dnm2dnm Posted September 20, 2016 Share Posted September 20, 2016 How to "Enable switch user and Login Welcome in gui?" Link to comment Share on other sites More sharing options...
manuti Posted September 20, 2016 Share Posted September 20, 2016 Remove nodm login and add by example lightdm: sudo apt-get remove nodm sudo apt-get -y install lightdm sudo reboot Link to comment Share on other sites More sharing options...
dnm2dnm Posted September 20, 2016 Author Share Posted September 20, 2016 Thanks, what about "Switch User" ? "Lock Screen" is not working also... Link to comment Share on other sites More sharing options...
Vincent Tham Posted September 19, 2017 Share Posted September 19, 2017 I'm also interested to get the login screen working, but the post above with apt-get remove nodm and apt-get -y install lightdm, then reboot. But did not work, all I get after reboot is login prompt, and after login have to manually issue startx command. Link to comment Share on other sites More sharing options...
Igor Posted September 20, 2017 Share Posted September 20, 2017 We are not clairvoyant or mind readers Please describe your setup as best as possible so we know what your operating environment is like. 1. Logs, when you can boot the board: armbianmonitor -u (paste URL to your forum post) 2. If your board does not boot, provide a log from serial console or at least make and attach a picture, where it stops. 3. Describe the problem the best you can and provide all necessary info that we can reproduce the problem. Link to comment Share on other sites More sharing options...
Recommended Posts