orangey Posted April 21, 2022 Share Posted April 21, 2022 Hey all, So recently I got myself an Orange Pi Prime so I could attempt to do some SPI flashing through spidev and flashrom. I have been going at it, set up the board, got an actually decent power supply, and set up everything. Eventually I got myself into the steps of setting up the pins for spi use. At first, I used armbian-config to enable the spidev into /boot/armbianEnv.txt then I added param_spidev_spi_bus=0 into armbianEnv.txt I rebooted and the spi device file still doesn't show up, any ideas? I have: went through armbian-config (System -> Hardware -> spi-spidev) added param_spidev_spi_bus=0 to armbianEnv.txt I even decided to read up on dtb files and dts overlays and decompiled my sun50i-h5-spi-spidev.dtbo file manually went ahead and "enabled" the spi devices by editing the dtbo file, recomplied it, and moved them into /boot/dtb/allwinner/overlays/sun50i-h5-spi-spidev.dtbo nothing. thank you for your time. armbianEnv.txt 0 Quote Link to comment Share on other sites More sharing options...
Werner Posted April 22, 2022 Share Posted April 22, 2022 Providing logs with armbianmonitor -u helps with troubleshooting and significantly raises chances that issue gets addressed. 0 Quote Link to comment Share on other sites More sharing options...
orangey Posted April 22, 2022 Author Share Posted April 22, 2022 10 hours ago, Werner said: Providing logs with armbianmonitor -u helps with troubleshooting and significantly raises chances that issue gets addressed. I honestly have no idea how the pastebin/ghostbin stuff works, but here goes: https://ghostbin.com/LSQZy Please let me know if this is good. Thank you. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.