SmartQ 5 - Mobile Internet Device

[xlogik]

Hi All,

Looking for assistance with getting an old SmartQ5 Mobile Internet Device running with Armbian. I was able to locate Github page (https://github.com/tpruvot/smartq-magicsd) which references booting from SD but need assistance getting armbian compiled and configured for the device. Any help is appreciated!

 

SPECS:

    Samsung Mobile Application Processor S3C6410 based on ARM11 core at 667 MHz/800 MHz
    128 MB DDR 133/333 MHz SDRAM
    1 GB NAND FLASH (256 MB usable for storage)
    AC97 audio codec & PCM 24-bit audio
    SoC graphics unit, OpenGL ES 1.1/2.0, 4M triangles/sec @133Mhz (Transform only)
    Integrated Wi-Fi 802.11b/g
    Integrated Bluetooth 2.0 + EDR
    800x480 resolution resistive touchscreen LCD, 4.3", 16.7 million colors
    SDHC card slot (up to 32 GB)
    Headphone output power up to earphone 40 mW, frequency Response 20 Hz-20.000 Hz SNR 94dB
    Internal microphone
    USB 2.0 OTG port (480 Mbit/s)
    Runs Ubuntu Linux
    2000mAH rechargeable lithium polymer battery
    Dimensions: 120x74x14mm
    Weight: 160 g