The build script will automatically update and pull the changes from github before the menu comes up. Simply run ./compile.sh   Edit: Nope....mainline kernel is still an issue   U-Boot SPL 2018.09-rc1-armbian (Sep 28 2018 - 18:39:47 +0200) DRAM: 1024 MiB Trying to boot from MMC1 NOTICE: BL31: v1.5(debug):5069c1c NOTICE: BL31: Built : 14:47:15, Sep 9 2018 NOTICE: BL31: Detected Allwinner H6 SoC (1728) INFO: ARM GICv2 driver initialized NOTICE: PMIC: Probing AXP805 NOTICE: PMIC: AXP805 detected INFO: BL31: Platform setup done INFO: BL31: Initializing runtime services INFO: BL31: cortex_a53: CPU workaround for 855873 was applied INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x4a000000 INFO: SPSR = 0x3c9 U-Boot 2018.09-rc1-armbian (Sep 28 2018 - 18:39:47 +0200) Allwinner Technology CPU: Allwinner H6 (SUN50I) Model: OrangePi One Plus DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 Loading Environment from FAT... Unable to use mmc 0:1... Failed (-5) Using device 'sun50i_dw_hdmi', disp_uc_priv=0000000079f33320 sunxi_de3_init: device 'sunxi_de3' display won't probe (ret=-1) Using device 'sun50i_dw_hdmi', disp_uc_priv=0000000079f33320 sunxi_de3_init: device 'sunxi_de3' display won't probe (ret=-1) In: serial Out: serial Err: serial Net: No ethernet found. starting USB... No controllers found Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3090 bytes read in 13 ms (231.4 KiB/s) ## Executing script at 4fc00000 U-boot loaded from SD Boot script loaded from mmc 116 bytes read in 10 ms (10.7 KiB/s) 16689 bytes read in 30 ms (543 KiB/s) ** File not found /boot/dtb/allwinner/overlay/sun50i-h6-fixup.scr ** 5026188 bytes read in 524 ms (9.1 MiB/s) 13844488 bytes read in 1412 ms (9.3 MiB/s) ## Loading init Ramdisk from Legacy Image at 4fe00000 ... Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 5026124 Bytes = 4.8 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 4fa00000 Booting using the fdt blob at 0x4fa00000 Loading Ramdisk to 49b34000, end 49fff14c ... OK reserving fdt memory region: addr=4fa00000 size=6a000 Loading Device Tree to 0000000049ac7000, end 0000000049b33fff ... OK Setting up simplefb DE3 present but not probed Starting kernel ... [ 0.880733] Internal error: Oops: 96000004 [#1] SMP [ 0.885616] Modules linked in: [ 0.888674] CPU: 3 PID: 36 Comm: kworker/3:1 Not tainted 4.18.10-sunxi64 #1 [ 0.895628] Hardware name: Orange Pi One+ (DT) [ 0.900079] Workqueue: events deferred_probe_work_func [ 0.905215] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 0.910005] pc : sun8i_dwmac_probe+0x164/0x518 [ 0.914446] lr : sun8i_dwmac_probe+0x20c/0x518 [ 0.918885] sp : ffff00000907bb30 [ 0.922196] x29: ffff00000907bb30 x28: 0000000000000000 [ 0.927506] x27: 0000000000000000 x26: ffff000008b7d790 [ 0.932817] x25: ffff800037fe4558 x24: ffff800036ac4010 [ 0.938127] x23: ffff800036ac4000 x22: ffff800034e5d018 [ 0.943437] x21: ffff8000352fbe98 x20: ffff000008bcf000 [ 0.948746] x19: ffff000008d08000 x18: 0000000000008000 [ 0.954056] x17: ffff0000089f8c98 x16: ffff0000089f8c98 [ 0.959366] x15: ffff800037fdf600 x14: ffff000008c0d000 [ 0.964675] x13: 00000000000000e0 x12: 0000000000000030 [ 0.969985] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f [ 0.975295] x9 : 6061686d68656d68 x8 : ffff00000907b808 [ 0.980604] x7 : 0000000000000000 x6 : 0000000000000003 [ 0.985914] x5 : 0000000000000002 x4 : 0000000000000003 [ 0.991223] x3 : 0000000000000000 x2 : ffff00000907bba0 [ 0.996533] x1 : ffff800034e5d400 x0 : ffff800036ac4010 [ 1.001844] Process kworker/3:1 (pid: 36, stack limit = 0x(____ptrval____)) [ 1.008799] Call trace: [ 1.011247] sun8i_dwmac_probe+0x164/0x518 [ 1.015343] platform_drv_probe+0x50/0xa0 [ 1.019352] driver_probe_device+0x21c/0x2f8 [ 1.023621] __device_attach_driver+0x98/0xf0 [ 1.027979] bus_for_each_drv+0x64/0xc8 [ 1.031814] __device_attach+0xd8/0x130 [ 1.035648] device_initial_probe+0x10/0x18 [ 1.039829] bus_probe_device+0x90/0x98 [ 1.043664] deferred_probe_work_func+0x9c/0x140 [ 1.048283] process_one_work+0x1e8/0x338 [ 1.052292] worker_thread+0x240/0x478 [ 1.056041] kthread+0x128/0x130 [ 1.059270] ret_from_fork+0x10/0x18 [ 1.062847] Code: f94012a3 9101c3a2 aa1803e0 f9400463 (a9401464) [ 1.068937] ---[ end trace bd9dc8f0489fd612 ]--- [ 1.121726] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.133153] mmc0: new high speed SDHC card at address 0001 [ 1.139547] mmcblk0: mmc0:0001 00000 14.6 GiB [ 1.146240] mmcblk0: p1