Asus tinker board help find missing RPi-Monitor parameter

[Tido]

Hi,

 

I am looking for owners of RK3288 who can help to find missing information in the system.

A lot already works from the template. Vcore has been added thanks to @TonyMac32  , but some important information like RAM frequency (dynamic.5.name=dram_frequency) is still missing.

This is my adjusted version, but to do some more HW testing we need as much information about the board as possible.

Spoiler

web.page.icon='img/logo.png'
web.page.menutitle='RPi-Monitor  <sub>('+data.hostname+')</sub>'
web.page.pagetitle='RPi-Monitor ('+data.hostname+')'

web.status.1.name=Raspberry Pi
web.statistics.1.name=Raspberry Pi

web.addons.1.name=Addons
web.addons.1.addons=about

include=/etc/rpimonitor/template/version.conf
include=/etc/rpimonitor/template/uptime.conf
include=/etc/rpimonitor/template/memory.conf
include=/etc/rpimonitor/template/swap.conf
include=/etc/rpimonitor/template/sdcard.conf

########################################################################
# Extract CPU information
#  Page: 1
#  Information               Status     Statistics
#  - cpu frequency           - yes      - no
#  - cpu voltage             - yes      - yes
#  - cpu load 1, 5, 15       - yes      - yes
#  - cpu scaling governor    - yes      - no
########################################################################
dynamic.1.name=cpu_frequency
dynamic.1.source=/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
dynamic.1.regexp=(.*)
#dynamic.1.postprocess=$1/1000000
dynamic.1.postprocess=sprintf("%.3f", $1/1000000)
dynamic.1.rrd=GAUGE

dynamic.2.name=load1,load5,load15
dynamic.2.source=/proc/loadavg
dynamic.2.regexp=^(\S+)\s(\S+)\s(\S+)
dynamic.2.postprocess=
dynamic.2.rrd=GAUGE

dynamic.3.name=scaling_governor
dynamic.3.source=/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
dynamic.3.regexp=(.*)
dynamic.3.postprocess=
dynamic.3.rrd=

dynamic.4.name=cpu_count
dynamic.4.source=grep -c processor /proc/cpuinfo
dynamic.4.regexp=(.*)
dynamic.4.postprocess=
dynamic.4.rrd=GAUGE

dynamic.5.name=dram_frequency
dynamic.5.source=/sys/devices/platform/sunxi-ddrfreq/devfreq/sunxi-ddrfreq/cur_freq
dynamic.5.regexp=(.*)
dynamic.5.postprocess=sprintf("%.3f", $1/1000000)
dynamic.5.rrd=GAUGE

dynamic.6.name=soctemp
dynamic.6.source=/etc/armbianmonitor/datasources/soctemp
dynamic.6.regexp=(.*)
dynamic.6.postprocess=sprintf("%.1f", $1/1000)
dynamic.6.rrd=GAUGE

#dynamic.7.name=externaltemp
#dynamic.7.source=/tmp/externaltemp
#dynamic.7.regexp=(.*)
#dynamic.7.postprocess=sprintf("%.1f", $1/1000)
#dynamic.7.rrd=GAUGE

#dynamic.8.name=disktemp
#dynamic.8.source=/tmp/disktemp
#dynamic.8.regexp=(.*)
#dynamic.8.postprocess=sprintf("%.1f", $1/1000)
#dynamic.8.rrd=GAUGE

dynamic.9.name=vcorevoltage
dynamic.9.source=/sys/class/regulator/regulator.4/microvolts
dynamic.9.regexp=(.*)
dynamic.9.postprocess=sprintf("%.2f", $1/1000000)
#dynamic.9.postprocess=$1/1000000
dynamic.9.rrd=GAUGE

#dynamic.10.name=cpu_stat,system_stat,user_stat,nice_stat,iowait_stat,irq_stat
#dynamic.10.source=/tmp/cpustat
#dynamic.10.regexp=^(\S+)\s(\S+)\s(\S+)\s(\S+)\s(\S+)\s(\S+)
#dynamic.10.postprocess=
#dynamic.10.rrd=GAUGE

dynamic.11.name=coolingstate
dynamic.11.source=/sys/devices/virtual/thermal/cooling_device0/cur_state
dynamic.11.regexp=(.*)
dynamic.11.postprocess=
dynamic.11.rrd=GAUGE

#dynamic.12.name=cpuminer
#dynamic.12.source=/tmp/khash
#dynamic.12.regexp=(.*)
#dynamic.12.postprocess=
#dynamic.12.rrd=GAUGE


########################################################################
#    STATUS PAGE
########################################################################
web.status.1.content.1.name=CPU
web.status.1.content.1.icon=cpu.png
web.status.1.content.1.line.1=JustGageBar("Load", "1min", 0, data.load1, 3, 100, 80)+" "+JustGageBar("Load", "5min", 0, data.load5, 3, 100, 80)+" "+JustGageBar("Load", "15min", 0, data.load15, 3, 100, 80)
#web.status.1.content.1.line.2="CPU total: <b>" + data.cpu_stat + "%</b> (Sys: " + data.system_stat + "%, User: " + data.user_stat + "%, I/O wait: " + data.iowait_stat + "%, Nice: " + data.nice_stat + "%)"
web.status.1.content.1.line.2="CPU frequency: <b>" + data.cpu_frequency + "MHz</b>  DRAM frequency: <b>Not available</b>"
web.status.1.content.1.line.3="Governor: <b>" + data.scaling_governor + "</b>  Active CPU cores: <b>" + data.cpu_count + "</b>  Vcore: <b>" + data.vcorevoltage + "</b>"

web.status.1.content.3.name=Temperature
web.status.1.content.3.icon=cpu_temp.png
web.status.1.content.3.line.1=JustGageBar("SoC", "  C",0, data.soctemp , 100,100,80,percentColors,50,70)+" "+JustGageBar("Disk", "  C",0, data.disktemp , 100,100,80,percentColor$
web.status.1.content.3.line.1=JustGageBar("SoC", "°C",0, data.soctemp , 100,100,80,percentColors,50,70)+" "+JustGageBar("Disk", "°C",0, data.disktemp , 100,100,80,percentColors,40,50)+" "+JustGageBar("Cooling State", "",0, data.coolingstate , 5,100,80,percentColors,1,2)


########################################################################
#   STATISTICS PAGE
########################################################################
web.statistics.1.content.1.name=Load / Clockspeeds / Temperature
web.statistics.1.content.1.graph.1=load1
web.statistics.1.content.1.graph.2=load5
web.statistics.1.content.1.graph.3=load15
web.statistics.1.content.1.graph.4=cpu_frequency
web.statistics.1.content.1.graph.5=cpu_count
web.statistics.1.content.1.graph.6=soctemp
web.statistics.1.content.1.graph.7=vcorevoltage

web.statistics.1.content.1.ds_graph_options.load1.label=Load 1 min
web.statistics.1.content.1.ds_graph_options.load5.label=Load 5 min
web.statistics.1.content.1.ds_graph_options.load15.label=Load 15 min

web.statistics.1.content.1.ds_graph_options.cpu_frequency.label=CPU Clock speed (GHz)
web.statistics.1.content.1.ds_graph_options.cpu_frequency.yaxis=2

web.statistics.1.content.1.ds_graph_options.cpu_count.label=Active CPUs
web.statistics.1.content.1.ds_graph_options.cpu_count.yaxis=2

web.statistics.1.content.1.ds_graph_options.soctemp.label=SoC temp (  C)

web.statistics.1.content.1.ds_graph_options.vcorevoltage.label=Vcore (V)
web.statistics.1.content.1.ds_graph_options.vcorevoltage.yaxis=2

web.statistics.1.content.1.ds_graph_options.cpu_stat.label=CPU total (%)
web.statistics.1.content.1.graph_options.y1axis={ position: "left", min: 35, max: 75 }
web.statistics.1.content.1.graph_options.y2axis={ position: "right" }



# von Tido
web.statistics.1.content.3.name=Load / Cores / Temperature
web.statistics.1.content.3.graph.1=load1
web.statistics.1.content.3.graph.2=cpu_count
web.statistics.1.content.3.graph.3=soctemp
web.statistics.1.content.3.ds_graph_options.load1.label=Load 1 min
web.statistics.1.content.3.ds_graph_options.cpu_count.label=Active CPUs
web.statistics.1.content.3.ds_graph_options.soctemp.label=SoC temp (  C)
web.statistics.1.content.3.ds_graph_options.soctemp.yaxis=2

 

 

---

This is the Template from armbian.

cp /etc/rpimonitor/template/raspbian.conf /etc/rpimonitor/template/raspbian.conf.orig
so you have a backup.

Now delete all the text within the file
ctrl + k
and paste this text into it:

Spoiler

web.page.icon='img/logo.png'
web.page.menutitle='RPi-Monitor  <sub>('+data.hostname+')</sub>'
web.page.pagetitle='RPi-Monitor ('+data.hostname+')'

web.status.1.name=Raspberry Pi
web.statistics.1.name=Raspberry Pi

web.addons.1.name=Addons
web.addons.1.addons=about

include=/etc/rpimonitor/template/version.conf
include=/etc/rpimonitor/template/uptime.conf
include=/etc/rpimonitor/template/memory.conf
include=/etc/rpimonitor/template/swap.conf
include=/etc/rpimonitor/template/sdcard.conf

dynamic.1.name=cpu_frequency
dynamic.1.source=/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
dynamic.1.regexp=(.*)
dynamic.1.postprocess=sprintf("%.3f", $1/1000000)
dynamic.1.rrd=GAUGE

dynamic.2.name=load1,load5,load15
dynamic.2.source=/proc/loadavg
dynamic.2.regexp=^(\S+)\s(\S+)\s(\S+)
dynamic.2.postprocess=
dynamic.2.rrd=GAUGE

dynamic.3.name=scaling_governor
dynamic.3.source=/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
dynamic.3.regexp=(.*)
dynamic.3.postprocess=
dynamic.3.rrd=

dynamic.4.name=cpu_count
dynamic.4.source=grep -c processor /proc/cpuinfo
dynamic.4.regexp=(.*)
dynamic.4.postprocess=
dynamic.4.rrd=GAUGE

dynamic.5.name=dram_frequency
dynamic.5.source=/sys/devices/platform/sunxi-ddrfreq/devfreq/sunxi-ddrfreq/cur_freq
dynamic.5.regexp=(.*)
dynamic.5.postprocess=sprintf("%.3f", $1/1000000)
dynamic.5.rrd=GAUGE

dynamic.6.name=soctemp
dynamic.6.source=/etc/armbianmonitor/datasources/soctemp
dynamic.6.regexp=(.*)
dynamic.6.postprocess=
dynamic.6.rrd=GAUGE

dynamic.7.name=externaltemp
dynamic.7.source=/tmp/externaltemp
dynamic.7.regexp=(.*)
dynamic.7.postprocess=sprintf("%.1f", $1/1000)
dynamic.7.rrd=GAUGE

dynamic.8.name=disktemp
dynamic.8.source=/tmp/disktemp
dynamic.8.regexp=(.*)
dynamic.8.postprocess=sprintf("%.1f", $1/1000)
dynamic.8.rrd=GAUGE

dynamic.9.name=vcorevoltage
dynamic.9.source=/sys/class/regulator/regulator.4/microvolts
dynamic.9.regexp=(.*)
dynamic.9.postprocess=sprintf("%.2f", $1/1000)
dynamic.9.rrd=GAUGE

dynamic.10.name=cpu_stat,system_stat,user_stat,nice_stat,iowait_stat,irq_stat
dynamic.10.source=/tmp/cpustat
dynamic.10.regexp=^(\S+)\s(\S+)\s(\S+)\s(\S+)\s(\S+)\s(\S+)
dynamic.10.postprocess=
dynamic.10.rrd=GAUGE

dynamic.11.name=coolingstate
dynamic.11.source=/sys/devices/virtual/thermal/cooling_device0/cur_state
dynamic.11.regexp=(.*)
dynamic.11.postprocess=
dynamic.11.rrd=GAUGE

dynamic.12.name=cpuminer
dynamic.12.source=/tmp/khash
dynamic.12.regexp=(.*)
dynamic.12.postprocess=
dynamic.12.rrd=GAUGE


########################################################################
#    STATUS PAGE
########################################################################
web.status.1.content.1.name=CPU
web.status.1.content.1.icon=cpu.png
web.status.1.content.1.line.1=JustGageBar("Load", "1min", 0, data.load1, 3, 100, 80)+" "+JustGageBar("Load", "5min", 0, data.load5, 3, 100, 80)+" "+JustGageBar("Load", "15min", 0, data.load15, 3, 100, 80)
web.status.1.content.1.line.2="CPU total: <b>" + data.cpu_stat + "%</b> (Sys: " + data.system_stat + "%, User: " + data.user_stat + "%, I/O wait: " + data.iowait_stat + "%, Nice: " + data.nice_stat + "%)"
web.status.1.content.1.line.3="CPU frequency: <b>" + data.cpu_frequency + "GHz</b> &nbsp;DRAM frequency: <b>" + data.dram_frequency + "GHz</b>"
web.status.1.content.1.line.4="Governor: <b>" + data.scaling_governor + "</b> &nbsp;Active CPU cores: <b>" + data.cpu_count + "</b> &nbsp;Vcore: <b>" + data.vcorevoltage + "</b>"

web.status.1.content.3.name=Temperature
web.status.1.content.3.icon=cpu_temp.png
web.status.1.content.3.line.1=JustGageBar("SoC", "°C",0, data.soctemp , 100,100,80,percentColors,50,70)+" "+JustGageBar("Disk", "°C",0, data.disktemp , 100,100,80,percentColors,40,50)+" "+JustGageBar("Cooling State", "",0, data.coolingstate , 5,100,80,percentColors,1,2)


########################################################################
#   STATISTICS PAGE
########################################################################
web.statistics.1.content.1.name=Load / Clockspeeds / Temperature
web.statistics.1.content.1.graph.1=load1
web.statistics.1.content.1.graph.2=load5
web.statistics.1.content.1.graph.3=load15
web.statistics.1.content.1.graph.4=cpu_frequency
web.statistics.1.content.1.graph.5=dram_frequency
web.statistics.1.content.1.graph.6=cpu_count
web.statistics.1.content.1.graph.7=soctemp
web.statistics.1.content.1.graph.8=vcorevoltage
web.statistics.1.content.1.graph.9=disktemp
web.statistics.1.content.1.graph.10=cpu_stat
web.statistics.1.content.1.graph.11=coolingstate
web.statistics.1.content.1.graph.12=cpuminer
web.statistics.1.content.1.ds_graph_options.load1.label=Load 1 min
web.statistics.1.content.1.ds_graph_options.load5.label=Load 5 min
web.statistics.1.content.1.ds_graph_options.load15.label=Load 15 min
web.statistics.1.content.1.ds_graph_options.cpu_frequency.label=CPU Clock speed (GHz)
web.statistics.1.content.1.ds_graph_options.cpu_frequency.yaxis=2
web.statistics.1.content.1.ds_graph_options.dram_frequency.label=DRAM Clock speed (GHz)
web.statistics.1.content.1.ds_graph_options.dram_frequency.yaxis=2
web.statistics.1.content.1.ds_graph_options.cpu_count.label=Active CPUs
web.statistics.1.content.1.ds_graph_options.cpu_count.yaxis=2
web.statistics.1.content.1.ds_graph_options.soctemp.label=SoC temp (°C)
web.statistics.1.content.1.ds_graph_options.cpuminer.label=khash/s
web.statistics.1.content.1.ds_graph_options.cpuminer.yaxis=2
web.statistics.1.content.1.ds_graph_options.disktemp.label=Disk temp (°C)
web.statistics.1.content.1.ds_graph_options.vcorevoltage.label=Vcore (V)
web.statistics.1.content.1.ds_graph_options.vcorevoltage.yaxis=2
web.statistics.1.content.1.ds_graph_options.coolingstate.label=Cooling State
web.statistics.1.content.1.ds_graph_options.coolingstate.yaxis=2
web.statistics.1.content.1.ds_graph_options.cpu_stat.label=CPU total (%)
web.statistics.1.content.1.graph_options.y1axis={ position: "left", min: 35, max: 75 }
web.statistics.1.content.1.graph_options.y2axis={ position: "right" }

web.statistics.1.content.2.name=Detailed CPU Stats
web.statistics.1.content.2.graph.1=cpu_stat
web.statistics.1.content.2.graph.2=system_stat
web.statistics.1.content.2.graph.3=user_stat
web.statistics.1.content.2.graph.4=nice_stat
web.statistics.1.content.2.graph.5=iowait_stat
web.statistics.1.content.2.graph.6=irq_stat
web.statistics.1.content.2.ds_graph_options.cpu_stat.label=CPU total (%)
web.statistics.1.content.2.ds_graph_options.system_stat.label=System (%)
web.statistics.1.content.2.ds_graph_options.user_stat.label=User (%)
web.statistics.1.content.2.ds_graph_options.nice_stat.label=Nice (%)
web.statistics.1.content.2.ds_graph_options.iowait_stat.label=I/O wait (%)
web.statistics.1.content.2.ds_graph_options.irq_stat.label=IRQ/softirq (%)
web.statistics.1.content.2.graph_options.y1axis={ position: "left", min: 0, max: 100 }

 

Now you will see that some information is missing, like RAM-frequency, but also 'Detailed CPU Stats'.

 

[Tido]

While trying to find some software telling me more about the hardware I came across this:

dpkg -l procinfo hwinfo lshw dmidecode  
apt-get install procinfo hwinfo lshw inxi (needs like 830kB)

 

 

Commands with the software just installed (line by line):

hwinfo > /home/hwinfo.txt   (export it to the SDcard as text file 170kB)
hwinfo --short > /home/hwinfo-short.txt
hwinfo   (long version)
dmesg | grep -i memory
dmesg | grep -i usb
lsusb -t
dmesg | grep -i tty
I guess it is only for x86 system with BIOS man dmidecode
dmidecode -t memory
dmidecode -t bios
root@tinkerboard:/home# dmidecode -t processor
# dmidecode 2.12
/dev/mem: Operation not permitted

procinfo -h
procinfo
procinfo -S   (values per second)
lscpu
lshw -short
lshw (long version)
lshw -class memory

inxi -Fx
inxi -h

 

 

GUI applications:
https://github.com/fontanon/udev-discover
sysinfo
hardinfo

 

 

[Tido]

While all chasing the voltage on their board - I thought it could be useful to have a profile in RPi-Monitor to read these out.

Step by step so you are not losing any data.

Backup:

cp /etc/rpimonitor/template/raspbian.conf /etc/rpimonitor/template/raspbian.conf.orig

Paste the content:

Spoiler

nano /etc/rpimonitor/template/raspbian.conf
Now delete all the text within the file and paste this text into it:  ctrl + k

# Paste these lines:
web.page.icon='img/logo.png'
web.page.menutitle='RPi-Monitor  <sub>('+data.hostname+')</sub>'
web.page.pagetitle='RPi-Monitor ('+data.hostname+')'

web.status.1.name=Raspberry Pi
web.statistics.1.name=Raspberry Pi

web.addons.1.name=Addons
web.addons.1.addons=about

include=/etc/rpimonitor/template/version.conf
include=/etc/rpimonitor/template/uptime.conf
include=/etc/rpimonitor/template/memory.conf
include=/etc/rpimonitor/template/sdcard.conf

dynamic.1.name=cpu_frequency
dynamic.1.source=/sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
dynamic.1.regexp=(.*)
dynamic.1.postprocess=sprintf("%.3f", $1/1000000)
dynamic.1.rrd=GAUGE

dynamic.2.name=load1,load5,load15
dynamic.2.source=/proc/loadavg
dynamic.2.regexp=^(\S+)\s(\S+)\s(\S+)
dynamic.2.postprocess=
dynamic.2.rrd=GAUGE

dynamic.3.name=vsys_regulator
dynamic.3.source=/sys/devices/platform/vsys-regulator/regulator/regulator.1/microvolts
dynamic.3.regexp=(.*)
dynamic.3.postprocess=sprintf("%.2f", $1/1000000)
dynamic.3.rrd=GAUGE

dynamic.4.name=vcorevoltage
dynamic.4.source=/sys/class/regulator/regulator.4/microvolts
dynamic.4.regexp=(.*)
dynamic.4.postprocess=sprintf("%.2f", $1/1000000)
dynamic.4.rrd=GAUGE

dynamic.5.name=vcc_SD
dynamic.5.source=/sys/devices/platform/sdmmc-regulator/regulator/regulator.2/microvolts
dynamic.5.regexp=(.*)
dynamic.5.postprocess=sprintf("%.2f", $1/1000000)
dynamic.5.rrd=GAUGE

dynamic.6.name=vccio_SD
dynamic.6.source=/sys/class/regulator/regulator.8/microvolts
dynamic.6.regexp=(.*)
dynamic.6.postprocess=sprintf("%.2f", $1/1000000)
dynamic.6.rrd=GAUGE

dynamic.7.name=vdd_gpu
dynamic.7.source=/sys/class/regulator/regulator.10/microvolts
dynamic.7.regexp=(.*)
dynamic.7.postprocess=sprintf("%.2f", $1/1000000)
dynamic.7.rrd=GAUGE

dynamic.8.name=vdd_logic
dynamic.8.source=/sys/devices/platform/vdd_log/regulator/regulator.3/microvolts
dynamic.8.regexp=(.*)
dynamic.8.postprocess=sprintf("%.2f", $1/1000000)
dynamic.8.rrd=GAUGE


########################################################################
#    STATUS PAGE
########################################################################
web.status.1.content.1.name=CPU
web.status.1.content.1.icon=cpu.png
web.status.1.content.1.line.1=JustGageBar("Load", "1min", 0, data.load1, 3, 100, 80)+" "+JustGageBar("Load", "5min", 0, data.load5, 3, 100, 80)+" "+JustGageBar("Load", "15min", 0, data.load15, 3, 100, 80)
#web.status.1.content.1.line.2="CPU total: <b>" + data.cpu_stat + "%</b> (Sys: " + data.system_stat + "%, User: " + data.user_stat + "%, I/O wait: " + data.iowait_stat + "%, Nice: " + data.nice_stat + "%)"
web.status.1.content.1.line.2="CPU frequency: <b>" + data.cpu_frequency + "MHz</b>  DRAM frequency: <b>Not available</b>"
web.status.1.content.1.line.3="Governor: <b>" + data.scaling_governor + "</b>  Active CPU cores: <b>" + data.cpu_count + "</b>  Vcore: <b>" + data.vcorevoltage + "</b>"

web.status.1.content.3.name=Voltage
web.status.1.content.3.icon=pmu.png
web.status.1.content.3.line.1=JustGageBar("SoC", "  V",0, data.vcorevoltage , 2.5,100,80,percentColors,1.1,1.35)+" "+JustGageBar("GPU", "  V",0, data.vdd_gpu , 2,100,80,percentColors,1.1,2)+" "+JustGageBar("System", "",0, data.vsys_regulator , 10,100,80,percentColors,5.1,5.4)

########################################################################
#   STATISTICS PAGE
########################################################################
web.statistics.1.content.1.name=Load / Clockspeeds / Voltage
web.statistics.1.content.1.graph.1=load1
web.statistics.1.content.1.graph.2=cpu_frequency
web.statistics.1.content.1.graph.3=vsys_regulator
web.statistics.1.content.1.graph.4=vcorevoltage
web.statistics.1.content.1.graph.5=vcc_SD
web.statistics.1.content.1.graph.6=vccio_SD
web.statistics.1.content.1.graph.7=vdd_gpu
web.statistics.1.content.1.graph.8=vdd_logic

web.statistics.1.content.1.ds_graph_options.load1.label=Load 1 min
web.statistics.1.content.1.ds_graph_options.cpu_frequency.label=CPU Clock speed (GHz)
web.statistics.1.content.1.ds_graph_options.cpu_frequency.yaxis=2

web.statistics.1.content.1.ds_graph_options.vsys_regulator.label=vsys-regulator
web.statistics.1.content.1.ds_graph_options.vcorevoltage.label=Vcore (V)
web.statistics.1.content.1.ds_graph_options.vcorevoltage.yaxis=2

web.statistics.1.content.1.ds_graph_options.vcc_SD.label=vcc_SD
web.statistics.1.content.1.ds_graph_options.vccio_SD.label=vccio_SD

web.statistics.1.content.1.ds_graph_options.vdd_gpu.label=vdd_gpu
web.statistics.1.content.1.ds_graph_options.vdd_logic.label=vdd_logic

 

 

 

if it looks different adjust with: chmod 0664

-rw-rw-r-- 1 root root  6442 May 12 23:46 raspbian.conf
-rw-rw-r-- 1 root root 13825 May  6 16:23 raspbian.conf.orig

 

Edited May 18, 2017 by Tido
added some gage for status page

[Tido]

This is form another thread about Kernel 4.13

Quote

Just pushed re-organized thermals to repo,

cpu_thermal is zone0,

gpu_thermal is zone1. 

This is for dev, next, and default.