CAN BUS support orange pi zero
Hi all,
I'm trying to put my orange pi zero to talk with a CAN BUS via mcp2515 chip.
The chip is SPI controlled.
The actual image does not have support for SocketCAN enabled, so I'm compiling the kernel with SocketCan following the kernel configuration shown here
https://developer.ridgerun.com/wiki/index.php/How_to_configure_and_use_CAN_bus
I'm using the cross-compiler tool from the armian website.
After the image is burned to the sdcard and the orange pi zero is booted, I can se
Hello.
I tried to do the same with mcp2515.
Distr : Armbian 5.27.170416 nightly
Kernel : 4.10.3-sun8i
My board: Orange Pi plus 2.
Error:
[ 11.874772] mcp251x spi0.0: Cannot initialize MCP2515. Wrong wiring?
[ 11.885334] mcp251x spi0.0: Probe failed, err=19
Pin connect:
I tried that too
VCC = 5 V
MCP2515<->SPI