Jump to content

Nano Pi Neo Plus 2 SD Card boot issue


Tony Mauro

Recommended Posts

Hi,

 

I've tried setting up an SD Card to boot from and I'm getting the strangest issues.  I've tried multiple images and even compiled my own and I'm getting the same issue.  I'm booting from SD Card because I have the stock ubuntu running on the emmc right now and I don't want to flash that until I know the image works the way I want it to.

 

Here are the logs I've got from the console on boot.   I followed the directions with 7z and Etcher from the documentation page.  Thanks for the help!

 

starting USB...
USB0:   USB EHCI 1.00
USB1:   USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Autoboot in 1 seconds, press <Space> to stop
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
3100 bytes read in 196 ms (14.6 KiB/s)
## Executing script at 4fc00000
U-boot loaded from SD
Boot script loaded from mmc
143 bytes read in 158 ms (0 Bytes/s)
** File not found /boot/dtb/allwinner/sun50i-h5-nanopi-neo-plus2.dtb **
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
504 bytes read in 529 ms (0 Bytes/s)
Applying kernel provided DT overlay sun50i-h5-usbhost1.dtbo
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
504 bytes read in 538 ms (0 Bytes/s)
Applying kernel provided DT overlay sun50i-h5-usbhost2.dtbo
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
Error applying DT overlays, restoring original DT
** File not found /boot/dtb/allwinner/allwinner/sun50i-h5-nanopi-neo-plus2.dtb **
5254590 bytes read in 528 ms (9.5 MiB/s)
12957704 bytes read in 897 ms (13.8 MiB/s)
## Loading init Ramdisk from Legacy Image at 4fe00000 ...
   Image Name:   uInitrd
   Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
   Data Size:    5254526 Bytes = 5 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
ERROR: Did not find a cmdline Flattened Device Tree
Could not find a valid device tree
SCRIPT FAILED: continuing...
switch to partitions #0, OK
mmc1(part 0) is current device
Scanning mmc 1:1...
Found U-Boot script /boot.scr
reading /boot.scr
850 bytes read in 20 ms (41 KiB/s)
## Executing script at 4fc00000
** Unrecognized filesystem type **
** Unrecognized filesystem type **
** Unrecognized filesystem type **
libfdt fdt_check_header(): FDT_ERR_BADMAGIC
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
No FDT memory address configured. Please configure
the FDT address via "fdt addr <address>" command.
Aborting!
Bad Linux ARM64 Image magic!
SCRIPT FAILED: continuing...

Device 0: device type unknown
... is now current device
** Bad device usb 0 **
** Bad device usb 0 **
No ethernet found.
missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-sunxi
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default
No ethernet found.
Config file not found
No ethernet found.
No ethernet found.
=>
 

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines