Jump to content

Orange Pi Plus 2 3TB HDD over Sata just 746GB


pi_sbc56

Recommended Posts

Hi,

I've been using armbian in combination with openmediavault for the last years to access my files on an 1TB HDD.
Today I wanted to upgrade the drive to a 3 TB one, but it just shows a capacity 746GB.
Is there a size limit on the GL830 for harddrives or why isn't the real capacity showing up?

fdisk-l:
 

Disk /dev/sda: 746.5 GiB, 801569724416 bytes, 1565565868 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Thanks in advance

Regards,
Joshua

Link to comment
Share on other sites

That is strange. Please provide:

armbianmonitor -u

Here is my 8TB attached to, well, true SATA ... but that is irrelevant.

 _   _      _ _           _  _   
| | | | ___| (_) ___  ___| || |  
| |_| |/ _ \ | |/ _ \/ __| || |_ 
|  _  |  __/ | | (_) \__ \__   _|
|_| |_|\___|_|_|\___/|___/  |_|  
                                 
Welcome to Armbian - Stretch (2018.10) Linux 4.14.74-mvebu

System load:   0.02 0.04 0.00   Up time:       41 days
Memory usage:  3 % of 2018MB    IP:            172.16.100.37
CPU temp:      22°C           
Usage of /:    69% of 15G       storage/:      12% of 7.3T  

 

Link to comment
Share on other sites

Hi,

this is my armbianmonitor link: http://ix.io/1u5y

I've tried bionic and stretch, both with the same result, sda has 746GB But with stretch fdisk -l shows a size of 2TB?!
I'll download an old debian image from the orangepi site and test if the same problem occurs.
Do you have any ideas?

Regards
Joshua

 

 

 

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines