Jump to content

Orange Pi One bootlooping with current armbian


willmore

Recommended Posts

I just updated two Orange Pi One boards and rebooted them to get to the new kernel only to have them boot loop.

 

I know, development, not supported. :)  I'm not asking for a solution, I'm just alerting people to the situation so they can avoid messing up their boxes.

 

Console log attached if you're curious.

orangepione.txt

Edited by willmore
Forgot to mention the purpose of the attached file.
Link to comment
Share on other sites

Okay, one of them--that I was using for SPI testing--has:

verbosity=7
console=both
disp_mode=1920x1080p60
rootdev=UUID=1ab2a8dc-160b-474b-ab35-ba43e08d90ef
rootfstype=ext4
overlay_prefix=sun8i-h3
overlays=spi-spidev
param_spidev_spi_bus=0
param_spidev_max_freq=100000000 

The second Orange Pi One has the same config.  I'm going to pull the spi overlay and see if that changes anything.

 

I have an up to date Orange Pi PC which is H3 based and it rebooted fine after the recent update.  Would that be sufficient?  If not, can you point me to one you would like me to test?  The https://dl.armbian.com/orangepione/ directory doesn't seem to have anything new in it.

Link to comment
Share on other sites

Okay, I put the changes back in and rebooted.  It works just fine.  I haven't verified functionality of SPI, though.  Kernel log says:

[    9.546118] spidev spi0.0: probing from DT

 

So, it looks like it's working.  Need to me do anything else?

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines