Jump to content

Cubieboard1 3.4.112-sun4i - U boot error after upgrade to 5.23


maruprez

Recommended Posts

HI,

 

Yesterday night I upgraded from 3.4.112- 5.22 to 5.23

 

Today I made a reboot as login screen suggested.

 

 

xxx@nuc:~$ ssh 192.168.1.50
  ____      _     _      _                         _
 / ___|   _| |__ (_) ___| |__   ___   __ _ _ __ __| |
| |  | | | | '_ \| |/ _ \ '_ \ / _ \ / _` | '__/ _` |
| |__| |_| | |_) | |  __/ |_) | (_) | (_| | | | (_| |
 \____\__,_|_.__/|_|\___|_.__/ \___/ \__,_|_|  \__,_|
                                                     

Welcome to ARMBIAN Debian GNU/Linux 8 (jessie) 3.4.112-sun4i
System load:   0.00                Up time:       1 day        
Memory usage:  8 % of 873Mb      IP:            192.168.1.50
CPU temp:      23°C               
Usage of /:    38% of 3.7G       

Last login: Mon Oct 24 11:50:13 2016 from 192.168.1.22

[ Kernel was updated, please reboot ]
xxx@trumoi:~$ sudo reboot
[sudo] password for xxx
Connection to 192.168.1.50 closed by remote host.
 

 

Next, U-boot error appears.

 

I took an screen photo.

 

 

Thanks a lot

 

Josemari

 

 

 

Link to comment
Share on other sites

Hey, I experience cracshes of my cubietrucks (2x Xenial, 1x Wheezy) with 5.23 Armbian packages ... Can these also be because of newest u-boot?

In most cases yes. Which kernel do you use?

Link to comment
Share on other sites

2x Xenial: Linux cubietruck3 4.8.4-sunxi #6 SMP Sun Oct 23 15:55:47 CEST 2016 armv7l armv7l armv7l GNU/Linux

... and here I had the crashes independent of the package differences on both Cubies (see http://forum.armbian.com/index.php/topic/2692-package-differences-after-cubietruck-trusty-xenial-and-520-523-upgrade/)
... linux-u-boot-cubietruck-next 5.23 is installed

 

1x Wheezy (but here I had crashes before 5.23 ... no since the upgrade): Linux cubietruck 3.4.112-sun7i #10 SMP PREEMPT Sun Oct 23 15:49:51 CEST 2016 armv7l GNU/Linux

... but noticed here that "linux-u-boot-cubietruck" in 5.00 (2016-01) is installed. Can I install "linux-u-boot-cubietruck-next" there too?

 

Before that it was more stable with 5.20 Armbian

Link to comment
Share on other sites

Cubietruck 1 - Wheezy (Legacy kernel) ... currently the "Main" server for my home-automation stuff ... planned to re-setup with Xenial hopefully soon

http://sprunge.us/HaaG

 

Cubietruck 2 - Xenial, original Trusty, upgraded with dist-upgrade to Xenial:

http://sprunge.us/QWGD

 

Cubietruck 3 - Xenial:

http://sprunge.us/gOab

 

Thank you for all your great work&support!

Link to comment
Share on other sites

@maruprez @apollon77

 

I guess you share problems.

 

Our upgrading procedure from very old images is not perfect - that's my first conclusion from those logs.

 

1. Make sure you have this in your sources list or armbian.list

deb http://apt.armbian.com wheezy main utils

Change to jessie, xenial, trusty ... 

 

run apt-get update

 

2. Remove all those packages (dpkg -r name):

ii linux-firmware-image-sun7i 5.23 armhf Linux kernel firmware, version 3.4.112-sun7i
ii linux-headers-3.4.107-cubietruck 3.7 armhf Linux kernel headers for 3.4.107-cubietruck on armhf
ii linux-headers-3.4.108-cubietruck 4.0 armhf Linux kernel headers for 3.4.108-cubietruck on armhf
ii linux-headers-sun7i 5.23 armhf Linux kernel headers for 3.4.112-sun7i on armhf
ii linux-image-3.4.107-cubietruck 3.7 armhf Linux kernel, version 3.4.107-cubietruck
rc linux-image-3.4.108-cubietruck 4.0 armhf Linux kernel, version 3.4.108-cubietruck
ii linux-image-cubietruck 4.1 armhf Linux kernel, version 3.4.108-cubietruck
ii linux-image-sun7i 5.23 armhf Linux kernel, version 3.4.112-sun7i
ii linux-image-sunxi 4.4 armhf Linux kernel, version 3.4.109-sunxi
ii linux-libc-dev:armhf 3.2.82-1 armhf Linux support headers for userspace development
ii linux-u-boot-3.4.107-cubietruck 3.7 all Uboot loader
ii linux-u-boot-3.4.108-cubietruck 4.0 all Uboot loader
ii linux-u-boot-cubietruck 5.00 armhf Uboot loader 2016.01
ii linux-wheezy-root-cubietruck 5.23 armhf Armbian tweaks for wheezy on cubietruck (default branch)

3. Install those, just run under root:

apt-get install linux-wheezy-root-cubietruck linux-u-boot-cubietruck-default linux-image-sun7i linux-headers-sun7i armbian-firmware-full a10disp armbian-tools-jessie sunxi-tools

4. Reboot.

 

Cleaning on other board is similar. Please refer to this page for help with proper naming.

Link to comment
Share on other sites

Hey Igor, is this mainly the advise for my first machine (the Wheezy/Legacy one?) ...

 

Yes.

 

I haven't check others, I guess you got the picture what to fix there if you found some old packages.

Link to comment
Share on other sites

First thank you for the detailed answer!

 

The wheezy computer was not my real problem to be honest. it was stable a long time and that's good and I soon want to move to Xenian also on that Cubietruck.

 

But because of this it was interesting that after the last version of Armbian both Cubietrucks that I had with Xenial (so Nr 2 and 3) crashed 1-2 times ... before that last update with 5.20 they were also quite stable.

 

So the question was more what to do about them to make them stable again? Downgrade to last u-boot?

 

PS: I followed the instructions above on the wheezy system and have the following errors:

On removing:

dpkg: dependency problems prevent removal of linux-libc-dev:armhf:
 libc6-dev:armhf depends on linux-libc-dev.

dpkg: error processing linux-libc-dev:armhf (--remove):
 dependency problems - not removing

on installing

root@cubietruck:~# apt-get install armbian-tools-jessie sunxi-tools
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
 armbian-tools-jessie : Depends: libudev1 but it is not installable
 sunxi-tools : Depends: libusb-1.0-0 (>= 2:1.0.16) but 2:1.0.11-1 is to be installed
E: Unable to correct problems, you have held broken packages.
Link to comment
Share on other sites

Additionally while comparing the both Xenial cubietricks I had "armbian-hostapd  5.13" on one and "armbian-hostapd-xenial 5.14", but both packages do not seems to be existant anymore:

root@cubietruck2:~# apt-get install armbian-hostapd-xenial
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package armbian-hostapd-xenial
root@cubietruck2:~# apt-get install armbian-hostapd
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package armbian-hostapd is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
However the following packages replace it:
  hostapd-realtek hostapd

E: Package 'armbian-hostapd' has no installation candidate

By what they were replaced? I now installed hostapd ... I'm not using Wifi spo far so schould be unimportant :-)

Link to comment
Share on other sites

The problems (at least the dependencies to install the *-tools packages could be solved using wheezy backports, or ?! is that the way to go there?

 

Are those two packages (sunxi-tools and armbian-tools-jessie) important enough for a "normal server user" to start with using backports?!

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines