Jump to content
  • 0

Hummingboard2 som v1.5 stuck at 'Starting Kernel'


dalekuhn

Question

Hello. I have been running Armbian_5.41_Cubox-i_Ubuntu_xenial_next_4.15.7_desktop.img with no issues on my Hummingboard Edge which consists of rev 1.4 Hummingboard2 carrier and rev 1.5 SOM. I decided to try the legacy image (Armbian_5.41_Cubox-i_Ubuntu_xenial_default_3.14.79_desktop.img) to gain support for the hardware video decoder. However, I have been unable to get the legacy version to boot properly. Initially, the board is detected as having a rev 1.5 SOM and there is a message about not being able to find the right dtb file (imx6q-hummingboard2-som-v15.dtb). Looking under /boot/dtb there are no dtb files for the rev 1.5 SOM in the legacy image. So I copied the default imx6q-hummingboard2-som-v15.dtb from my 'next' image into the dtb folder of my legacy image. Now I no longer see the message about the missing dtb file, but the boot process stops at "Starting kernel ..." Does anyone have any ideas what may be the problem? Is the legacy image compatible with the rev 1.5 SOM? Thanks in advance to anyone that can help. I sure appreciate it.

 

Thanks,

Dale

Link to comment
Share on other sites

2 answers to this question

Recommended Posts

  • 0
1 hour ago, dalekuhn said:

So I copied the default imx6q-hummingboard2-som-v15.dtb from my 'next' image into the dtb folder of my legacy image.


This is not possible to work but hardware video acceleration is apparently possible to achieve on a modern kernel, but it is some work:
http://forum.solid-run.com/viewtopic.php?f=8&t=1573&start=530#p22805
http://forum.solid-run.com/viewtopic.php?f=10&t=1156&start=550#p22839

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines