CR_B Posted April 29, 2018 Share Posted April 29, 2018 Hello, I've try several version of armbian (stable, testing, debian, ubuntu) but I stopped at the same point : U-boot 2017.09-armbian (Nov 22 2017 - 16:49:59 +0100) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi PC Plus DRAM : 1GiB MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1 *** Warning - bad CRC, using default environment In : serial Out: vidconsole Err: vidconsole Net : phy interface0 eth0: ethernet@1c30000 With ethernet or without : no change With keybord, the five last lines aren't here Doesn't understand what this mean. Link to comment Share on other sites More sharing options...
Tido Posted April 30, 2018 Share Posted April 30, 2018 Try different, power supply. Try different SDcard, burn with etcher. Link to comment Share on other sites More sharing options...
CR_B Posted April 30, 2018 Author Share Posted April 30, 2018 It was the power supply. Thanks Link to comment Share on other sites More sharing options...
Recommended Posts