Olimex Lime A20 Wont boot armbian
Hello everyone,
I'm having some isues with my olimex board. It boots fine on the images supplied by olimex. But the Armbian legacy images wont boot.
I have a serial connection to the board it hangs on the following line:
<6>axp20_ldo2: 1800 <--> 3300 mV at 3000 mV.
http://pastebin.com/nEHAiZHa
I need legacy for i2s support so mainline isnt an option.
I use the following board(tried 3 of these):
https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-LIME-4GB/open-
Previous solution copy image to nand. Somtimes imposible boot device to copy image.
There is another, which can help boot device:
1. Stop booting device by pressing "Enter" when u-boot starting.
2. Enter next commands
i2c mw 0x34 0x12 0x1f
i2c mw 0x34 0x29 0x00
i2c mw 0x34 0x12 0x5f
i2c mw 0x34 0x29 0x58
3. Continue booting by send command:
boot
4. In file /boot/boot.cmd add next lines:
i2c mw 0x34 0x12 0x1f
i2c mw