Jump to content

Khadas VIM2 & 3 bugs


NicoD

Recommended Posts

Hi guys.
I'm the maintainer for the Khadas VIM3.
There are 2 small issue's with the Armbian images for VIM3, and also for VIM2.

armbianmonitor -u
http://ix.io/46L9

First off, the VIM3 has all its cores clocked to 1.5Ghz by default.
I created a Jira for that a while ago. https://armbian.atlassian.net/browse/AR-1094

My simple fix is in /etc/default/cpufrequtils
 

MAX_SPEED=15xxxxxxx → MAX_SPEED=2400000


But I have no idea how/where to adjust this so it is correct for all VIM3 images.

Then for VIM2 and VIM3 (maybe VIM3L and VIM1 too) the HDMI audio isn't working as it should.
https://armbian.atlassian.net/browse/AR-1095

I once was able to make it work. But I can't remember how. So the device is enabled at boot, but not directed to be used by pulseaudio.
Thank you.

Link to comment
Share on other sites

40 minutes ago, NicoD said:

First off, the VIM3 has all its cores clocked to 1.5Ghz by default.

 

https://github.com/armbian/build/blob/master/config/sources/families/include/meson64_common.inc#L20

This is the default for Meson64.  No one added the actual top speeds for the Vims apparently

 

https://github.com/armbian/build/blob/master/config/sources/families/meson-g12a.conf#L5

 

is the override for the Meson G12A.  G12B needs something similar in here: https://github.com/armbian/build/blob/master/config/sources/families/meson-g12b.conf

Link to comment
Share on other sites

2 hours ago, Lennyz1988 said:

Hi @NicoD do you know if the NPU is working on the Vim3 using Armbian? I received my Vim3 yesterday so I still have a lot of reading to do.

I've not messed with the NPU, I should, but don't know a good use case.
The things you'll have to read are probably this https://www.khadas.com/post/npu-toolkit-v6-4-0-10-for-vim3---vim3l-released
And this https://forum.khadas.com/t/npu-demo-and-source-code/5938/13
 

Link to comment
Share on other sites

On 8/5/2022 at 11:30 PM, NicoD said:

Then for VIM2 and VIM3 (maybe VIM3L and VIM1 too) the HDMI audio isn't working as it should.

Hi @NicoD

I'm not sure that it's a right solution you've been looking for but it works with my VIM 3 Pro.

See this topic on Khadas forum:

 

Twister OS Armbian 2.01 on VIM3! GL Acceleration Fan and AUDIO - Full HOWTO and Working Image DL

 

The details described in

UPDATE 2:
(In which audio works with correct ALSA configurations)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines