Access ssh from LAN

[Hayotbek Xasanboyev]

 

Sorry for my stupid question.

If I connect by TTL to USB adapter, after setting up login/password, terminal is freezing. Board is Nanopi NOE2.

I think this is due to the fact that my adapter is warm or not of poor quality. While I order a new one, is there a way to enable ssh access over the lan network?

[Werner]

SSH is enabled oob on all Armbian images. When connecting to a wired network it will look for a dhcp server and aquire a lease.

Check your dhcp (usually your router) interface to know the IP address.

[Hayotbek Xasanboyev]

1 минуту назад, Werner сказал:

SSH is enabled oob on all Armbian images. When connecting to a wired network it will look for a dhcp server and aquire a lease.

Check your dhcp (usually your router) interface to know the IP address.

I already set static ip for my board. But on Kitty I get connection error. Later I send error screen.

[Werner]

So probably misconfiguration.

 

Other solution would be to simply remove the SD card from the board and mount it on a random lijux machine and edit the network config there.