Jump to content

How to enable SPI


Pentheus

Recommended Posts

Hi im not Linux user not all, can someone point me how to enable SPI ? 

I try this:

 

Enabling SPI

Enable the hardware through config:

sudo armbian-config

switch on SPI in System>Hardware>SPI-spidev & save

Update /etc/modules:

sudo nano /etc/modules

to include the following line:

spi-dev

Update /boot/armbianEnv.txt :

sudo nano /boot/armbianEnv.txt

to include the following:

param_spidev_spi_bus=1 #origianl is 0 but the resonance measurement.py module expects 1 so easier to fix here

param_spidev_max_freq=100000000

The commands to verify the SPI bus should return output like:

$ ls /dev/spi* 

/dev/spidev1.0

$ ls -l /dev/spi*

crw——- 1 root root 153, 0 Aug 25 11:05 /dev/spidev1.0

$ lsmod | grep -i spi

spidev 20480 1

 

But on $ ls /dev/spi* give me 

ls: cannot access '/dev/spi*': No such file or directory

 

dmesg

https://pastebin.com/BNSpyMiL

 

Keep in mind English is not my native language.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines