workaround for 855873 was applied INFO: BL31: cortex_a53: CPU workaround for 1530924 was applied INFO: PSCI: Suspend is unavailable INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x4a000000 INFO: SPSR = 0x3c9 U-Boot 2021.10-armbian (Feb 26 2022 - 17:45:38 +0000) Allwinner Technology CPU: Allwinner H616 (SUN50I) Model: OrangePi Zero2 I2C: ready DRAM: 1 GiB MMC: mmc@4020000: 0 Loading Environment from FAT... Unable to use mmc 0:1... In: serial@5000000 Out: serial@5000000 Err: serial@5000000 Net: phy interface7 eth0: ethernet@5020000 Autoboot in 1 seconds, press <Space> to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 2612 bytes read in 2 ms (1.2 MiB/s) ## Executing script at 4fc00000 U-boot loaded from SD Boot script loaded from mmc 131 bytes read in 1 ms (127.9 KiB/s) No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! 12522800 bytes read in 518 ms (23.1 MiB/s) Failed to load '/boot/uImage' Wrong Image Format for bootm command ERROR: can't get kernel image! SCRIPT FAILED: continuing... libfdt fdt_check_header(): FDT_ERR_BADMAGIC Scanning disk mmc@4020000.blk... Found 2 disks No EFI system partition BootOrder not defined EFI boot manager: Cannot load any image ethernet@5020000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! missing environment variable: pxeuuid missing environment variable: bootfile Retrieving file: pxelinux.cfg/01-02-00-86-a3-61-86 ethernet@5020000 Waiting for PHY auto negotiation to complete......... TIMEOUT ! missing environment variable: bootfile Retrieving file: pxelinux.cfg/00000000 ethernet@5020000 Waiting for PHY auto negotiation to complete.. I tried another image: Armbian_22.02.2_Orangepizero2_focal_legacy_4.9.255.img.xz This one works okay 0 Quote Link to comment Share on other sites More sharing options...
Werner Posted March 29, 2022 Share Posted March 29, 2022 edge (unsupported anyways) is known to be broken due to lack of support for H616 SoC upstream. legacy uses patched vendor sources. 0 Quote Link to comment Share on other sites More sharing options...
mattdebauge Posted December 29, 2023 Share Posted December 29, 2023 I bought OrangePi Zero 2w month ago (newest board similar size to Raspberry Pi Zero 2w) and have 4GB ram built in. I downloaded OrangePi OS (Arch) image and installed it. Booted up just fine but the issue is that it seem Software Repository and Pacman software repository is broken. Cannot update to current and unable to download some software such as Widevine, nala ect. I wanted to be able to use up to date programs ect so I can turn it to mini desktop or as a Kiosk ect. it will not connect to Arch server. I also installed Debian as well and it would not connect to USA Debian server (It only 'locked' to Shanghai server even I rooted and tried to change it but it revert back to that server). Is it because it's brand new and still working on it or restricted for now? 0 Quote Link to comment Share on other sites More sharing options...
Werner Posted December 29, 2023 Share Posted December 29, 2023 Use genuine Armbian and try again. We cannot provide support for 3rd party/vendor images. What Gunjan says below 0 Quote Link to comment Share on other sites More sharing options...
Gunjan Gupta Posted December 29, 2023 Share Posted December 29, 2023 1 hour ago, Werner said: Use genuine Armbian and try again. We cannot provide support for 3rd party/vendor images. Looks like you misread the board name posted by mattdebauge. We currently have no support Orange Pi Zero 2w right now. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.