Jump to content

No HDMI output on Orangepi plus2e


cocco

Recommended Posts

hi i have problem with orangepi plus2e

i have not image on hdmi

i atach some logs from Tera Term (serial terminal)

witout sd

 

HELLO! BOOT0 is starting!
boot0 version : 4.2.0
boot0 commit : c8c201b51b7ea1baa94590a1887313124d9a5879

fel_flag = 0x00000000
rtc[0] value = 0x00000000
rtc[1] value = 0x00000000
rtc[2] value = 0x00000000
rtc[3] value = 0x00000000
rtc[4] value = 0x00000000
rtc[5] value = 0x00000000
rtc[6] value = 0x00000000
rtc[7] value = 0x00000000
DRAM DRIVE INFO: V1.4
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
the chip id is 0x00000081
NOT GATE MODE
READ DQS LCDL = 001e1d1e
DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
DRAM CLK = 672 MHz
DRAM zq value: 003b3bfb
DRAM dram para1: 11040800
DRAM dram para2: 00000000
DRAM workmode1: 000009f4
DRAM SIZE =2048 M
odt delay
dram size =2048
card boot number = 2
card no is 2
sdcard 2 line count 8
[mmc]: mmc driver ver 2015-04-13 16:07:39
[mmc]: ***Try SD card 2***
[mmc]: mmc 2 cmd 8 err 00000100
[mmc]: mmc 2 cmd 8 err 00000100
[mmc]: mmc 2 send if cond failed
[mmc]: mmc 2 cmd 55 err 00000100
[mmc]: mmc 2 cmd 55 err 00000100
[mmc]: mmc 2 send app cmd failed
[mmc]: ***Try MMC card 2***
[mmc]: mmc re-update_phase
[mmc]: mmc re-update_phase
[mmc]: 8bit ddr!!!
[mmc]: mmc re-update_phase
[mmc]: MMC ver 5.0
[mmc]: SD/MMC Card: 8bit, capacity: 14910MB
[mmc]: vendor: Man 00150100 Snr 00ec7165
[mmc]: product: AWPD3
[mmc]: revision: 5.2
[mmc]: ***SD/MMC 2 init OK!!!***
sdcard 2 init ok
The size of uboot is 000e4000.
sum=fc107a6e
src_sum=fc107a6e
set_mmc_para,sdly 50M 0
set_mmc_para,sdly 25M 0
Succeed in loading uboot from sdmmc flash.
Ready to disable icache.
Jump to secend Boot.
SUNXI_NORMAL_MODE
[      0.276]e mode

U-Boot 2011.09-rc1-00024-gdbed064 (Nov 30 2015 - 20:18:20) Allwinner Technology

[      0.285]version: 1.1.0
[      0.288]uboot commit : dbed064f3b1a936e4e374a6284944f4e4e30e9ae

not using multi config
normal mode
[      0.301]pmbus:   ready
not set main pmu id
axp_probe error
[board_vendor] vid_used not used
[      0.319]PMU: pll1 1008 Mhz,PLL6=600 Mhz
AXI=336 Mhz,AHB=200 Mhz, APB1=100 Mhz
sid read already
fel key new mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
normal mode
[      0.350]DRAM:  2 GiB
relocation Offset is: 75af1000
[box standby] read rtc = 0x0
[box_start_os] mag be start_type no use
user_gpio config
user_gpio ok
gic: normal or no secure os mode
workmode = 0
MMC:     2
[      0.428][mmc]: mmc driver ver 2015-06-1 20:01:00
[      0.433][mmc]: get sdc_phy_wipe fail.
[      0.437][mmc]: get sdc0 sdc_erase fail.
[      0.441][mmc]: get sdc_2xmode ok, val = 1
[      0.445][mmc]: get sdc_ddrmode ok, val = 1
[      0.449][mmc]: get sdc_f_max fail,use default  50000000Hz
[      0.455][mmc]: get card_line ok, card_line = 8
[      0.459][mmc]: get sdc_ex_dly_used fail,use default
[      0.464][mmc]: SUNXI SD/MMC: 2
[      0.478][mmc]: *Try SD card 2*
[      0.481][mmc]: mmc 2 cmd 8 err 100
[      0.487][mmc]: mmc send if cond failed
[      0.491][mmc]: mmc 2 cmd 55 err 100
[      0.496][mmc]: send app cmd failed
[      0.499][mmc]: *Try MMC card 2*
[      0.541][mmc]: mmc re-update_phase
[      0.546][mmc]: mmc re-update_phase
[      0.551][mmc]: mmc re-update_phase
[      0.556][mmc]: ddr8
[      0.558][mmc]: mmc re-update_phase
[      0.575][mmc]: CID 0x15010041 0x57504433 0x5200ec71 0x65a21377
[      0.580][mmc]: MMC ver 5.0
[      0.583][mmc]: mmc clk 50000000
[      0.586][mmc]: SD/MMC Card: 8bit, capacity: 14910MB
[      0.592][mmc]: boot0 capacity: 4000KB,boot1 capacity: 4000KB
[      0.597][mmc]: ***SD/MMC 2 init OK!!!***
[      0.602][mmc]: erase_grp_size:0x400WrBlk * 0x200 = 0x80000 Byte
[      0.608][mmc]: secure_feature 0x55
[      0.611][mmc]: secure_removal_type  0x9
[      0.615]sunxi flash init ok
script config pll_de to 864 Mhz
Not Found clk pll_video1 in script
script config pll_video to 297 Mhz
script config pll_periph0 to 600 Mhz
[boot]disp_init_tv
[DISP_TV] disp_init_tv enter g_tv_used
screen 0 do not support TV TYPE!
[BOOOT_DISP_TV] disp tv device_registered
unable to find regulator vcc-hdmi-18 from [pmu1_regu] or [pmu2_regu]
enable power vcc-hdmi-18, ret=-1
DRV_DISP_Init end
error: open tv_vdid.fex, maybe it is not exist
error: open disp_rsl.fex, maybe it is not exist
error: open disp_rsl.fex, maybe it is not exist
boot_disp.auto_hpd=1
auto hpd check has 0 times!
attched ok, mgr0<-->device0, type=4, mode=4----
ready to set mode
[      1.505]finally, output_type=0x4, output_mode=0x4, screen_id=0x0, disp_para=0x404
In:    serial
Out:   serial
Err:   serial
--------fastboot partitions--------
-total partitions:14-
-name-        -start-       -size-
bootloader  : 1000000       1000000
env         : 2000000       1000000
boot        : 3000000       1000000
system      : 4000000       30000000
misc        : 34000000      1000000
recovery    : 35000000      2000000
sysrecovery : 37000000      30000000
private     : 67000000      1000000
Reserve0    : 68000000      1000000
klog        : 69000000      1000000
Reserve1    : 6a000000      2000000
Reserve2    : 6c000000      1000000
cache       : 6d000000      28000000
UDISK       : 95000000      0
-----------------------------------
base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_mmc
key 0
cant find rcvy value
cant find fstbt value
misc partition found
to be run cmd=run setargs_mmc boot_normal
read item0 copy0
Item0 (Map) magic is bad
the secure storage item0 copy0 is bad
read item0 copy1
Item0 (Map) magic is bad
the secure storage item0 copy0 == copy1, the data is good
Item0 (Map) magic is bad

 

can help me pls

 

tnx

 

 

 

Link to comment
Share on other sites

Armbian_5.35_Orangepiplus2e_Ubuntu_xenial_default_3.4.113_desktop
_________________________________________________________________


U-Boot SPL 2017.09-armbian (Nov 22 2017 - 16:50:56)
DRAM: 2048 MiB
Trying to boot from MMC1


U-Boot 2017.09-armbian (Nov 22 2017 - 16:50:56 +0100) Allwinner Technology

CPU:   Allwinner H3 (SUN8I 1680)
Model: Xunlong Orange Pi Plus 2E
DRAM:  2 GiB
MMC:   SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
*** Warning - bad CRC, using default environment

In:    serial
Out:   vidconsole
Err:   vidconsole
Net:   phy interface7
eth0: ethernet@1c30000
230454 bytes read in 203 ms (1.1 MiB/s)
starting USB...
USB0:   USB EHCI 1.00
USB1:   USB OHCI 1.0
USB2:   USB EHCI 1.00
USB3:   USB OHCI 1.0
USB4:   USB EHCI 1.00
USB5:   USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
scanning bus 4 for devices... 2 USB Device(s) found
scanning bus 1 for devices... 1 USB Device(s) found
scanning bus 3 for devices... 2 USB Device(s) found
scanning bus 5 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Autoboot in 1 seconds, press <Space> to stop
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
3708 bytes read in 209 ms (16.6 KiB/s)
## Executing script at 43100000
U-boot loaded from SD
Boot script loaded from mmc
154 bytes read in 160 ms (0 Bytes/s)
5173329 bytes read in 528 ms (9.3 MiB/s)
4751880 bytes read in 526 ms (8.6 MiB/s)
Found legacy kernel configuration
36808 bytes read in 560 ms (63.5 KiB/s)
## Loading init Ramdisk from Legacy Image at 43300000 ...
   Image Name:   uInitrd
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    5173265 Bytes = 4.9 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK

Starting kernel ...

[sun8i_fixup]: From boot, get meminfo:
        Start:  0x40000000
        Size:   2048MB
ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1
ion_reserve_select: ion chipid  [0x2c00081!
ion_reserve_common: ion reserve: [0xb0000000, 0xc0000000]!
<6Loading, please wait...
starting version 229
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
done.
Begin: Will now check root file system ... fsck from util-linux 2.27.1
[/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1
/dev/mmcblk0p1: recovering journal
/dev/mmcblk0p1: clean, 113395/181792 files, 531197/727040 blocks
done.
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.

Welcome to Ubuntu 16.04.3 LTS!

[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Created slice System Slice.
[  OK  ] Listening on fsck to fsckd communication Socket.
[  OK  ] Listening on Journal Audit Socket.
[  OK  ] Listening on Journal Socket (/dev/log).
[  OK  ] Created slice User and Session Slice.
[  OK  ] Reached target Swap.
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Started Trigger resolvconf update for networkd DNS.
[  OK  ] Reached target User and Group Name Lookups.
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Reached target Paths.
[  OK  ] Listening on udev Control Socket.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Reached target Slices.
[  OK  ] Listening on Syslog Socket.
[  OK  ] Reached target Encrypted Volumes.
[  OK  ] Set up automount Arbitrary Executab...ats File System Automount Point.
[  OK  ] Listening on Journal Socket.
         Starting Load Kernel Modules...
         Mounting POSIX Message Queue File System...
         Starting Nameserver information manager...
         Starting Restore / save the current clock...
         Mounting Debug File System...
         Starting Create list of required st... nodes for the current kernel...
         Starting Remount Root and Kernel File Systems...
         Starting Set console keymap...
[  OK  ] Reached target Remote File Systems (Pre).
[  OK  ] Reached target Remote File Systems.
[  OK  ] Mounted Debug File System.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Started Load Kernel Modules.
[  OK  ] Started Restore / save the current clock.
[  OK  ] Started Create list of required sta...ce nodes for the current kernel.
[  OK  ] Started Remount Root and Kernel File Systems.
[  OK  ] Started Set console keymap.
[  OK  ] Started Nameserver information manager.
         Starting udev Coldplug all Devices...
         Starting Load/Save Random Seed...
         Starting Create Static Device Nodes in /dev...
         Mounting FUSE Control File System...
         Starting Apply Kernel Variables...
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started Create Static Device Nodes in /dev.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Reached target Local File Systems (Pre).
         Mounting /tmp...
         Starting udev Kernel Device Manager...
[  OK  ] Mounted /tmp.
[  OK  ] Reached target Local File Systems.
         Starting Set console font and keymap...
         Starting Armbian enhanced Log2Ram...
[  OK  ] Started Entropy daemon using the HAVEGE algorithm.
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Reached target Sound Card.
[  OK  ] Found device /dev/ttyS0.
[  OK  ] Started Armbian enhanced Log2Ram.
[  OK  ] Found device /sys/subsystem/net/devices/eth0.
[  OK  ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
         Starting Journal Service...
         Starting Load/Save RF Kill Switch Status...
[  OK  ] Started Journal Service.
[  OK  ] Started Load/Save RF Kill Switch Status.
         Starting Flush Journal to Persistent Storage...
[  OK  ] Started Flush Journal to Persistent Storage.
         Starting Create Volatile Files and Directories...
[  OK  ] Started Create Volatile Files and Directories.
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Reached target System Initialization.
         Starting Armbian filesystem resize service...
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[FAILED] Failed to start Set console font and keymap.
See 'systemctl status console-setup.service' for details.
[  OK  ] Started Armbian filesystem resize service.
[  OK  ] Reached target Basic System.
         Starting System Logging Service...
         Starting Accounts Service...
         Starting Save/Restore Sound Card State...
         Starting Initializes zram swaping...
         Starting Avahi mDNS/DNS-SD Stack...
         Starting LSB: Load kernel modules needed to enable cpufreq scaling...
         Starting LSB: No Display Manager...
         Starting Login Service...
         Starting LSB: Armbian gathering hardware information...
[  OK  ] Reached target Network (Pre).
         Starting Raise network interfaces...
[  OK  ] Started ifup for eth0.
[  OK  ] Started Armbian first run tasks.
[  OK  ] Created slice system-getty.slice.
         Starting LSB: Start/stop sysstat's sadc...
[  OK  ] Started Regular background program processing daemon.
[  OK  ] Started D-Bus System Message Bus.
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
         Starting Network Manager...
         Starting Permit User Sessions...
[  OK  ] Started System Logging Service.
[  OK  ] Started Initializes zram swaping.
[  OK  ] Started Permit User Sessions.
[  OK  ] Started Save/Restore Sound Card State.
[  OK  ] Started LSB: No Display Manager.
[  OK  ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
[  OK  ] Started LSB: Start/stop sysstat's sadc.
[  OK  ] Started Network Manager.
[  OK  ] Started Login Service.
         Starting Network Manager Script Dispatcher Service...
         Starting Network Manager Wait Online...
         Starting Authenticate and Authorize Users to Run Privileged Tasks...
         Starting LSB: set CPUFreq kernel parameters...
         Starting Set console scheme...
[  OK  ] Started Network Manager Script Dispatcher Service.
[  OK  ] Started Set console scheme.
[  OK  ] Started Authenticate and Authorize Users to Run Privileged Tasks.
[  OK  ] Started Raise network interfaces.
[  OK  ] Started Accounts Service.
[  OK  ] Started LSB: set CPUFreq kernel parameters.
         Starting LSB: Set sysfs variables from /etc/sysfs.conf...
[  OK  ] Reached target Network.
         Starting OpenBSD Secure Shell server...
         Starting OpenVPN service...
[  OK  ] Started Unattended Upgrades Shutdown.
         Starting Hostname Service...
[  OK  ] Started OpenVPN service.
[  OK  ] Started OpenBSD Secure Shell server.
[  OK  ] Started Hostname Service.
[  OK  ] Started LSB: Set sysfs variables from /etc/sysfs.conf.
[  OK  ] Started LSB: Armbian gathering hardware information.
         Starting WPA supplicant...
[  OK  ] Started WPA supplicant.
         Starting Load/Save RF Kill Switch Status...
[  OK  ] Started Load/Save RF Kill Switch Status.
[  OK  ] Started Network Manager Wait Online.
[  OK  ] Reached target Network is Online.
         Starting /etc/rc.local Compatibility...
         Starting LSB: disk temperature monitoring daemon...
[  OK  ] Started Daily apt download activities.
[  OK  ] Started Daily apt upgrade and clean activities.
[  OK  ] Reached target Timers.
         Starting LSB: Advanced IEEE 802.11 management daemon...
         Starting LSB: Start NTP daemon...
[  OK  ] Started /etc/rc.local Compatibility.
[  OK  ] Started LSB: Advanced IEEE 802.11 management daemon.
[  OK  ] Started Serial Getty on ttyS0.
[  OK  ] Started Getty on tty1.
[  OK  ] Reached target Login Prompts.
[  OK  ] Started LSB: disk temperature monitoring daemon.
[  OK  ] Started LSB: Start NTP daemon.
[  OK  ] Reached target Multi-User System.
[  OK  ] Reached target Graphical Interface.
         Starting Update UTMP about System Runlevel Changes...
[  OK  ] Started Update UTMP about System Runlevel Changes.

Ubuntu 16.04.3 LTS orangepiplus2e ttyS0

orangepiplus2e login: root
Password:
You are required to change your password immediately (root enforced)
Changing password for root.
(current) UNIX password:
Enter new UNIX password:
Retype new UNIX password:
  ___                               ____  _         ____  _____
 / _ \ _ __ __ _ _ __   __ _  ___  |  _ \(_)  _    |___ \| ____|
| | | | '__/ _` | '_ \ / _` |/ _ \ | |_) | |_| |_    __) |  _|
| |_| | | | (_| | | | | (_| |  __/ |  __/| |_   _|  / __/| |___
 \___/|_|  \__,_|_| |_|\__, |\___| |_|   |_| |_|   |_____|_____|
                       |___/

Welcome to ARMBIAN 5.35 user-built Ubuntu 16.04.3 LTS 3.4.113-sun8i
System load:   1.74 0.45 0.15   Up time:       0 min
Memory usage:  2 % of 2014MB    IP:
CPU temp:      46°C
Usage of /:    75% of 2.8G

Warning: a reboot is needed to finish resizing the filesystem
Please reboot the system as soon as possible
New to Armbian? Check the documentation first: https://docs.armbian.com


Thank you for choosing Armbian! Support: www.armbian.com

Creating a new user account. Press <Ctrl-C> to abort
Desktop environment will not be enabled if you abort the new user creation

Please provide a username (eg. your forename): cocco
Trying to add user cocco
Adding user `cocco' ...
Adding new group `cocco' (1000) ...
Adding new user `cocco' (1000) with group `cocco' ...
Creating home directory `/home/cocco' ...
Copying files from `/etc/skel' ...
Enter new UNIX password:
Retype new UNIX password:
passwd: password updated successfully
Changing the user information for cocco
Enter the new value, or press ENTER for the default
        Full Name []:
        Room Number []:
        Work Phone []:
        Home Phone []:
        Other []:
Is the information correct? [Y/n] y

Dear cocco, your account cocco has been created and is sudo enabled.
Please use this account for your daily work from now on.


Your display settings are currently 720p (1280x720). To change this use the
h3disp utility. Do you want to change display settings now? [nY] n

Warning: a reboot is needed to finish resizing the filesystem
Please reboot the system now

root@orangepiplus2e:~#

root@orangepiplus2e:~# startx
xauth:  file /root/.Xauthority does not exist


X.Org X Server 1.18.4
Release Date: 2016-07-19
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.4.0-97-generic armv7l Ubuntu
Current Operating System: Linux orangepiplus2e 3.4.113-sun8i #4 SMP PREEMPT Wed Nov 22 13:45:28 CET 2017 armv7l
Kernel command line: root=UUID=c9935ecd-9814-4cd9-bfd4-5bf53ea6a1d6 rootwait rootfstype=ext4 console=tty1 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 loglevel=1 ubootpart=7010ec8c-01 ubootsource=mmc usb-storage.quirks= cma=96M  cgroup_enable=memory swapaccount=1
Build Date: 13 October 2017  01:59:44PM
xorg-server 2:1.18.4-0ubuntu0.7 (For technical support please see http://www.ubuntu.com/support)
Current version of pixman: 0.33.6
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 25 05:45:22 2017
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
modprobe: FATAL: Module g2d_23 not found in directory /lib/modules/3.4.113-sun8i
modprobe: FATAL: Module sunxi_cedar_mod not found in directory /lib/modules/3.4.113-sun8i
xf86: found device 0
xf86: found device 0

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines