Jump to content

OPI Win - using simplefb & hdmi


t-bob

Recommended Posts

Hi,

 

I was wondering if anyone had been able to get this working ? And, yes i know that OPI-Win is WIP/testing.

 

I read some stuff here & on the linux-sunxi irc log that seemed to say that it should work & I've tried the following without luck. I was wondering if someone with alittle more knowledge about this may be able to help or point me in the right direction.

 

I also tried to compile u-boot v2017-09 but it fails with a sdram too big error :( I tried to backport some of the config to 2017-07 but that'll take time i expect ...

 

        /boot/armbianEnv.txt (many combinations of this)
disp_mode=720p60
disp_dvi_compat=1
verbosity=7

 

        /boot/boot.cmd (many combinations of this)
setenv stdout=serial,vga
setenv stderr=serial,vga

setenv console=tty1 (i've also tried tty0, tty2 etc)

setenv bootargs console=tty0 hdmi.audio=EDID:0 disp.screen0_output_mode=720p60 root=/dev/mmcblk0p1 rootwait panic=10

setenv video-mode sunxi:1024x768-24@60,monitor=dvi,hpd=0,edid=0

 

Many thanks in advance

 

TB

 

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines