shyeline Posted January 19, 2023 Share Posted January 19, 2023 From the posts that I've read i think i have made the terrible mistake of updating the software via command. It was kinda slow so I did reboot command and the board since than won't start. I've bought the uart adapter and the boot process is as follows: https://pastebin.com/Pz1xb5jc Can i get support? 0 Quote Link to comment Share on other sites More sharing options...
going Posted January 20, 2023 Share Posted January 20, 2023 13 часов назад, shyeline сказал: https://pastebin.com/Pz1xb5jc Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 2669 bytes read in 2 ms (1.3 MiB/s) ## Executing script at 4fc00000 U-boot loaded from SD Boot script loaded from mmc 180 bytes read in 2 ms (87.9 KiB/s) No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! No FDT memory address configured. Please configure the FDT address via "fdt addr <address>" command. Aborting! It looks like you updated the kernel and the dtb, but interrupted the process and the installation did not finish its work. There are no necessary files. Two options: 1) Download a new one and burn the whole image to the sd card. 2) Use an adapter for SD cards. Attach it to a running Linux computer and mount the root partition in /mnt. Then use the chroot command and reinstall the kernel and dtb packages. 0 Quote Link to comment Share on other sites More sharing options...
Solution shyeline Posted January 21, 2023 Author Solution Share Posted January 21, 2023 I've been able to fix it without reinstalling the system with some help from u-boot irc following this, we've made a short version of it https://pastebin.com/8JXQZuXF 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.