Hi. I've ordererd a new bunch of espresso bins from globalscale.
they have the same board revision as my old ones (V5_0_1 and 1G 2CS) - but now I get an error while trying to flash armbian uboot (mentioned in https://www.armbian.com/espressobin/)
Marvell>> bubt espresso/flash-image-1g-2cs-800_800_boot_sd_and_usb.bin spi tftp
Burning U-BOOT image "espresso/flash-image-1g-2cs-800_800_boot_sd_and_usb.bin" from "tftp" to "spi"
Using n
So, I just checked that I could use the images in this folder to flash the current ones in its grand-parent one, and that I still was able to boot from the Armbian already installed in my SD card with a Macronix chip. Thanks a lot for these fixed images!
Steps:
Had to use miniterm:
miniterm --eol CR /dev/ttyUSB0 115200
rather than minicom. Minicom would interfere with the transfer from WtpDownload by trying to reopen the serial port once it had lost it; and then WtpDownlo