nand-sata-install not working : Partition too small

[Antony Abi Rached]

Hello,

 

I am using nanoPi Neo Core with mini shield nanoPi NEO CORE/CORE2. 

The OS that i am using is Armbian stretch downloaded from this link : https://www.armbian.com/nanopi-neo/

What I am trying to do is boot the OS from the SD card and have the filesystem on a SSD disk.

In order to do that, I created a primary partiton on the disk using parted.

Then I formatted the partition to ext4.

I tried to execute nand-sata-install script using armbian-config.

When I choose to boot from SD card system on SATA, the partiton of the disk that I created is found.

When I select the partition, I got an error that the partition is too small.

In fact the partition that i created have a size of 55GB. So for sure the partition is not too small.

 

What could be the cause of this problem?

Thanks in advance.

 

Regards,

Antony 

[Antony Abi Rached]

I solved this problem.

In fact I was mounting the SSD disk before running the nand-sata-install script. I should not mount it!

From the other side the script didn't work for me. I putted the problem that I am facing on the following issue :