sagt3k Posted February 10, 2018 Share Posted February 10, 2018 Hi to everyone, I'm using "Armbian_5.38_Orangepizeroplus_Debian_stretch_next_4.14.14" on a Orange Pi Zero Plus H5 I'd like to test this new board by working with processor overclocking. But it seems to me that it is leased at 816Mhz maximum. Can someone tell me how to take it to 1200Mhz or more? Thanks Antonio Link to comment Share on other sites More sharing options...
lomady Posted February 11, 2018 Share Posted February 11, 2018 There is no thermal control for H5 yet, so you really should know what you are doing. If you do - than you'll figure out how to change DVFS Link to comment Share on other sites More sharing options...
sagt3k Posted February 13, 2018 Author Share Posted February 13, 2018 On 2/11/2018 at 8:36 PM, lomady said: There is no thermal control for H5 yet, so you really should know what you are doing. If you do - than you'll figure out how to change DVFS Hi lomady, I'm a newbie on this subject. I would be interested bringing the core freq to 1GHz or more. Could you explain how to do it? An example of how to handle DVFS? Thanks Antonio Link to comment Share on other sites More sharing options...
Freiheld Posted March 8, 2018 Share Posted March 8, 2018 I run 4 my OrangePis Zero + H5 as AEON Miningrig, unfortunately they only run at 816MHz at a constant 30 ° -32 ° C. I would like to increase the clock to 1Ghz, changes over /etc/init.d/cpufrequtils are only possible up to 816MHz. How can I increase this easily? Regards Freiheld Link to comment Share on other sites More sharing options...
Recommended Posts