ice Posted July 9, 2022 Share Posted July 9, 2022 Hi All, I am a total newbie in orange pi and ambian. I just want to use orange pi one as my pi hole server. i use sandisk ultra pro 32G a a huawei 2A power block using usb to barrel connector. After my first install, and try to ssh, the port 22 timed out in armbian I also tried reflashing to debian, and still cannot ssh. I already tried some suggestion i found like dpkg-reconfigure openssh-server, changing time out of ssh. i tried armbianmonitor -u, but im getting a Network/Firewall problem detected. you think this might be related to ssh connection. thanks! 0 Quote Link to comment Share on other sites More sharing options...
CryBaby Posted July 9, 2022 Share Posted July 9, 2022 Can you ping it? What does ssh -v say? 0 Quote Link to comment Share on other sites More sharing options...
ice Posted July 10, 2022 Author Share Posted July 10, 2022 22 hours ago, CryBaby said: Can you ping it? What does ssh -v say? OpenSSH_for_Windows_8.1p1, LibreSSL 3.0.2 debug1: Connecting to 192.168.254.128 [192.168.254.128] port 22. debug1: connect to address 192.168.254.128 port 22: Connection timed out ssh: connect to host 192.168.254.128 port 22: Connection timed out C:\WINDOWS\system32>ping 192.168.254.128 Pinging 192.168.254.128 with 32 bytes of data: Reply from 192.168.254.107: Destination host unreachable. Reply from 192.168.254.107: Destination host unreachable. Reply from 192.168.254.107: Destination host unreachable. Reply from 192.168.254.107: Destination host unreachable. Ping statistics for 192.168.254.128: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), i also ssh the orange pi one within itself, orange can ssh itself tried changing port 22 to 80, 95 and 55555, still my pc cant ssh the orange pi one. here is the output of my monitor armbianmonitorpart1 armbianmonitorpart2 0 Quote Link to comment Share on other sites More sharing options...
Myron Posted July 10, 2022 Share Posted July 10, 2022 What sub-net are you using? I'm assuming it's 255.255.255.0 0 Quote Link to comment Share on other sites More sharing options...
CryBaby Posted July 10, 2022 Share Posted July 10, 2022 8 hours ago, ice said: Reply from 192.168.254.107: Destination host unreachable. You need to fix your network. Probably then ssh will work. 0 Quote Link to comment Share on other sites More sharing options...
Myron Posted July 12, 2022 Share Posted July 12, 2022 Yep. From your diagnostic logs: 793 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 794 link/ether 02:81:6e:ea:b6:35 brd ff:ff:ff:ff:ff:ff 2072 [ 25.939521] dwmac-sun8i 1c30000.ethernet eth0: PHY [0.1:01] driver [Generic PHY] (irq=POLL) 2073 [ 25.947754] dwmac-sun8i 1c30000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0 2074 [ 25.949767] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found 2075 [ 25.949785] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available 2076 [ 25.949798] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW 2077 [ 25.955635] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/mii link mode 2078 [ 25.969182] dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx 2079 [ 25.969259] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready This needs to be sorted out first. Try this command to try enable eth0 /sbin/ifconfig eth0 up 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.