Ney Posted June 7, 2018 Share Posted June 7, 2018 Hi, I've burn "Armbian Stretch desktop legacy kernel 4.4.y" on sd card on use nand-sata-install on emmc but when I remove sd card it's no boot. I read on Pine forum we must put a jumper on "emmc pin" then remove 3/4s after power on. So I've try but no success. I can see emmc when I boot from sd card but no more. Link to comment Share on other sites More sharing options...
Igor Posted June 8, 2018 Share Posted June 8, 2018 6 hours ago, Ney said: 've burn "Armbian Stretch desktop legacy kernel 4.4.y" on sd card on use nand-sata-install on emmc but when I remove sd card it's no boot. No, this way does not work yet. You need to burn an image directly to the eMMC (with SD card adaptor). Then it works. Link to comment Share on other sites More sharing options...
Ney Posted June 8, 2018 Author Share Posted June 8, 2018 Ho no ! It was the last piece of my Armbian puzzle ! I search adaptater on the web but I guess it's specific to Pine64. So I'll order one from Pine64 and wait.... :-) Thanks a lot for your response. Link to comment Share on other sites More sharing options...
Igor Posted June 8, 2018 Share Posted June 8, 2018 1 hour ago, Ney said: I search adaptater on the web but I guess it's specific to Pine64. So I'll order one from Pine64 and wait.... :-) Odroid's adapter is compatible If you have one around. BTW. Nice setup! Link to comment Share on other sites More sharing options...
Recommended Posts