AntonioPisano Posted September 14, 2017 Share Posted September 14, 2017 Hello there, I just flashed latest armbian (downloaded yesterday) on my A20 Olinuxino Micro. Version was with legacy kernel as my use case involves multimedia. SD card is Samsung Evo 128GB. Once I attach HDMI display, I can see armbian logo and something happening (booting kernel etc) just for a few seconds, then screen flashes with colors and I don't get anymore signal. I tried with two monitors with the same reult. Later today I will try using cable-f attached to pins to see wether something is happening under the hood (I expect yes). In the meantime can someone confirm this issue? What should I try in order to fix this? Thanks in advance for any help on this. Antonio Link to comment Share on other sites More sharing options...
AntonioPisano Posted September 25, 2017 Author Share Posted September 25, 2017 Ended up issue was already described here Solution for me was to bin2fex micro.bin file and replace screen0_output_type = 1 screen0_output_mode = 5 screen1_output_type = 1 screen1_output_mode = 5 with screen0_output_type = 3 screen0_output_mode = 4 screen1_output_type = 0 screen1_output_mode = 4 taken from lime.fex here https://github.com/armbian/build/blob/master/config/fex/lime2.fex You should consider fixing this upstream, as current a20 olimex micro legacy image won't output on HDMI out of the box Ciao Link to comment Share on other sites More sharing options...
Igor Posted September 25, 2017 Share Posted September 25, 2017 https://github.com/armbian/build/commit/e868c5ddfb611cc15cfe0168db4d83666e4537d9 Link to comment Share on other sites More sharing options...
Recommended Posts