rufik Posted July 19, 2018 Share Posted July 19, 2018 I have OPI 2 running latest armbian mainline with MQTT broker and home assistant only. And I've started to experience hard freezes that only power re-plug helps :/ At first I thought that only networking was gone, but I've triggered hearbeat on red onboard led and this led is just stopping blinking on freezes. I've even got rid of Network Manager and setup iface in old good way via /etc/networking/interfaces. Then I've connected to serial console, run minicom in screen with logging to file. Just to see if serial console would show some kernel panic or so...but nothing, no output on serial console. Anyone experienced such behaviour? How to debug it? My second sbc - OPI PC - just started doing the same...irregular freezes. Output from armianmonitor: http://ix.io/1hIf Link to comment Share on other sites More sharing options...
Recommended Posts