Jump to content

Armbian 5.25 on OrangePI PC: The gc2035 video camera doesn't work


IgZero

Recommended Posts

After update from armbian5.23 to armbian5.25 driver for gc2035 not work. The device isn't defined.

=========== Armbian 5.25 ==============
root@orangepipc:~# ls /dev/video*
/dev/video0  /dev/video1
 
Where: /dev/video0 and /dev/video1 - v4l2loopback
 
root@orangepipc:~# cat /etc/modules
#8189es
#rfcomm
#w1-sunxi
#w1-gpio
#w1-therm
gc2035
vfe_v4l2
#sunxi-cir
v4l2loopback
 
root@orangepipc:~# modinfo vfe_v4l2
filename:       /lib/modules/3.4.113-sun8i/kernel/drivers/media/video/sunxi-vfe/vfe_v4l2.ko
description:    Video front end driver for sunxi
license:        Dual BSD/GPL
author:         raymonxiu
depends:        videobuf-core,vfe_os,vfe_subdev,videobuf-dma-contig,cci
intree:         Y
vermagic:       3.4.113-sun8i SMP preempt mod_unload modversions ARMv7 p2v8
parm:           ccm:string
parm:           i2c_addr:uint
parm:           act_name:string
parm:           act_slave:uint
parm:           define_sensor_list:uint
parm:           vfe_i2c_dbg:uint
parm:           isp_log:uint
parm:           vips:uint
root@orangepipc:~# modinfo gc2035
filename:       /lib/modules/3.4.113-sun8i/kernel/drivers/media/video/sunxi-vfe/device/gc2035.ko
license:        GPL
description:    A low-level driver for GalaxyCore gc2035 sensors
author:         @lex
author:         leonardo lontra
author:         raymonxiu
alias:          i2c:gc2035
depends:        cci,vfe_subdev
intree:         Y
vermagic:       3.4.113-sun8i SMP preempt mod_unload modversions ARMv7 p2v8
parm:           hres:hres=0 (640x480|1280x720|1600x1200 - 15 FPS), hres=1 (800x600|1600x1200 - 10 FPS), hres=2 (320x240|640x480|800x600 - 20 FPS), hres=3 (320x240|352x288|640x480 - 15 FPS) (default=0) (uint)
parm:           mclk:mclk override (default=0) (uint)
parm:           frate:frate override (default=0) (uint)
root@orangepipc:~# dmesg | grep GC2035
[    5.938267] [CSI_ERR][GC2035]sensor_read err at sensor_detect!
[    5.938289] [CSI_ERR][GC2035]chip found is not an target chip.
root@orangepipc:~# uname -a
Linux orangepipc 3.4.113-sun8i #28 SMP PREEMPT Thu Feb 2 02:01:28 CET 2017 armv7l armv7l armv7l GNU/Linux
root@orangepipc:~# cat /etc/armbian-release
# PLEASE DO NOT EDIT THIS FILE
BOARD=orangepipc
BOARD_NAME="Orange Pi PC"
VERSION=5.25
LINUXFAMILY=sun8i
BRANCH=default
ARCH=arm
IMAGE_TYPE=stable
 
root@orangepipc:~#
================================
 

Under armbian5.23 the gc2035 driver works. The device is defined.

=========== Armbian 5.23 ==============
root@orangepipc:~# ls /dev/video*
/dev/video0  /dev/video1  /dev/video2
 
Where: /dev/video0 and /dev/video1 - v4l2loopback, /dev/video2 - gc2035
 
root@orangepipc:~# cat /etc/modules
#8189es
#gpio_sunxi
#w1-sunxi
#w1-gpio
#w1-therm
gc2035
vfe_v4l2
#sunxi-cir
v4l2loopback
 
root@orangepipc:~# modinfo vfe_v4l2
filename:       /lib/modules/3.4.112-sun8i/kernel/drivers/media/video/sunxi-vfe/vfe_v4l2.ko
description:    Video front end driver for sunxi
license:        Dual BSD/GPL
author:         raymonxiu
depends:        videobuf-core,vfe_os,vfe_subdev,videobuf-dma-contig,cci
intree:         Y
vermagic:       3.4.112-sun8i SMP preempt mod_unload modversions ARMv7 p2v8
parm:           ccm:string
parm:           i2c_addr:uint
parm:           act_name:string
parm:           act_slave:uint
parm:           define_sensor_list:uint
parm:           vfe_i2c_dbg:uint
parm:           isp_log:uint
parm:           vips:uint
root@orangepipc:~# modinfo gc2035
filename:       /lib/modules/3.4.112-sun8i/kernel/drivers/media/video/sunxi-vfe/device/gc2035.ko
license:        GPL
description:    A low-level driver for GalaxyCore gc2035 sensors
author:         @lex
author:         leonardo lontra
author:         raymonxiu
alias:          i2c:gc2035
depends:        cci,vfe_subdev
intree:         Y
vermagic:       3.4.112-sun8i SMP preempt mod_unload modversions ARMv7 p2v8
parm:           hres:hres=0 (640x480|1280x720|1600x1200 - 15 FPS), hres=1 (800x600|1600x1200 - 10 FPS), hres=2 (320x240|640x480|800x600 - 20 FPS), hres=3 (320x240|352x288|640x480 - 15 FPS) (default=0) (uint)
parm:           mclk:mclk override (default=0) (uint)
parm:           frate:frate override (default=0) (uint)
root@orangepipc:~# dmesg | grep GC2035
[    5.353480] [CSI][GC2035]V4L2_IDENT_SENSOR=2035
[    5.780057] [CSI][GC2035]disalbe oe!
root@orangepipc:~# uname -a
Linux orangepipc 3.4.112-sun8i #10 SMP PREEMPT Sun Oct 23 16:06:55 CEST 2016 armv7l GNU/Linux
root@orangepipc:~# cat /etc/armbian-release
# PLEASE DO NOT EDIT THIS FILE
BOARD=orangepipc
BOARD_NAME="Orange Pi PC"
VERSION=5.23
LINUXFAMILY=sun8i
BRANCH=default
ARCH=arm
 
root@orangepipc:~#
================================
 
P.S.: Settings of parameters in section [csi0] are identical in both versions of the orangepipc.fex file
Link to comment
Share on other sites

twi2 not used

 

[twi2]

twi_used = 0
 
Link to comment
Share on other sites

hmmm, ok.

 

[    5.938267] [CSI_ERR][GC2035]sensor_read err at sensor_detect!

 

Is still a i2c issue, may be i2c has been updated on 5.25?

Please, double check your fex, decompile fex from 5.23 and 5.25 and see if there are other changes.

Link to comment
Share on other sites

hmmm, ok.

 

[    5.938267] [CSI_ERR][GC2035]sensor_read err at sensor_detect!

 

Is still a i2c issue, may be i2c has been updated on 5.25?

Please, double check your fex, decompile fex from 5.23 and 5.25 and see if there are other changes.

Has double-checked orangepipc.fex, hasn't found fundamental differences. The file is attached.
My personal opinion that a problem in the vfe_v4l2 module.
 
When loading the gc2035 module no error messages arise.
 

 

root@orangepipc:~# modprobe gc2035

root@orangepipc:~# dmesg

...SKIP...

[   18.819559] [drm] Initialized mali_drm 2.1.1 20101111 on minor 1
[   20.825372] vmouse_input_dev_open
[   23.340048] eth0: no IPv6 routers present
[   23.867915] Bluetooth: Core ver 2.16
[   23.868004] NET: Registered protocol family 31
[   23.868014] Bluetooth: HCI device and connection manager initialized
[   23.868026] Bluetooth: HCI socket layer initialized
[   23.868036] Bluetooth: L2CAP socket layer initialized
[   23.868062] Bluetooth: SCO socket layer initialized
root@orangepipc:~#
 

 

 

When loading the vfe_v4l2 module error messages appear.

 

root@orangepipc:~# modprobe vfe_v4l2

root@orangepipc:~# dmesg

...SKIP...

[   18.819559] [drm] Initialized mali_drm 2.1.1 20101111 on minor 1
[   20.825372] vmouse_input_dev_open
[   23.340048] eth0: no IPv6 routers present
[   23.867915] Bluetooth: Core ver 2.16
[   23.868004] NET: Registered protocol family 31
[   23.868014] Bluetooth: HCI device and connection manager initialized
[   23.868026] Bluetooth: HCI socket layer initialized
[   23.868036] Bluetooth: L2CAP socket layer initialized
[   23.868062] Bluetooth: SCO socket layer initialized
[ 2078.177814] [iSP] isp platform_id = 5!
[ 2078.248173] [CSI_ERR][GC2035]sensor_read err at sensor_detect!
[ 2078.248195] [CSI_ERR][GC2035]chip found is not an target chip.
root@orangepipc:~#
 

 

In attempt to unload the vfe_v4l2 module

 

root@orangepipc:~# modprobe -r -v vfe_v4l2

rmmod vfe_v4l2
Segmentation fault
root@orangepipc:~#
 
Link to comment
Share on other sites

I am still on 5.23 on my board and this works.

I would suggest to @Igor / @zador.blood.stained to build a dev image with all CSI / VFE debugging enabled , this could help to track down possible errors.

 

I can't think anything else to try. I have searched for the commits that could possible break the CSI / VFE, but have not seen anything relevant.

Don't know if a change on kernel defconfig could break it.

Link to comment
Share on other sites

Problem is solved.

1) I make Armbian5.20 image from source code ( https://github.com/igorpecovnik/lib/archive/v2016.09.tar.gz )

2) Write image to SD card
3) Boot from SD card
4) After initial initialization of system it is necessary to execute:

sudo apt-get update

sudo apt-get upgrade

sudo reboot

5) Boot orangepi and login

sudo modprobe gc2035

sudo modprobe vfe_v4l2

 

 

The camera /dev/video0 present

 

root@orangepipc:~# dmesg

...SKIP...
[  414.935853] [iSP] isp platform_id = 5!
[  415.007804] [CSI][GC2035]V4L2_IDENT_SENSOR=2035[CSI][GC2035]disalbe oe!
 

root@orangepipc:~# ls /dev/vid*

/dev/video0
root@orangepipc:~# lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description:    Debian GNU/Linux 8.7 (jessie)
Release:        8.7
Codename:       jessie
root@orangepipc:~# uname -a
Linux orangepipc 3.4.113-sun8i #10 SMP PREEMPT Thu Feb 23 19:55:00 CET 2017 armv7l GNU/Linux
root@orangepipc:~# cat /etc/armbian-release
# PLEASE DO NOT EDIT THIS FILE
BOARD=orangepipc
BOARD_NAME="Orange Pi PC"
VERSION=5.25
LINUXFAMILY=sun8i
BRANCH=default
ARCH=arm
IMAGE_TYPE=stable
 
Link to comment
Share on other sites

...skip...

After that what did you did to get it work to 5.25?

Just apt-get update and apt-get upgrade ?

 

Yes.

I built from the source code because, there where I now am (Far North of Russia) very slow Internet. From a older image (armbian 5.20) too everything shall turn out.

Link to comment
Share on other sites

Thanks IgZero. After failing in every other direction I went, I accepted my fate, downgraded and followed your instructions. For the first time, my camera is visible to linux.  Now I can finally start playing with the project I bought the damn orange for.. :-)

Link to comment
Share on other sites

Ok pinned the problem : it is the boot.cmd/boot.scr which is NOT updated with a straight upgrade from 5.20 to >=5.25. 

Let's resume this :

- if you load the original boot.cmd from 5.20, gc2035/vfe_v4l4 simply work.

- if you load the updated boot.cmd from 5.25/5.26/5.27 gc2035/vfe_v4l2 stop to work (croaking about CSI not able to detect a target chip).

 

That's all folks!

Now should someone versed in u-boot parameters arcanes invest some time to see what's the real difference which impacts gc2035/vfe_v4l2, and eventually corrects/documents it to everybody potentially banging their head about this in the future ?

 

Regards,

Link to comment
Share on other sites

1 hour ago, graki said:

Now should someone versed in u-boot parameters arcanes invest some time to see what's the real difference which impacts gc2035/vfe_v4l2, and eventually corrects/documents it to everybody potentially banging their head about this in the future ?

Previously in the boot script there was a command to enable CSI related regulator by setting a GPIO pin. This was removed some time ago since this is not a good way to deal with this, it has to be solved by a kernel driver modification that uses FEX configuration.

Link to comment
Share on other sites

Hi, well is it not a module problem? As it sounds like it is a  boot configuration problem as graki said, but zador.blood.stained explained different. I was fiddeling quite a while without making it work. I recompiled the kernel with newest sources -> did not make any differences. So what is the action to take to make it work?

 

Thanks a lot

Link to comment
Share on other sites

Hello, tried what you suggested like that:

freshly booted into:  (lsb_release -a)

 

Distributor ID:    Debian
Description:    Debian GNU/Linux 8.8 (jessie)
Release:    8.8
Codename:    jessie
 

with kernel: 3.4.113-sun8i

 

modprobe gc_2035

modprobe vfe_v4l2

 

and dmesg after that looked like:

 

[ISP] isp platform_id = 5!
[CSI_ERR][GC2035]sensor_read err at sensor_detect!
[CSI_ERR][GC2035]chip found is not an target chip.
 

and I got a orange PI with H3 and 1GB 

 

any help would be supergreat. 

all the best

 

Link to comment
Share on other sites

9 minutes ago, armbinator said:

orange PI with H3 and 1GB

Can be either Plus or PC and IIRC both use different GPIO pins for CSI. I was asking for the following but that is only save on an OPi PC:

sudo modprobe -r vfe_v4l2
sudo modprobe -r gc_2035
sudo sunxi-pio -m PG11'<default><default<default><1>'
sudo modprobe gc_2035 hres=1
sudo modprove vfe_v4l2

 

Link to comment
Share on other sites

Hi, it is not Plus, just a https://linux-sunxi.org/Orange_Pi_PC to make sure we talk about the same.  

Just tried it and it didn't do anything different as before...

 

[ISP] isp platform_id = 5!
[CSI_ERR][GC2035]sensor_read err at sensor_detect!
[CSI_ERR][GC2035]chip found is not an target chip.

 

and if I try to remove the drivers, vfe_v4l2 then crash and burn:

....

[ 2395.772436] [<c03b5688>] (device_del+0x120/0x184) from [<c03b9f10>] (platform_device_del+0x28/0x5c)
[ 2395.772436] [<c03b9f10>] (platform_device_del+0x28/0x5c) from [<c03b9f60>] (platform_device_unregister+0x1c/0x28)
[ 2395.772436] [<c03b9f60>] (platform_device_unregister+0x1c/0x28) from [<bf3902c4>] (vfe_exit+0x88/0x174 [vfe_v4l2])
[ 2395.772436] [<bf3902c4>] (vfe_exit+0x88/0x174 [vfe_v4l2]) from [<c007fab0>] (sys_delete_module+0x1ac/0x24c)
[ 2395.772436] [<c007fab0>] (sys_delete_module+0x1ac/0x24c) from [<c000df60>] (ret_fast_syscall+0x0/0x30)
[ 2395.772436] Code: eb345031 e594313c e284101c e59f0064 (e5932034) 
[ 2397.972548] ---[ end trace 8d60e35500ae2068 ]---

 

Link to comment
Share on other sites

I am having the same issue trying to use my camera with my Orange Pi Lite.

[ISP] isp platform_id = 5!
[CSI_ERR][GC2035]sensor_read err at sensor_detect!
[CSI_ERR][GC2035]chip found is not an target chip.

Unfortunately, I have no idea how to fix it.  

Link to comment
Share on other sites

On 19/6/2017 at 6:02 PM, tkaiser said:

Can be either Plus or PC and IIRC both use different GPIO pins for CSI. I was asking for the following but that is only save on an OPi PC:


sudo modprobe -r vfe_v4l2
sudo modprobe -r gc_2035
sudo sunxi-pio -m PG11'<default><default<default><1>'
sudo modprobe gc_2035 hres=1
sudo modprove vfe_v4l2

 

 

Nope, it didn't work (just imaged and booted), will try with 5.20 now.

 

root@orangepipc:~# sunxi-pio -m PG11'<default><default<default><1>'
root@orangepipc:~# modprobe gc2035 hres=1
root@orangepipc:~# modprobe vfe_v4l2
root@orangepipc:~# tail /var/log/syslog
Jul  8 08:42:39 localhost systemd[1]: Starting User Manager for UID 0...
Jul  8 08:42:40 localhost systemd[1890]: user@0.service: Failed at step PAM spawning /lib/systemd/systemd: Operation not permitted
Jul  8 08:42:40 localhost systemd[1]: Started User Manager for UID 0.
Jul  8 08:42:41 localhost systemd[1]: Started Session 1 of user root.
Jul  8 08:42:58 localhost rsyslogd-2007: action 'action 9' suspended, next retry is Sat Jul  8 08:43:28 2017 [v8.16.0 try http://www.rsyslog.com/e/2007 ]
Jul  8 08:45:01 localhost rsyslogd-2007: action 'action 9' suspended, next retry is Sat Jul  8 08:45:31 2017 [v8.16.0 try http://www.rsyslog.com/e/2007 ]
Jul  8 08:45:01 localhost CRON[2163]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
Jul  8 08:45:04 localhost kernel: [  730.871462] [ISP] isp platform_id = 5!
Jul  8 08:45:04 localhost kernel: [  730.948212] [CSI_ERR][GC2035]sensor_read err at sensor_detect!
Jul  8 08:45:04 localhost kernel: [  730.948229] [CSI_ERR][GC2035]chip found is not an target chip.

 

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines