Jump to content

Package differences after Cubietruck Trusty->Xenial and 5.20->5.23 upgrade


apollon77

Recommended Posts

Hey,

 

I have one system completely new installed with Armbian Xenial and one system installed with Armbian Trusty (some time ago) and then done Dist-Upgrade.

 

Now after upgrading both from 5.20 to 5.23 I checked the relevant packages and there are differences:

 

Original Xenial system:

root@cubietruck3:~# dpkg -l | egrep "armbian| linux-"
ii  armbian-firmware                  5.22                                     armhf        Linux firmware
ii  armbian-hostapd-xenial            5.14                                     armhf        Patched hostapd for xenial
ii  armbian-tools-xenial              5.22                                     armhf        Armbian tools, temper, Cubie bt utils
ii  linux-base                        4.0ubuntu1                               all          Linux image base package
ii  linux-dtb-next-sunxi              5.23                                     armhf        Linux DTB, version 4.8.4-sunxi
ii  linux-headers-next-sunxi          5.23                                     armhf        Linux kernel headers for 4.8.4-sunxi on armhf
ii  linux-image-next-sunxi            5.23                                     armhf        Linux kernel, version 4.8.4-sunxi
ii  linux-libc-dev:armhf              4.4.0-45.66                              armhf        Linux Kernel Headers for development
ii  linux-u-boot-cubietruck-next      5.23                                     armhf        Uboot loader 2016.09
ii  linux-xenial-root-next-cubietruck 5.23                                     armhf        Armbian tweaks for xenial on cubietruck (next branch)

Upgraded Xenial system:

root@cubietruck2:~# dpkg -l | egrep "armbian| linux-"
ii  armbian-hostapd                   5.13                                     armhf        Patched hostapd
ii  linux-base                        4.0ubuntu1                               all          Linux image base package
ii  linux-dtb-next-sunxi              5.23                                     armhf        Linux DTB, version 4.8.4-sunxi
ii  linux-firmware-image-next-sunxi   5.23                                     armhf        Linux kernel firmware, version 4.8.4-sunxi
ii  linux-headers-next-sunxi          5.23                                     armhf        Linux kernel headers for 4.8.4-sunxi on armhf
ii  linux-image-next-sunxi            5.23                                     armhf        Linux kernel, version 4.8.4-sunxi
ii  linux-libc-dev:armhf              4.4.0-45.66                              armhf        Linux Kernel Headers for development
ii  linux-trusty-root-next-cubietruck 5.20                                     armhf        Armbian tweaks for trusty on cubietruck (next branch)
ii  linux-u-boot-cubietruck-next      5.23                                     armhf        Uboot loader 2016.09

There is still the trusty-root installed and not the xenial one.

How should I fix that?

 

Additionally the hostapd packages are different.

How should I fix that?

 

Thank you for your help here ... I would like to have clean systems as best possible to prevent future problems ...

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines