Jump to content

oPI-PC+ wifi hotspot doesn't show up


andrejmoltok

Recommended Posts

Hi,

 

my problem is that I can't figure out why doesn't wifi access point doesn't show up, after setting up neither with Config utility from the desktop, neither manually from the website documentations help. What am I missing here?

 

First, the Config utility that I'm using it asks me to reboot every time I set it up successfully, but after reboot it doesn't appear anywhere, neither my smartphone won't find the ARMBIAN connection.

 

Second, I tried the way it is documented on the websites help section on how to set up an access point. I've changed the required files with nano, copied and nothing.

 

I haven't used wired internet connection just using my home wifi connection to expand to a hotspot.

Can anyone help me out with this? I want to use the orange pi as wifi range repeater, because my original wi-fi routers' range is just not enough for the whole house.

Link to comment
Share on other sites

I will try as soon as possible, but now I have another issue.

 

I wanted to make a system install to USB pendrive, but aborted it, not I managed to check out what may be the problem with the help of uart and the following came out:

Quote

ock ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
Begin: Running /scripts/local-block ... done.
done.
Gave up waiting for root device.  Common problems:
 - Boot args (cat /proc/cmdline)
   - Check rootdelay= (did the system wait long enough?)
   - Check root= (did the system wait for the right device?)
 - Missing modules (cat /proc/modules; ls /dev)
ALERT!  UUID=e59363f1-765c-4660-9275-4563bb872371 does not exist.  Dropping to a shell!
Rebooting automatically due to panic= boot argument
[   69.860443] Restarting system.
[   69.863951] Restarting Linux version 3.4.113-sun8i (root@devel) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #18 SMP PREEMPT Thu Jun 15 02:16:06 CEST 2017
[   69.863963]

U-Boot SPL 2017.05-armbian (Jun 15 2017 - 03:36:18)
DRAM: 1024 MiB
Trying to boot from MMC2


U-Boot 2017.05-armbian (Jun 15 2017 - 03:36:18 +0200) Allwinner Technology

CPU:   Allwinner H3 (SUN8I 1680)
Model: Xunlong Orange Pi PC Plus
I2C:   ready
DRAM:  1 GiB
MMC:   SUNXI SD/MMC: 1, SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   phy interface0
eth0: ethernet@1c30000
Hit any key to stop autoboot:  0
38518 bytes read in 188 ms (199.2 KiB/s)
Unknown command 'bmp' - try 'help'
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
3565 bytes read in 205 ms (16.6 KiB/s)
## Executing script at 43100000
U-boot loaded from eMMC or secondary SD
Boot script loaded from mmc
136 bytes read in 153 ms (0 Bytes/s)
5914640 bytes read in 538 ms (10.5 MiB/s)
4750952 bytes read in 400 ms (11.3 MiB/s)
Found legacy kernel configuration
36392 bytes read in 450 ms (78.1 KiB/s)
## Loading init Ramdisk from Legacy Image at 43300000 ...
   Image Name:   uInitrd
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    5914576 Bytes = 5.6 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

Starting kernel ...

[sun8i_fixup]: From boot, get meminfo:
        Start:  0x40000000
        Size:   1024MB
ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1
ion_reserve_select: ion chipid  [0x2c00081!
ion_reserve_common: ion reserve: [0x50000000, 0x60000000]!
Loading, please wait...
starting version 229
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
done.

 

It goes in cycles, like the system would be corrupted or something.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines