Jump to content

Failed to start X11 (MESA-LOADER Error)


Recommended Posts

Hey,

 

I've got an Orange Pi Zero Plus 2 (H3) with Armbian 5.41 and mainline 4.14.18 with Debian Stretch.

If I try to run X11 with:

sudo startx

I get the following error:

X.Org X Server 1.19.2
Release Date: 2017-03-02
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.9.0-4-armmp-lpae armv7l Debian
Current Operating System: Linux orangepizeroplus2 4.14.18-sunxi #24 SMP Fri Feb 9 16:24:32 CET 2018 armv7l
Kernel command line: root=UUID=bab2d356-e17e-4857-836a-5fc44cbf541f rootwait rootfstype=ext4 console=tty1 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 loglevel=1 ubootpart=451adcfc-01 ubootsource=mmc usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u   sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 cgroup_enable=memory swapaccount=1
Build Date: 16 October 2017  09:48:39AM
xorg-server 2:1.19.2-1+deb9u2 (https://www.debian.org/support) 
Current version of pixman: 0.34.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Wed May 16 19:22:28 2018
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
MESA-LOADER: failed to retrieve device information
gbm: failed to open any driver (search paths /usr/lib/arm-linux-gnueabihf/dri:${ORIGIN}/dri:/usr/lib/dri)
gbm: Last dlopen error: /usr/lib/dri/sun4i-drm_dri.so: cannot open shared object file: No such file or directory
failed to load driver: sun4i-drm
gbm: failed to open any driver (search paths /usr/lib/arm-linux-gnueabihf/dri:${ORIGIN}/dri:/usr/lib/dri)
gbm: Last dlopen error: /usr/lib/dri/kms_swrast_dri.so: cannot open shared object file: No such file or directory
failed to load driver: kms_swrast
gbm: failed to open any driver (search paths /usr/lib/arm-linux-gnueabihf/dri:${ORIGIN}/dri:/usr/lib/dri)
gbm: Last dlopen error: /usr/lib/dri/swrast_dri.so: cannot open shared object file: No such file or directory
failed to load swrast driver
couldn't get display device

 

I have an Orange Pi Zero (H3) with the same Armbian and Kernel version and there no error occurs.

 

Here is my Xorg.1.log:

Spoiler

[  3185.034] 
X.Org X Server 1.19.2
Release Date: 2017-03-02
[  3185.035] X Protocol Version 11, Revision 0
[  3185.035] Build Operating System: Linux 4.9.0-4-armmp-lpae armv7l Debian
[  3185.035] Current Operating System: Linux orangepizeroplus2 4.14.18-sunxi #24 SMP Fri Feb 9 16:24:32 CET 2018 armv7l
[  3185.035] Kernel command line: root=UUID=bab2d356-e17e-4857-836a-5fc44cbf541f rootwait rootfstype=ext4 console=tty1 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 loglevel=1 ubootpart=451adcfc-01 ubootsource=mmc usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u   sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 cgroup_enable=memory swapaccount=1
[  3185.035] Build Date: 16 October 2017  09:48:39AM
[  3185.035] xorg-server 2:1.19.2-1+deb9u2 (https://www.debian.org/support) 
[  3185.035] Current version of pixman: 0.34.0
[  3185.035] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  3185.035] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  3185.036] (==) Log file: "/var/log/Xorg.1.log", Time: Wed May 16 20:45:13 2018
[  3185.036] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  3185.036] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  3185.037] (==) No Layout section.  Using the first Screen section.
[  3185.037] (==) No screen section available. Using defaults.
[  3185.037] (**) |-->Screen "Default Screen Section" (0)
[  3185.037] (**) |   |-->Monitor "<default monitor>"
[  3185.038] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[  3185.038] (**) |   |-->Device "DeviceTFT"
[  3185.038] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  3185.038] (**) Option "BlankTime" "0"
[  3185.038] (**) Option "StandbyTime" "0"
[  3185.038] (**) Option "SuspendTime" "0"
[  3185.038] (**) Option "OffTime" "0"
[  3185.038] (==) Automatically adding devices
[  3185.038] (==) Automatically enabling devices
[  3185.038] (==) Automatically adding GPU devices
[  3185.038] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  3185.038] (WW) The directory "/usr/share/fonts/X11/misc" does not exist.
[  3185.038] 	Entry deleted from font path.
[  3185.038] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[  3185.038] 	Entry deleted from font path.
[  3185.038] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[  3185.038] 	Entry deleted from font path.
[  3185.038] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[  3185.038] 	Entry deleted from font path.
[  3185.038] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[  3185.038] 	Entry deleted from font path.
[  3185.038] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[  3185.038] 	Entry deleted from font path.
[  3185.038] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[  3185.038] 	Entry deleted from font path.
[  3185.038] (==) FontPath set to:
	built-ins
[  3185.038] (==) ModulePath set to "/usr/lib/xorg/modules"
[  3185.038] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  3185.038] (II) Loader magic: 0x5dcf60
[  3185.038] (II) Module ABI versions:
[  3185.038] 	X.Org ANSI C Emulation: 0.4
[  3185.038] 	X.Org Video Driver: 23.0
[  3185.038] 	X.Org XInput driver : 24.1
[  3185.039] 	X.Org Server Extension : 10.0
[  3185.041] (--) using VT number 2

[  3185.042] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[  3185.044] (II) xfree86: Adding drm device (/dev/dri/card0)
[  3185.044] (II) no primary bus or device found
[  3185.044] 	falling back to /sys/devices/platform/display-engine/drm/card0
[  3185.044] (II) LoadModule: "glx"
[  3185.045] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  3185.052] (II) Module glx: vendor="X.Org Foundation"
[  3185.052] 	compiled for 1.19.2, module version = 1.0.0
[  3185.052] 	ABI class: X.Org Server Extension, version 10.0
[  3185.052] (==) Matched modesetting as autoconfigured driver 0
[  3185.052] (==) Matched fbdev as autoconfigured driver 1
[  3185.053] (==) Assigned the driver to the xf86ConfigLayout
[  3185.053] (II) LoadModule: "modesetting"
[  3185.053] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  3185.054] (II) Module modesetting: vendor="X.Org Foundation"
[  3185.054] 	compiled for 1.19.2, module version = 1.19.2
[  3185.054] 	Module class: X.Org Video Driver
[  3185.054] 	ABI class: X.Org Video Driver, version 23.0
[  3185.054] (II) LoadModule: "fbdev"
[  3185.054] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[  3185.055] (II) Module fbdev: vendor="X.Org Foundation"
[  3185.055] 	compiled for 1.19.0, module version = 0.4.4
[  3185.055] 	Module class: X.Org Video Driver
[  3185.055] 	ABI class: X.Org Video Driver, version 23.0
[  3185.055] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  3185.055] (II) FBDEV: driver for framebuffer: fbdev
[  3185.057] (II) modeset(0): using drv /dev/dri/card0
[  3185.057] (WW) Falling back to old probe method for fbdev
[  3185.057] (II) Loading sub module "fbdevhw"
[  3185.057] (II) LoadModule: "fbdevhw"
[  3185.057] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[  3185.058] (II) Module fbdevhw: vendor="X.Org Foundation"
[  3185.058] 	compiled for 1.19.2, module version = 0.0.2
[  3185.058] 	ABI class: X.Org Video Driver, version 23.0
[  3185.058] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[  3185.059] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  3185.059] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[  3185.059] (==) modeset(0): RGB weight 888
[  3185.059] (==) modeset(0): Default visual is TrueColor
[  3185.059] (II) Loading sub module "glamoregl"
[  3185.059] (II) LoadModule: "glamoregl"
[  3185.059] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[  3185.086] (II) Module glamoregl: vendor="X.Org Foundation"
[  3185.086] 	compiled for 1.19.2, module version = 1.0.0
[  3185.086] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  3185.086] (II) glamor: OpenGL accelerated X.org driver based.
[  3185.088] couldn't get display device
[  3185.088] (EE) modeset(0): glamor initialization failed
[  3185.088] (II) modeset(0): ShadowFB: preferred NO, enabled NO
[  3185.088] (II) modeset(0): Output HDMI-1 has no monitor section
[  3185.089] (II) modeset(0): EDID for output HDMI-1
[  3185.089] (II) modeset(0): Output HDMI-1 disconnected
[  3185.089] (WW) modeset(0): No outputs definitely connected, trying again...
[  3185.089] (II) modeset(0): Output HDMI-1 disconnected
[  3185.089] (WW) modeset(0): Unable to find connected outputs - setting 1024x768 initial framebuffer
[  3185.089] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[  3185.089] (==) modeset(0): DPI set to (96, 96)
[  3185.089] (II) Loading sub module "fb"
[  3185.089] (II) LoadModule: "fb"
[  3185.089] (II) Loading /usr/lib/xorg/modules/libfb.so
[  3185.090] (II) Module fb: vendor="X.Org Foundation"
[  3185.090] 	compiled for 1.19.2, module version = 1.0.0
[  3185.090] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  3185.090] (II) UnloadModule: "fbdev"
[  3185.090] (II) Unloading fbdev
[  3185.090] (II) UnloadSubModule: "fbdevhw"
[  3185.090] (II) Unloading fbdevhw
[  3185.091] (==) Depth 24 pixmap format is 32 bpp
[  3185.094] (==) modeset(0): Backing store enabled
[  3185.094] (==) modeset(0): Silken mouse enabled
[  3185.094] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  3185.095] (==) modeset(0): DPMS enabled
[  3185.095] (WW) modeset(0): Option "fbdev" is not used
[  3185.095] (--) RandR disabled
[  3185.122] (II) SELinux: Disabled on system
[  3185.126] (II) AIGLX: Screen 0 is not DRI2 capable
[  3185.126] (EE) AIGLX: reverting to software rendering
[  3185.126] (EE) AIGLX error: dlopen of /usr/lib/arm-linux-gnueabihf/dri/swrast_dri.so failed (/usr/lib/arm-linux-gnueabihf/dri/swrast_dri.so: cannot open shared object file: No such file or directory)
[  3185.126] (EE) GLX: could not load software renderer
[  3185.126] (II) GLX: no usable GL providers found for screen 0
[  3185.127] (II) modeset(0): Damage tracking initialized
[  3185.449] (II) config/udev: Adding input device ADS7846 Touchscreen (/dev/input/event0)
[  3185.449] (**) ADS7846 Touchscreen: Applying InputClass "libinput touchscreen catchall"
[  3185.449] (**) ADS7846 Touchscreen: Applying InputClass "calibration"
[  3185.449] (II) LoadModule: "libinput"
[  3185.449] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[  3185.459] (II) Module libinput: vendor="X.Org Foundation"
[  3185.459] 	compiled for 1.19.0, module version = 0.23.0
[  3185.459] 	Module class: X.Org XInput Driver
[  3185.459] 	ABI class: X.Org XInput driver, version 24.1
[  3185.459] (II) Using input driver 'libinput' for 'ADS7846 Touchscreen'
[  3185.459] (**) ADS7846 Touchscreen: always reports core events
[  3185.459] (**) Option "Device" "/dev/input/event0"
[  3185.459] (**) Option "_source" "server/udev"
[  3185.462] (II) input device 'ADS7846 Touchscreen', /dev/input/event0 is tagged by udev as: Touchscreen
[  3185.462] (II) input device 'ADS7846 Touchscreen', /dev/input/event0 is a touch device
[  3185.550] (**) Option "config_info" "udev:/sys/devices/platform/soc/1c69000.spi/spi_master/spi1/spi1.1/input/input0/event0"
[  3185.550] (II) XINPUT: Adding extended input device "ADS7846 Touchscreen" (type: TOUCHSCREEN, id 6)
[  3185.551] (**) Option "AccelerationScheme" "none"
[  3185.551] (**) ADS7846 Touchscreen: (accel) selected scheme none/0
[  3185.551] (**) ADS7846 Touchscreen: (accel) acceleration factor: 2.000
[  3185.551] (**) ADS7846 Touchscreen: (accel) acceleration threshold: 4
[  3185.551] (**) Option "TransformationMatrix" "0 1 0 -1 0 1 0 0 1"
[  3185.553] (II) input device 'ADS7846 Touchscreen', /dev/input/event0 is tagged by udev as: Touchscreen
[  3185.553] (II) input device 'ADS7846 Touchscreen', /dev/input/event0 is a touch device
[  3185.555] (II) config/udev: Adding input device ADS7846 Touchscreen (/dev/input/mouse0)
[  3185.555] (**) ADS7846 Touchscreen: Applying InputClass "calibration"
[  3185.555] (II) No input driver specified, ignoring this device.
[  3185.555] (II) This device may have been added with another device file.
[  3185.557] (II) config/udev: Adding input device RC for dw_hdmi (/dev/input/event1)
[  3185.557] (**) RC for dw_hdmi: Applying InputClass "libinput keyboard catchall"
[  3185.557] (II) Using input driver 'libinput' for 'RC for dw_hdmi'
[  3185.557] (**) RC for dw_hdmi: always reports core events
[  3185.557] (**) Option "Device" "/dev/input/event1"
[  3185.558] (**) Option "_source" "server/udev"
[  3185.559] (II) input device 'RC for dw_hdmi', /dev/input/event1 is tagged by udev as: Keyboard
[  3185.559] (II) input device 'RC for dw_hdmi', /dev/input/event1 is a keyboard
[  3185.630] (**) Option "config_info" "udev:/sys/devices/platform/soc/1ee0000.hdmi/rc/rc0/input1/event1"
[  3185.630] (II) XINPUT: Adding extended input device "RC for dw_hdmi" (type: KEYBOARD, id 7)
[  3185.630] (**) Option "xkb_model" "pc105"
[  3185.630] (**) Option "xkb_layout" "us"
[  3185.632] (II) input device 'RC for dw_hdmi', /dev/input/event1 is tagged by udev as: Keyboard
[  3185.632] (II) input device 'RC for dw_hdmi', /dev/input/event1 is a keyboard
[  3186.733] (II) UnloadModule: "libinput"
[  3186.733] (II) UnloadModule: "libinput"
[  3186.738] (II) Server terminated successfully (0). Closing log file.

 

 

I can't figure out whats the difference, maybe the HDMI? And how I can solve this problem.
I would appreciate any help.


Thanks :)

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines