Jump to content

OrangePi Zero 1 (H2+) : Sound-Issue

Lelo

By Lelo
in Orange Pi Zero

 Share

Recommended Posts

Lelo

Lelo

Posted
Posted

Hello.

 

I hava a serious problem with an Orange Pi Zero and it´s sound ouput: I just can´t get it working. :-(

 

Hardware: Orange Pi Zero (H2+/512MB) with the Orange Pi Extension Board.


Software: Armbian_5.30_Orangepizero_Ubuntu_xenial_default_3.4.113

   (Linux orangepizero 3.4.113-sun8i #16 SMP PREEMPT Tue Jun 13 14:15:57 CEST 2017 armv7l armv7l armv7l GNU/Linux)

 

 

I already tried this link for activating Line-Out in general, but it is still not working: "speaker-test" does still not bring any sound to teh 3.5mm jack.

 

My actual "alsamixer"-config as shown by "nano /var/lib/alsa/asound.state": 

state.I2SES8316 {
	control.1 {
		iface MIXER
		name 'HP Playback Volume'
		value.0 0
		value.1 0
		comment {
			access 'read write'
			type INTEGER
			count 2
			range '0 - 0'
			dbmin -4800
			dbmax -4800
			dbvalue.0 -4800
			dbvalue.1 -4800
		}
	}
	control.2 {
		iface MIXER
		name 'HPMixer Gain'
		value.0 3
		value.1 3
		comment {
			access 'read write'
			type INTEGER
			count 2
			range '0 - 7'
			dbmin -1200
			dbmax -150
			dbvalue.0 -750
			dbvalue.1 -750
		}
	}
	control.3 {
		iface MIXER
		name 'DAC Playback Volume'
		value.0 183
		value.1 183
		comment {
			access 'read write'
			type INTEGER
			count 2
			range '0 - 192'
			dbmin -9999999
			dbmax 0
			dbvalue.0 -450
			dbvalue.1 -450
		}
	}
	control.4 {
		iface MIXER
		name 'Enable DAC Soft Ramp'
		value false
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
	control.5 {
		iface MIXER
		name 'DAC Soft Ramp Rate'
		value 4
		comment {
			access 'read write'
			type INTEGER
			count 1
			range '0 - 4'
		}
	}
	control.6 {
		iface MIXER
		name 'Playback Polarity'
		value Normal
		comment {
			access 'read write'
			type ENUMERATED
			count 1
			item.0 Normal
			item.1 'R Invert'
			item.2 'L Invert'
			item.3 'L + R Invert'
		}
	}
	control.7 {
		iface MIXER
		name 'DAC Notch Filter'
		value false
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
	control.8 {
		iface MIXER
		name 'DAC Double Fs Mode'
		value false
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
	control.9 {
		iface MIXER
		name 'DAC Volume Control-LeR'
		value 0
		comment {
			access 'read write'
			type INTEGER
			count 1
			range '0 - 1'
		}
	}
	control.10 {
		iface MIXER
		name 'DAC Stereo Enhancement'
		value 0
		comment {
			access 'read write'
			type INTEGER
			count 1
			range '0 - 7'
		}
	}
	control.11 {
		iface MIXER
		name 'MIC Boost'
		value false
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
	control.12 {
		iface MIXER
		name 'Input PGA'
		value 10
		comment {
			access 'read write'
			type INTEGER
			count 1
			range '0 - 8'
		}
	}
	control.13 {
		iface MIXER
		name 'ADC Capture Volume'
		value 192
		comment {
			access 'read write'
			type INTEGER
			count 1
			range '0 - 192'
			dbmin -9999999
			dbmax 0
			dbvalue.0 0
		}
	}
	control.14 {
		iface MIXER
		name 'ADC Soft Ramp'
		value true
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
	control.15 {
		iface MIXER
		name 'Capture Polarity'
		value Normal
		comment {
			access 'read write'
			type ENUMERATED
			count 1
			item.0 Normal
			item.1 Invert
		}
	}
	control.16 {
		iface MIXER
		name 'ADC Double FS Mode'
		value false
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
	control.17 {
		iface MIXER
		name 'ALC Capture Target Volume'
		value 9
		comment {
			access 'read write'
			type INTEGER
			count 1
			range '0 - 10'
		}
	}
	control.18 {
		iface MIXER
		name 'ALC Capture Max PGA'
		value 20
		comment {
			access 'read write'
			type INTEGER
			count 1
			range '0 - 28'
		}
	}
	control.19 {
		iface MIXER
		name 'ALC Capture Min PGA'
		value 8
		comment {
			access 'read write'
			type INTEGER
			count 1
			range '0 - 28'
		}
	}
	control.20 {
		iface MIXER
		name 'ALC Capture Function'
		value On
		comment {
			access 'read write'
			type ENUMERATED
			count 1
			item.0 Off
			item.1 On
		}
	}
	control.21 {
		iface MIXER
		name 'ALC Capture Hold Time'
		value 0
		comment {
			access 'read write'
			type INTEGER
			count 1
			range '0 - 10'
		}
	}
	control.22 {
		iface MIXER
		name 'ALC Capture Decay Time'
		value 0
		comment {
			access 'read write'
			type INTEGER
			count 1
			range '0 - 10'
		}
	}
	control.23 {
		iface MIXER
		name 'ALC Capture Attack Time'
		value 5
		comment {
			access 'read write'
			type INTEGER
			count 1
			range '0 - 10'
		}
	}
	control.24 {
		iface MIXER
		name 'ALC Capture NG Threshold'
		value 1
		comment {
			access 'read write'
			type INTEGER
			count 1
			range '0 - 31'
		}
	}
	control.25 {
		iface MIXER
		name 'ALC Capture NG Type'
		value 'Mute ADC Output'
		comment {
			access 'read write'
			type ENUMERATED
			count 1
			item.0 'Constant PGA Gain'
			item.1 'Mute ADC Output'
		}
	}
	control.26 {
		iface MIXER
		name 'ALC Capture NG Switch'
		value true
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
	control.27 {
		iface MIXER
		name 'Right Hp mixer RLIN Switch'
		value false
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
	control.28 {
		iface MIXER
		name 'Right Hp mixer Right DAC Switch'
		value true
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
	control.29 {
		iface MIXER
		name 'Left Hp mixer LLIN Switch'
		value false
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
	control.30 {
		iface MIXER
		name 'Left Hp mixer Left DAC Switch'
		value true
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
	control.31 {
		iface MIXER
		name 'Right Hp mux'
		value lin1-rin1
		comment {
			access 'read write'
			type ENUMERATED
			count 1
			item.0 lin1-rin1
			item.1 lin2-rin2
			item.2 'lin-rin with Boost'
			item.3 'lin-rin with Boost and PGA'
		}
	}
	control.32 {
		iface MIXER
		name 'Left Hp mux'
		value lin1-rin1
		comment {
			access 'read write'
			type ENUMERATED
			count 1
			item.0 lin1-rin1
			item.1 lin2-rin2
			item.2 'lin-rin with Boost'
			item.3 'lin-rin with Boost and PGA'
		}
	}
	control.33 {
		iface MIXER
		name 'DAC SRC Mux'
		value 'LDATA TO LDAC, RDATA TO RDAC'
		comment {
			access 'read write'
			type ENUMERATED
			count 1
			item.0 'LDATA TO LDAC, RDATA TO RDAC'
			item.1 'LDATA TO LDAC, LDATA TO RDAC'
			item.2 'RDATA TO LDAC, RDATA TO RDAC'
			item.3 'RDATA TO LDAC, LDATA TO RDAC'
		}
	}
	control.34 {
		iface MIXER
		name 'Digital Mic Mux'
		value 'dmic disable'
		comment {
			access 'read write'
			type ENUMERATED
			count 1
			item.0 'dmic disable'
			item.1 'dmic data at high level'
			item.2 'dmic data at low level'
		}
	}
	control.35 {
		iface MIXER
		name 'Differential Mux'
		value 'lin1-rin1 with 20db Boost'
		comment {
			access 'read write'
			type ENUMERATED
			count 1
			item.0 lin1-rin1
			item.1 lin2-rin2
			item.2 'lin1-rin1 with 20db Boost'
			item.3 'lin2-rin2 with 20db Boost'
		}
	}
}
state.SPDIFTranscieve {
	control {
	}
}
state.audiocodec {
	control.1 {
		iface MIXER
		name 'MIC1_G boost stage output mixer control'
		value 3
		comment {
			access 'read write'
			type INTEGER
			count 1
			range '0 - 7'
		}
	}
	control.2 {
		iface MIXER
		name 'MIC2_G boost stage output mixer control'
		value 3
		comment {
			access 'read write'
			type INTEGER
			count 1
			range '0 - 7'
		}
	}
	control.3 {
		iface MIXER
		name 'LINEIN_G boost stage output mixer control'
		value 3
		comment {
			access 'read write'
			type INTEGER
			count 1
			range '0 - 7'
		}
	}
	control.4 {
		iface MIXER
		name 'MIC1 boost AMP gain control'
		value 4
		comment {
			access 'read write'
			type INTEGER
			count 1
			range '0 - 7'
		}
	}
	control.5 {
		iface MIXER
		name 'MIC2 boost AMP gain control'
		value 4
		comment {
			access 'read write'
			type INTEGER
			count 1
			range '0 - 7'
		}
	}
	control.6 {
		iface MIXER
		name 'Lineout volume control'
		value 26
		comment {
			access 'read write'
			type INTEGER
			count 1
			range '0 - 31'
		}
	}
	control.7 {
		iface MIXER
		name 'ADC input gain ctrl'
		value 3
		comment {
			access 'read write'
			type INTEGER
			count 1
			range '0 - 7'
		}
	}
	control.8 {
		iface MIXER
		name 'Audio linein in'
		value false
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
	control.9 {
		iface MIXER
		name 'Audio lineout'
		value true
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
	control.10 {
		iface MIXER
		name 'Audio adda drc'
		value false
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
	control.11 {
		iface MIXER
		name 'Audio adda loop'
		value false
		comment {
			access 'read write'
			type BOOLEAN
			count 1
		}
	}
	control.12 {
		iface MIXER
		name 'audio capture mode'
		value 'main mic'
		comment {
			access 'read write'
			type ENUMERATED
			count 1
			item.0 'main mic'
			item.1 mic1_2
			item.2 linein
		}
	}
}
state.sndhdmi {
	control.1 {
		iface MIXER
		name 'hdmi audio format Function'
		value pcm
		comment {
			access 'read write'
			type ENUMERATED
			count 1
			item.0 null
			item.1 pcm
			item.2 AC3
			item.3 MPEG1
			item.4 MP3
			item.5 MPEG2
			item.6 AAC
			item.7 DTS
			item.8 ATRAC
			item.9 ONE_BIT_AUDIO
			item.10 DOLBY_DIGITAL_PLUS
			item.11 DTS_HD
			item.12 MAT
			item.13 WMAPRO
		}
	}
}

 

Is the "dmesg"-command showing some boottime trouble? 

dmesg | egrep -i "alsa|snd"
[    1.638032] asoc: sndcodec <-> sunxi-codec mapping ok
[    1.640820] [I2S]snddaudio cannot find any using configuration for controllers, return directly!
[    1.647937] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
[    1.871625] ALSA device list:
[    1.871655]   #1: sndhdmi

 

But "aplay -l" delivers me this: 

aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: audiocodec [audiocodec], device 0: SUNXI-CODEC sndcodec-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: sndhdmi [sndhdmi], device 0: SUNXI-HDMIAUDIO sndhdmi-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0


I´m totally confused and don´t know how to go on. Anyone with a helpful solution for my issue?

 

 

Cheers,
Lelo
 

Link to comment
Share on other sites
Igor

Igor

Posted
Posted
33 minutes ago, Lelo said:

How did you get to a 4.x kernel? "apt-get dist-upgrade" leaves me at a 3.x kernel (that was the way i was told to do).

 

apt update & upgrade updates your current (3.x) kernel, not an alternative one. Take a look here to understand little more. You need to use a beta repository or nightly image to use/switch to this kernel in a simple fashion.

Link to comment
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines

  I accept