Hello everyone,   I'm having some isues with my olimex board. It boots fine on the images supplied by olimex. But the Armbian legacy images wont boot. I have a serial connection to the board it hangs on the following line: <6>axp20_ldo2: 1800 <--> 3300 mV at 3000 mV. http://pastebin.com/nEHAiZHa   I need legacy for i2s support so mainline isnt an option.   I use the following board(tried 3 of these): https://www.olimex.com/Products/OLinuXino/A20/A20-OLinuXino-LIME-4GB/open-