GAZ082 Posted June 11, 2017 Posted June 11, 2017 I installed a TPLINK wifi dongle, but when trying to set the interface up, i get the message of the subject. What can it be? Thanks! root@kraken:/etc/nginx/sites-enabled# ip link 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,DYNAMIC,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000 link/ether d0:63:b4:00:1d:57 brd ff:ff:ff:ff:ff:ff 3: wlan1: <BROADCAST,MULTICAST,DYNAMIC> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether c4:6e:1f:14:4c:39 brd ff:ff:ff:ff:ff:ff 4: wlan0: <BROADCAST,MULTICAST,DYNAMIC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DORMANT group default qlen 1000 link/ether 40:2c:f4:ad:f3:6e brd ff:ff:ff:ff:ff:ff root@kraken:/etc/nginx/sites-enabled# sudo ip link set wlan1 up RTNETLINK answers: Operation not permitted root@kraken:/etc/nginx/sites-enabled#
Recommended Posts